IVGM7K6LP2G1 — Felicity Solar IVGM low-voltage hybrid solar inverter

Felicity Solar IVGM7K6LP2G1 7.6kW Single-Phase Hybrid Solar Inverter

Single-phase hybrid inverter carrying 7.6 kW, peaking at 8.36 kW AC, sized for up to 11.4 kW of solar across two MPPT trackers.

Rated Output Power: 7.6 kW
Max Efficiency: 97.6 %
Battery Voltage Range: 40-60 V
Phase: Single Phase

AED 3,490incl. VAT

In stock

Full Specifications Download datasheet (PDF)

Felicity Solar IVGM7K6LP2G1 7.6kW Single-Phase Hybrid Solar Inverter features

7.6 kW rated, 8.36 kW maximum AC output

the IVGM7K6LP2G1 carries 7.6 kW continuously on a 220-230 V single-phase L+N+PE connection

34.8 A maximum output current

backup output is rated 7.6 kW at 50/60 Hz, with total harmonic distortion under 3%

11.4 kW of recommended PV on two MPPT trackers

26+26 A of string current over a 120-425 V window, up to a 500 V maximum PV voltage

190 A of charge and 190 A of discharge

7.6 kW into or out of a 40-60 V lead-acid or Li-Ion bank on a single battery input

97.6% peak conversion efficiency

97% European efficiency, 99.9% MPPT tracking efficiency and a 10 ms transfer to backup

IP65 wall-mounted body at 33.5 kg net

smart cooling under 35 dB from -25 to 60 °C, certified to IEC 62109-1 and IEC 62109-2

About the Felicity Solar IVGM7K6LP2G1 7.6kW Single-Phase Hybrid Solar Inverter

The Felicity Solar IVGM7K6LP2G1 is a single-phase hybrid solar inverter rated 7.6 kW continuous, peaking at 8.36 kW of AC output and 34.8 A, charging or discharging a 40-60 V battery at up to 7.6 kW and 190 A, and accepting up to 11.4 kW of recommended PV across two MPPT trackers. Those trackers work from 120-425 V, take 26+26 A of string current and tolerate a 500 V maximum PV voltage, with harvesting starting at 100 V. Grid and backup output sit at 220-230 V on an L+N+PE connection at 50/60 Hz, with total harmonic distortion under 3% and a 10 ms transfer to backup. Peak conversion efficiency is 97.6%, European efficiency 97% and MPPT tracking efficiency 99.9%. The isolated, transformer-based design mounts on a wall, weighs 33.5 kg net, is rated IP65 and runs below 35 dB on smart cooling from -25 to 60 °C. Up to 6 units run in parallel, the BMS link is RS485 or CAN, and monitoring is WiFi/GPRS. Safety is certified to IEC 62109-1 and IEC 62109-2, and the warranty is 10 Years. We are an authorised Felicity Solar distributor and supply the IVGM7K6LP2G1 from our own stock.

Specifications last updated 7 August 2026

Felicity Solar IVGM7K6LP2G1 7.6kW Single-Phase Hybrid Solar Inverter full specifications

Electrical

AC Output Voltage	220-230 V
AC Rated Output Current	31.7 A
AC Wiring Mode	L+N+PE
Backup Rated Output Power	7.6 kW
Battery Inputs	1
Battery Type	Lead-Acid, Li-Ion
Battery Voltage Range	40-60 V
Charge Algorithm	Self-Adaption to BMS
European Efficiency	97 %
Grid Frequency Range (50 Hz)	45-55 Hz
Grid Frequency Range (60 Hz)	55-65 Hz
Grid Regulation	VDE 4105, CEI 0-21, G99, NRS 097-2-1, EN 50549-1, EN 50549-10, NC RFG (Poland), EN 50549-1/-10+Netherlands, PPDS, NTS & UNE217001 & UNE217002, UL1741 (in progress)
Ground Fault Current Monitoring	Yes
MPPT Efficiency	99.9 %
MPPT Full-Load Voltage Range	230-425 V
MPPT Trackers	2
MPPT Voltage Range	120-425 V
Max AC Output Power	8.36 kW
Max AC Pass-Through Current	50 A
Max Charge/Discharge Power	7.6 kW
Max Charging Current	190 A
Max Discharging Current	190 A
Max Efficiency	97.6 %
Max Output Current	34.8 A
Max PV Input Current	26+26 A
Max PV Voltage	500 V
Max Recommended PV Power	11.4 kW
Max Short-Circuit Current	44+44 A
Nominal AC Input Voltage	220-230 V
Nominal Input Frequency	50/60 Hz
Output Frequency	50/60 Hz
Output Short-Circuit Protection	Yes
Overload Protection	Yes
PV Working Voltage Range	90-500 V
Phase	Single Phase
Power Factor	>0.99
Power Factor Adjustment Range	0.8 leading to 0.8 lagging
Protection	Output Over Current Protection, Output Over Power Protection, Output Short-Circuit Protection, Anti-islanding Protection, GFCI Protection, Insulation Resistor Detection
Rated Apparent Output Power	7.6 kVA
Rated Output Power	7.6 kW
Rated PV Input Voltage	380 V
Start-Up Voltage	100 V
Strings per MPPT	2
Surge Rating	2*rated (10s)
Total Harmonic Distortion	<3 %
Transfer Time	10 ms

Mechanical

BMS Communication	RS485, CAN
Communication Interface	RS232, RS485
Display	LCD, LED
Gross Weight	40.5 kg
Installation Style	Wall-Mounted
Monitoring Module	WiFi/GPRS
Net Weight	33.5 kg
Package Dimensions	787 x 547 x 358 mm
Parallel Capability	6
Safety Standard	IEC 62109-1, IEC 62109-2
Topology	Isolated (transformer-based)

Environmental

Cooling	Smart Cooling
IP Rating	IP65
Noise Level	<35 dB
Operating Altitude	2000 m
Operating Temperature Range	-25 to 60 (>45 derating) °C
Relative Humidity	0-95 (non-condensing) %

Certifications

IEC 62109-1
IEC 62109-2

Frequently Asked Questions

11.4 kW is the maximum recommended PV power, spread over two MPPT trackers that accept 26+26 A of string current between 120 and 425 V, up to a 500 V maximum PV voltage. Tracking starts from 100 V.

190 A in each direction, moving up to 7.6 kW into or out of a 40-60 V lead-acid or Li-Ion bank on a single battery input. The BMS link is RS485 or CAN.

7.6 kW is the backup rated output, delivered at 220-230 V single phase through an L+N+PE connection at 50/60 Hz, with a 10 ms transfer time and total harmonic distortion under 3%.

10 Years is the warranty term, and safety is certified to IEC 62109-1 and IEC 62109-2. The IP65 enclosure is wall-mounted, weighs 33.5 kg net and stays under 35 dB on smart cooling.