Felicity Solar IVPS10048P2G1

InvertersModel IVPS10048P2G1

Felicity Solar IVPS10048P2G1 8000W Inverter / Charger

A 48V inverter/charger holding 8000W continuous from a 10000VA rating, with split-phase 110/120Vac±5% output on HOT1-N or HOT2-N and 90% peak efficiency.

  • Rated Output Power (Va): 10000VA
  • Rated Output Power (W): 8000W

Choose the Rated Output Power (VA)

What sets the IVPS10048P2G1 apart from the other model in the family: Output split-phase system, make sure no "PAL", 3P1, 3P2; Rated Output Power (VA) 10000VA; Rated Output Power (W) 8000W; Max Charge Current 80A; Charge Current Regulation 0-80A; Surge Rating 20000VA for 5 seconds; Product Dimension 584x420x195mm; Package Dimension 670x470x355mm.

AED 1,750incl. VAT

In stock

  • Delivered within 3 business days, door to door, to every market we serve.
  • Dispatched the same business day for an order placed before 21:00 (Dubai time), or the next business day after.
  • Delivery charge: AED 340
  • 2-year warranty
Full SpecificationsDownload datasheet (PDF)

Felicity Solar IVPS10048P2G1 8000W Inverter / Charger features

  • 10000VA rated, 8000W continuous

    Rated 10000VA and 8000W continuous from a 48V nominal DC input.

  • 20000VA surge for 5 seconds

    Carries a 20000VA surge for 5 seconds and is rated to start electric motors.

  • 80A maximum charge current

    Charges at up to 80A, regulated anywhere across 0-80A, with over-charge protection.

  • Split-phase 110/120Vac±5% output

    Delivers split-phase 110/120Vac±5% on HOT1-N or HOT2-N from a 220Vac nominal input.

  • 15ms (typical) transfer time

    Transfers in 15ms (typical) and charges from utility anywhere in the 90-280Vac range.

  • 584 x 420 x 195 mm, 67.7 kg gross

    Measures 584 x 420 x 195 mm at 67.7 kg gross and operates from 0°C~40°C.

About the Felicity Solar IVPS10048P2G1 8000W Inverter / Charger

The Felicity Solar IVPS10048P2G1 is a 48V off-grid inverter and charger rated 10000VA and 8000W, holding a 20000VA surge for 5 seconds and charging a battery bank at up to 80A. It gives split-phase 110/120Vac±5% between HOT1-N or HOT2-N, regulated to ±5%rms, and transfers between utility and battery in 15ms (typical). Utility charging accepts 90-280Vac, disconnecting at 170±7Vac (UPS) or 90±7Vac (APL) on the low side and 280±7Vac on the high side; output is a pure sine wave and synchronises with input voltage in line mode. Battery settings cover 57.6V boost and 54.4V float on AGM, 58.4V and 55.2V on flooded, and 61.0V maximum on lithium, starting from 46V and shutting down at 43Vdc below 50% load. Peak efficiency is 90%, a 63A overcurrent protector guards the grid side, and the unit does not pass utility through without a battery. It measures 584 x 420 x 195 mm, weighs 67.7 kg gross and runs from 0°C~40°C. We are an authorised Felicity Solar distributor and supply the IVPS10048P2G1 from our own stock; warranty 2 Years.

Specifications last updated 23 July 2026

Felicity Solar IVPS10048P2G1 8000W Inverter / Charger full specifications

Electrical(61)

Battery0₁
Power0₁
BMS communication24V model(default 27.0V) bm5 6 bmS
Capable of Starting ElectricYes
Efficiency(Line mode)>95%
Max. Bypass Overload Current30A AC63A
Nominal Output Frequency(Hz)50±0.3Hz/60±0.3Hz(adjustable) backlight will go out after 60s.
Outputsplit-phase system, make sure no "PAL", 3P1, 3P2
Output Frequency50Hz
Output voltage25.0V to 31.5V. Increment of
Power derating216-06 221
Rated Output Power (VA)10000VA
Rated Output Power (W)8000W
Nominal DC Input Voltage48V
Input Voltage WaveformSinusoidal (utility or generator)
Terminal ConnectionHOT1-HOT2
Nominal Input Voltage220Vac
Low Line Disconnect170±7Vac (UPS) / 90±7Vac (APL)
Low Line Re-connect AC Input Range180±7Vac (UPS) / 100±7Vac (APL)
High Line Disconnect280±7Vac
High Line Re-connect270±7Vac
Max AC Input Voltage280Vrms
Nominal Input Frequency50Hz/60Hz
Low Line Frequency Disconnect40±1Hz
Low Line Frequency Re-connect42±1Hz
High Line Frequency Disconnect65±1Hz
High Line Frequency Re-connect63±1Hz
Line Mode Output WaveformSynchronize with input voltage
Over-Load ProtectionAir switch protection
Efficiency (Line mode)≥95%
Transfer Time (AC to DC)15ms (typical)
Transfer Time (DC to AC)15ms (typical) / 30ms (special)
Pass Through Without BatteryNo
Overcurrent Protector (grid)63A
Input Voltage Range (utility charge)90-280Vac
Max Charge Current80A
Charge Current Regulation0-80A
Charger Short Circuit63A
Over Charge ProtectionYes
Output Voltage WaveformPure sine wave
Nominal Output Voltage220/240Vac±5% (HOT1-HOT2)
Split-Phase Output Voltage110/120Vac±5% (HOT1-N or HOT2-N)
Nominal Output Frequency (Hz)50±0.3Hz / 60±0.3Hz (adjustable)
Output Voltage Regulation±5%rms
Peak Efficiency90%
Inverter Over-Load Protection (SMPS load)5s@≥150% load; 10s@105%~150% load
Surge Rating20000VA for 5 seconds
Capable of Starting Electric MotorYes
Output Short Circuit ProtectionYes
Min DC Starting Voltage46V
Low Battery Alarm46Vdc (load < 50%) / 44Vdc (load ≥ 50%)
Low Battery Recovery47Vdc (load < 50%) / 46Vdc (load ≥ 50%)
Low DC Input Shut-down43Vdc (load < 50%) / 42Vdc (load ≥ 50%)
High DC Input Alarm / Fault63Vdc±0.4V
High DC Input Recovery62Vdc±0.4V
Boost Charging Voltage (AGM)57.6V
Float Charging Voltage (AGM)54.4V
Boost Charging Voltage (Flooded)58.4V
Float Charging Voltage (Flooded)55.2V
Self-Defined Charging Voltage (max)61.0V
Lithium Charging Voltage (max)61.0V

Mechanical(3)

Product Dimension584x420x195mm
Package Dimension670x470x355mm
Gross Weight67.7 kg

Environmental(2)

Operating temperature0°C~40°C
Storage temperature-15°C~60°C

Downloads & support

PDFThe manufacturer's sheet, to print or share

Troubleshooting & error codes

Looking up an error code on this FelicityESS IVPS3524P1G1-LV? Browse the full list of codes for this device, with the cause and recommended fix for each.

View error codes for this device →

Frequently Asked Questions

What is the output power of the IVPS10048P2G1?

10000VA and 8000W. The IVPS10048P2G1 is rated 10000VA apparent power and 8000W continuous, and carries a 20000VA surge for 5 seconds, which is why it is rated as capable of starting an electric motor. Peak efficiency is 90%.

What battery voltage and charge current does the IVPS10048P2G1 use?

48V nominal DC, charging at up to 80A and regulated across 0-80A. It starts from 46V, alarms at 46Vdc below 50% load or 44Vdc at 50% load and above, and shuts down at 43Vdc / 42Vdc. Lithium charging tops out at 61.0V; AGM boost is 57.6V and float 54.4V.

What are the dimensions and weight of the IVPS10048P2G1?

584 x 420 x 195 mm and 67.7 kg gross. Packaged it measures 670x470x355mm. The unit operates from 0°C~40°C and is stored between -15°C~60°C.

Can the IVPS10048P2G1 charge from a generator or an unstable grid?

90-280Vac is the accepted utility charging range, and the input waveform is sinusoidal from utility or generator. Nominal input is 220Vac at 50Hz/60Hz, transfer takes 15ms (typical), a 63A overcurrent protector guards the grid side, and the unit does not pass utility through without a battery connected.

Customer reviews