IVGM6KLP2G1 — Felicity Solar IVGM low-voltage hybrid solar inverter

Felicity Solar IVGM6KLP2G1 6kW Single-Phase Hybrid Solar Inverter

A single-phase hybrid inverter whose two trackers take 26+13 A of PV, up to 9 kW of recommended array, behind a 27.5 A output and a 33.5 kg IP65 wall box.

Rated Output Power: 6 kW
Max Efficiency: 97.6 %
Battery Voltage Range: 40-60 V
Phase: Single Phase

AED 2,750incl. VAT

In stock

Full Specifications Download datasheet (PDF)

Felicity Solar IVGM6KLP2G1 6kW Single-Phase Hybrid Solar Inverter features

27.5 A of maximum output current

the IVGM6KLP2G1 ceiling behind a 6 kW rating and a 6.6 kW maximum AC output at 220-230 V

135 A charging and 135 A discharging

up to 6 kW either way into a 40-60 V Lead-Acid or Li-Ion bank on one battery input

26+13 A of PV input across two MPPT trackers

9 kW of recommended array to 500 V, tracked from 120-425 V and started at 100 V

97.6% peak conversion efficiency

97% European efficiency, 99.9% MPPT efficiency and harmonic distortion held under 3%

A 10 ms transfer to a 6 kW backup output

with anti-islanding, GFCI and insulation-resistance detection on an L+N+PE connection

An IP65 wall box of 33.5 kg net, 40.5 kg gross

smart-cooled under 35 dB, rated -25 to 60°C and certified to IEC 62109-1 and IEC 62109-2

About the Felicity Solar IVGM6KLP2G1 6kW Single-Phase Hybrid Solar Inverter

The Felicity Solar IVGM6KLP2G1 is a single-phase hybrid solar inverter rated 6 kW, with a 6.6 kW maximum AC output, 27.5 A of maximum output current at 220-230 V, and a 40-60 V battery input it charges and discharges at up to 135 A. Its two MPPT trackers accept 26+13 A of PV input. Those trackers work across a 120-425 V window from a 380 V nominal PV input, get going at 100 V, and take up to 500 V and 9 kW of recommended array. Peak efficiency is 97.6%, European efficiency 97%, MPPT efficiency 99.9%, harmonic distortion under 3% and power factor above 0.99. Backup output is rated 6 kW and transfers in 10 ms. The isolated topology drives Lead-Acid or Li-Ion banks over RS485 and CAN, reports on LCD and LED with WiFi/GPRS monitoring, and parallels 6 units. The IP65 wall-mounted box weighs 33.5 kg net, stays under 35 dB from -25 to 60°C, and is certified to IEC 62109-1 and IEC 62109-2. We are an authorised Felicity Solar distributor; the IVGM6KLP2G1 is covered for 10 Years.

Specifications last updated 7 August 2026

Felicity Solar IVGM6KLP2G1 6kW Single-Phase Hybrid Solar Inverter full specifications

Electrical

AC Output Voltage	220-230 V
AC Rated Output Current	25 A
AC Wiring Mode	L+N+PE
Backup Rated Output Power	6 kW
Battery Inputs	1
Battery Type	Lead-Acid, Li-Ion
Battery Voltage Range	40-60 V
Charge Algorithm	Self-Adaption to BMS
European Efficiency	97 %
Grid Frequency Range (50 Hz)	45-55 Hz
Grid Frequency Range (60 Hz)	55-65 Hz
Grid Regulation	VDE 4105, CEI 0-21, G99, NRS 097-2-1, EN 50549-1, EN 50549-10, NC RFG (Poland), EN 50549-1/-10+Netherlands, PPDS, NTS & UNE217001 & UNE217002, UL1741 (in progress)
Ground Fault Current Monitoring	Yes
MPPT Efficiency	99.9 %
MPPT Full-Load Voltage Range	230-425 V
MPPT Trackers	2
MPPT Voltage Range	120-425 V
Max AC Input Current	40 A
Max AC Output Power	6.6 kW
Max AC Pass-Through Current	40 A
Max Charge/Discharge Power	6 kW
Max Charging Current	135 A
Max Discharging Current	135 A
Max Efficiency	97.6 %
Max Output Current	27.5 A
Max PV Input Current	26+13 A
Max PV Voltage	500 V
Max Recommended PV Power	9 kW
Max Short-Circuit Current	44+17 A
Nominal AC Input Voltage	220-230 V
Nominal Input Frequency	50/60 Hz
Output Frequency	50/60 Hz
Output Short-Circuit Protection	Yes
Overload Protection	Yes
PV Working Voltage Range	90-500 V
Phase	Single Phase
Power Factor	>0.99
Power Factor Adjustment Range	0.8 leading to 0.8 lagging
Protection	Output Over Current Protection, Output Over Power Protection, Output Short-Circuit Protection, Anti-islanding Protection, GFCI Protection, Insulation Resistor Detection
Rated Apparent Output Power	6 kVA
Rated Output Power	6 kW
Rated PV Input Voltage	380 V
Start-Up Voltage	100 V
Strings per MPPT	2+1
Surge Rating	2*rated (10s)
Total Harmonic Distortion	<3 %
Transfer Time	10 ms

Mechanical

BMS Communication	RS485, CAN
Communication Interface	RS232, RS485
Display	LCD, LED
Gross Weight	40.5 kg
Installation Style	Wall-Mounted
Monitoring Module	WiFi/GPRS
Net Weight	33.5 kg
Package Dimensions	787 x 547 x 358 mm
Parallel Capability	6
Safety Standard	IEC 62109-1, IEC 62109-2
Topology	Isolated (transformer-based)

Environmental

Cooling	Smart Cooling
IP Rating	IP65
Noise Level	<35 dB
Operating Altitude	2000 m
Operating Temperature Range	-25 to 60 (>45 derating) °C
Relative Humidity	0-95 (non-condensing) %

Certifications

IEC 62109-1
IEC 62109-2

Frequently Asked Questions

27.5 A. That sits behind a 6 kW rating and a 6.6 kW maximum AC output at 220-230 V, single phase, wired L+N+PE, with a power factor above 0.99 and harmonic distortion under 3%.

9 kW of recommended array. Its two MPPT trackers accept 26+13 A of PV input to 500 V, track between 120-425 V from a 380 V nominal PV input, and get going at 100 V.

135 A each way, up to 6 kW, on a 40-60 V Lead-Acid or Li-Ion bank through a single battery input, with RS485 and CAN carrying the BMS link.

10 Years. The IVGM6KLP2G1 arrives as a 33.5 kg net, 40.5 kg gross IP65 wall-mounted unit that runs under 35 dB from -25 to 60°C, certified to IEC 62109-1 and IEC 62109-2. We are an authorised Felicity Solar distributor.