Felicity Solar IVGM7K6LP1G1 7600W Hybrid Inverter

Felicity Solar IVGM7K6LP1G1 7.6kW Single-Phase Hybrid Solar Inverter

Single-phase hybrid inverter rated 7.6 kW (7.6 kVA apparent), the IVGM7K6LP1G1 pushes up to 8.36 kW of AC, holds a 36 A maximum output current, and pairs 11.4 kW of recommended PV with 190 A of battery charging.

Rated Output Power: 7.6 kW
Max Efficiency: 97.6 %
Battery Voltage Range: 40-60 V
Phase: Single Phase

AED 1incl. VAT

In stock

Full Specifications Download datasheet (PDF)

Felicity Solar IVGM7K6LP1G1 7.6kW Single-Phase Hybrid Solar Inverter features

Rated 7.6 kW of output power, 7.6 kVA apparent, with a maximum AC output of 8.36 kW and a 36 A maximum output current

Two MPPT trackers accept 26+26 A across a 120-425 V tracking window, up to 500 V PV and 11.4 kW of recommended array power

Charges and discharges a 40-60 V Lead-Acid or Li-Ion battery at up to 190 A and 7.6 kW, with RS485 or CAN BMS communication

97.6% peak conversion efficiency and 99.9% MPPT efficiency, with total harmonic distortion held below 3%

7.6 kW of backup output at 40 A with a 10 ms transfer time, delivered at 220-230 V, 50/60 Hz over an L+N+PE connection

IP65 enclosure with smart cooling, -25 to 60 °C operation (derating above 45 °C), 33.5 kg net, wall-mounted, up to 6 units in parallel

About the Felicity Solar IVGM7K6LP1G1 7.6kW Single-Phase Hybrid Solar Inverter

The Felicity Solar IVGM7K6LP1G1 is a single-phase hybrid solar inverter rated at 7.6 kW, 7.6 kVA apparent, with a maximum AC output of 8.36 kW, a 36 A maximum output current and 11.4 kW of recommended PV capacity across two MPPT trackers, charging or discharging a 40-60 V battery at up to 190 A. Each tracker accepts 26+26 A over a 120-425 V window from a 380 V rated PV input, 500 V maximum, starting from 100 V; MPPT efficiency reaches 99.9% and peak conversion efficiency 97.6%. AC output is 220-230 V at 50/60 Hz on an L+N+PE connection, with distortion under 3%, a 10 ms transfer time and 7.6 kW of backup output at 40 A. Protection covers output over-current, over-power and short circuit, anti-islanding, GFCI, arc fault interruption (AFCI) and insulation resistance detection. The isolated, transformer-based unit is IP65-rated and smart-cooled, wall-mounted at 430 x 654 x 243 mm and 33.5 kg net, runs from -25 to 60 °C with derating above 45 °C, parallels to 6 units and reports over WiFi/GPRS. Certified to IEC 62109-1 and IEC 62109-2. We are an authorised Felicity Solar distributor, and the IVGM7K6LP1G1 carries a 2 Years warranty.

Specifications last updated 17 August 2026

Felicity Solar IVGM7K6LP1G1 7.6kW Single-Phase Hybrid Solar Inverter full specifications

Electrical

AC Output Voltage	220-230 V
AC Rated Output Current	33 A
AC Wiring Mode	L+N+PE
Backup Max Output Current	40 A
Backup Rated Output Power	7.6 kW
Battery Inputs	1
Battery Type	Lead-Acid, Li-Ion
Battery Voltage Range	40-60 V
Charge Algorithm	Self-Adaption to BMS
Grid Frequency Range (50 Hz)	45-55 Hz
Grid Frequency Range (60 Hz)	55-65 Hz
Grid Regulation	VDE 4105, CEI 0-21, G99, NRS 097-2-1, EN 50549-1, EN 50549-10, NC RFG (Poland), EN 50549-1/-10+Netherlands, PPDS, NTS & UNE217001 & UNE217002, UL1741 (in progress)
Ground Fault Current Monitoring	Yes
MPPT Efficiency	99.9 %
MPPT Full-Load Voltage Range	230-425 V
MPPT Trackers	2
MPPT Voltage Range	120-425 V
Max AC Output Power	8.36 kW
Max AC Pass-Through Current	50 A
Max Charge/Discharge Power	7.6 kW
Max Charging Current	190 A
Max Discharging Current	190 A
Max Efficiency	97.6 %
Max Output Current	36 A
Max PV Input Current	26+26 A
Max PV Voltage	500 V
Max Recommended PV Power	11.4 kW
Max Short-Circuit Current	44+44 A
Nominal AC Input Voltage	220-230 V
Nominal Input Frequency	50/60 Hz
Output Frequency	50/60 Hz
Output Short-Circuit Protection	Yes
Overload Protection	Yes
PV Working Voltage Range	90-500 V
Phase	Single Phase
Power Factor Adjustment Range	0.8 leading to 0.8 lagging
Protection	Output Over Current Protection, Output Over Power Protection, Output Short-Circuit Protection, Anti-islanding Protection, GFCI Protection, Arc Fault Circuit Interrupter (AFCI), Insulation Resistor Detection
Rated Apparent Output Power	7.6 kVA
Rated Output Power	7.6 kW
Rated PV Input Voltage	380 V
Start-Up Voltage	100 V
Strings per MPPT	2
Surge Rating	2*rated (10s)
Total Harmonic Distortion	<3 %
Transfer Time	10 ms

Mechanical

BMS Communication	RS485, CAN
Communication Interface	RS232, RS485
Display	LCD, LED
Gross Weight	40.5 kg
Installation Style	Wall-Mounted
Monitoring Module	WiFi/GPRS
Net Weight	33.5 kg
Package Dimensions	787 x 547 x 358 mm
Parallel Capability	6
Safety Standard	IEC 62109-1, IEC 62109-2
Topology	Isolated (transformer-based)

Environmental

Cooling	Smart Cooling
IP Rating	IP65
Operating Temperature Range	-25 to 60 (>45 derating) °C

Certifications

IEC 62109-1
IEC 62109-2

Frequently Asked Questions

11.4 kW is the maximum recommended PV power, shared across 2 MPPT trackers rated 26+26 A. The tracking window is 120-425 V from a 380 V rated PV input, the working range is 90-500 V with a 500 V maximum, start-up begins at 100 V, each MPPT carries 2 strings, and maximum short-circuit current is 44+44 A.

40-60 V is the battery voltage range, on a single battery input. Lead-Acid and Li-Ion packs are both supported and can be charged or discharged at up to 190 A and 7.6 kW, with the charge algorithm self-adapting to the BMS over RS485 or CAN.

10 ms is the transfer time. Backup rated output is 7.6 kW with a 40 A maximum backup current at 220-230 V and 50/60 Hz, total harmonic distortion stays below 3%, the surge rating is twice rated power for 10 s, and the power factor is adjustable from 0.8 leading to 0.8 lagging.

IP65 is the enclosure rating and installation is wall-mounted. The unit measures 430 x 654 x 243 mm, weighs 33.5 kg net and 40.5 kg gross, works from -25 to 60 °C with derating above 45 °C under smart cooling, is certified to IEC 62109-1 and IEC 62109-2, and carries a 2 Years warranty.