IVGM29K9HP3G2 — Felicity Solar IVGM HP3G2 three-phase hybrid solar inverter

Felicity Solar IVGM29K9HP3G2 29.9kW Three-Phase Hybrid Solar Inverter

Rated 29.9 kW and 29.9 kVA, the IVGM29K9HP3G2 pairs 47.84 kW of PV input with 43.4 A of rated output current on a three-phase 3L+N+PE connection at 110-277 V.

Rated Output Power: 29.9 kW
Max Efficiency: 97.6 %
Max PV Input Power: 47.84 kW
Battery Voltage Range: 160-800 V

AED 10,950incl. VAT

In stock

Full Specifications Download datasheet (PDF)

Felicity Solar IVGM29K9HP3G2 29.9kW Three-Phase Hybrid Solar Inverter features

29.9 kW and 29.9 kVA rated output

The IVGM29K9HP3G2 stops just short of 30 kW, on a three-phase 3L+N+PE connection at 110-277 V.

47.84 kW maximum PV input power

Three MPPT trackers cover a 150-850 V window at 36+36+36 A, up to a 1000 V PV ceiling.

43.4 A rated output current per phase

Output overcurrent protection sits at 144 A, with a surge rating of 1.5*rated (10s).

160-800 V LFP battery across two inputs

Each input charges and discharges at 50+50 A, with BMS communication over RS485 and CAN.

The full 29.9 kW stays available on backup

Transfer takes 10 ms and total harmonic distortion stays below 3%.

IP65 wall-mounted body rated -40 to 60 °C

Smart cooling, 3000 m operating altitude, 87.1 kg net, and up to 12 units in parallel.

About the Felicity Solar IVGM29K9HP3G2 29.9kW Three-Phase Hybrid Solar Inverter

The Felicity Solar IVGM29K9HP3G2 is a three-phase hybrid inverter rated 29.9 kW and 29.9 kVA, a rating that stops just short of 30 kW, which accepts up to 47.84 kW of PV across three MPPT trackers and delivers 43.4 A of rated output current per phase at a maximum efficiency of 97.6%. European efficiency is 97%. The MPPT window runs 150-850 V from a 180 V start-up, with 1000 V maximum PV voltage and 36+36+36 A of input current. Two battery inputs take an LFP pack anywhere from 160 to 800 V, charging and discharging at 50+50 A, with BMS communication over RS485 and CAN. Backup output keeps the full 29.9 kW, transferring in 10 ms with THD under 3% and output overcurrent protection at 144 A. The wall-mounted IP65 body runs -40 to 60 °C on smart cooling, weighs 87.1 kg net, and parallels up to 12 units. Certified to EN 62477-1, IEC 62109-1 and IEC 62109-2. We are an authorised Felicity Solar distributor, and the IVGM29K9HP3G2 carries a 5 Years warranty.

Specifications last updated 7 August 2026

Felicity Solar IVGM29K9HP3G2 29.9kW Three-Phase Hybrid Solar Inverter full specifications

Electrical

AC Output Line Voltage	190-480 V
AC Output Voltage	110-277 V
AC Rated Output Current	43.4 A
AC Wiring Mode	3L+N+PE
Backup Rated Output Power	29.9 kW
Battery Inputs	2
Battery Type	LFP
Battery Voltage Range	160-800 V
Charge Algorithm	Self-Adaption to BMS
European Efficiency	97 %
Grid Frequency Range (50 Hz)	45-55 Hz
Grid Frequency Range (60 Hz)	55-65 Hz
Grid Regulation	NTS & UNE217001 & UNE217002, CEI 0-21, NRS 097-2-1, EN50549-1/-10+Poland Deviations, VDE 4105, G99, EN50549-1/-10, EN50549-1/-10+Netherlands Deviations
Ground Fault Current Monitoring	Yes
MPPT Efficiency	99.9 %
MPPT Full-Load Voltage Range	443-850 V
MPPT Trackers	3
MPPT Voltage Range	150-850 V
Max AC Output Power	29.9 kW
Max AC Pass-Through Current	200 A
Max Charging Current	50+50 A
Max Discharging Current	50+50 A
Max Efficiency	97.6 %
Max Output Current	43.4 A
Max Output Overcurrent Protection	144 A
Max PV Access Power	59.8 kW
Max PV Input Current	36+36+36 A
Max PV Input Power	47.84 kW
Max PV Voltage	1000 V
Max Short-Circuit Current	55+55+55 A
Min DC Input Voltage	150 V
Nominal AC Input Line Voltage	190-480 V
Nominal AC Input Voltage	110-277 V
Nominal Input Frequency	50/60 Hz
Output Frequency	50/60 Hz
Output Short-Circuit Protection	Yes
Overload Protection	Yes
Overvoltage Category (AC)	III
Overvoltage Category (DC)	II
Phase	Three Phase
Power Factor Adjustment Range	0.8 leading to 0.8 lagging
Protection	PV Input Lightning Protection, PV String Input Reverse Polarity Protection, Battery Input Lightning Protection, AC Output Lightning Protection, Battery Input Reverse Polarity Protection, Insulation Resistor Detection, Residual Current Monitoring Unit, Output Over Current Protection, Output Short-Circuit Protection, Output Over Voltage Protection, Anti-islanding Protection
Rated Apparent Output Power	29.9 kVA
Rated Output Power	29.9 kW
Rated PV Input Voltage	600 V
Start-Up Voltage	180 V
Strings per MPPT	2
Surge Protection Level (AC)	II
Surge Rating	1.5*rated (10s)
Total Harmonic Distortion	<3 %
Transfer Time	10 ms

Mechanical

BMS Communication	RS485, CAN
Communication Interface	RS232, RS485
Display	LCD Touch Screen
Gross Weight	107.1 kg
Installation Style	Wall-Mounted
Monitoring Module	WiFi/GPRS
Net Weight	87.1 kg
Package Dimensions	1114 x 774 x 469 mm
Parallel Capability	12
Safety Standard	EN 62477-1, IEC 62109-1, IEC 62109-2
Topology	Non-Isolated

Environmental

Cooling	Smart Cooling
IP Rating	IP65
Operating Altitude	3000 (>2000 derating) m
Operating Temperature Range	-40 to 60 (>50 derating) °C
Relative Humidity	0-95 (non-condensing) %

Certifications

EN 62477-1
IEC 62109-1
IEC 62109-2

Frequently Asked Questions

47.84 kW is the maximum PV input power of the IVGM29K9HP3G2, tracked by 3 MPPTs over a 150-850 V window at 36+36+36 A, from a 180 V start-up and up to a 1000 V maximum PV voltage.

29.9 kW is the rated output power, and 29.9 kVA the rated apparent power, so this model sits just below 30 kW rather than at it. Backup output holds the same 29.9 kW.

160-800 V is the battery voltage range, LFP chemistry, on two battery inputs that charge and discharge at 50+50 A, with BMS communication over RS485 and CAN.

IP65 is the enclosure rating, wall-mounted, with smart cooling and a -40 to 60 °C operating range that derates above 50 °C, up to 3000 m. We are an authorised Felicity Solar distributor and it carries a 5 Years warranty.