Felicity Solar IVGM80KHP3G1 Hybrid Inverter

InvertersModel IVGM80KHP3G1

Felicity Solar IVGM80KHP3G1 80kW Three-Phase Hybrid Solar Inverter

Carrying 160kW of array on 8 MPPT trackers, the IVGM80KHP3G1 puts out 80kW continuously, 88kVA at its apparent-power ceiling, and 127.5A of current.

  • Rated Output Power: 80 kW
  • Max Apparent Power: 88 kVA
  • Max Efficiency: 97.6 %
  • Max PV Input Power: 160 kW

Models in the IVGM25KHP3G2 – IVGM125KHP3G1 family

What sets the IVGM80KHP3G1 apart from the other 8 models in the family: AC Output Line Voltage 380-400 V; AC Output Voltage 220-230 V; AC Rated Output Current 116 A; Backup Rated Output Power 80 kW; Battery Voltage Range 160-1000 V; Grid Regulation IEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE-Richtlinie R25, G99, VDE-AR-N 4110; MPPT Full-Load Voltage Range 444-850 V; MPPT Trackers 8.

AED 1incl. VAT

In stock

  • Delivered within 3 business days, door to door, to every market we serve.
  • Dispatched the same business day for an order placed before 21:00 (Dubai time), or the next business day after.
  • Delivery charge: AED 1,000
  • 2-year warranty
Full SpecificationsDownload datasheet (PDF)

Felicity Solar IVGM80KHP3G1 80kW Three-Phase Hybrid Solar Inverter features

  • 160kW of PV input across 8 MPPT trackers

    two strings and 45A per tracker at up to 1000V, tracked from 150V to 850V and 444-850V at full load

  • 80kW of rated three-phase output, 88kVA at maximum apparent power

    80kVA is its apparent rating, and the IVGM80KHP3G1 takes 1.5 times its rated power for 10s

  • 127.5A of maximum output current against 116A rated

    output overcurrent protection is set at 218A and 270A can transit the AC pass-through

  • A 160-1000V LFP battery range on two inputs

    charge and discharge each reach 120+120A, and transfer to the 80kW backup output takes 0ms

  • IP66 build tolerating 0-100% non-condensing humidity

    156kg net and 200kg gross, 1271 mm wide by 814.5 mm high and 379.5 mm deep, wall-mounted up to 4000m

  • A 2 Years warranty on an inverter that parallels to 12 units

    the IVGM80KHP3G1 reports over RS232 and RS485, shows status on LCD and LED, and monitors on WiFi, Bluetooth, 4G or LAN

About the Felicity Solar IVGM80KHP3G1 80kW Three-Phase Hybrid Solar Inverter

The Felicity Solar IVGM80KHP3G1 accepts 160kW of PV across 8 MPPT trackers and turns it into 80kW of three-phase output, 80kVA rated apparent and 88kVA at maximum, alongside 127.5A of output current, 97.6% peak efficiency, a 160-1000V battery window and a warranty of 2 Years. Every tracker holds two strings at 45A, tolerates 1000V of PV, and works from a 180V start-up across 150-850V, tightening to 444-850V when the unit runs at full load; rated PV input voltage is 600V. The output is 3L+N+PE, at 380-400V of line voltage and 220-230V per phase, rated 116A, protected at 218A, with 270A available through the AC pass-through. Two inputs move 120+120A into and out of LFP packs, the charge algorithm following the BMS on RS485 and CAN; transfer to the 80kW backup output takes 0ms and surge capacity is 1.5 times rated power for 10s. The wall-mounted, Non-Isolated IP66 cabinet is smart-cooled, stands 814.5 mm tall by 1271 mm wide and 379.5 mm deep, and carries 156kg net. We are an authorised Felicity Solar distributor and supply the IVGM80KHP3G1 from our own stock.

Specifications last updated 17 August 2026

Felicity Solar IVGM80KHP3G1 80kW Three-Phase Hybrid Solar Inverter full specifications

Electrical(49)

AC Output Line Voltage380-400 V
AC Output Voltage220-230 V
AC Rated Output Current116 A
AC Wiring Mode3L+N+PE
Backup Rated Output Power80 kW
Battery Inputs2
Battery TypeLFP
Battery Voltage Range160-1000 V
Charge AlgorithmSelf-Adaption to BMS
Grid Frequency Range (50 Hz)45-55 Hz
Grid Frequency Range (60 Hz)55-65 Hz
Grid RegulationIEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE-Richtlinie R25, G99, VDE-AR-N 4110
Ground Fault Current MonitoringYes
Input Voltage Range184-264.5 V
MPPT Full-Load Voltage Range444-850 V
MPPT Trackers8
MPPT Voltage Range150-850 V
Max AC Input Current127.5 A
Max AC Pass-Through Current270 A
Max Apparent Power88 kVA
Max Charging Current120+120 A
Max Discharging Current120+120 A
Max Efficiency97.6 %
Max Output Current127.5 A
Max Output Overcurrent Protection218 A
Max PV Input Current45+45+45+45+45+45+45+45 A
Max PV Input Power160 kW
Max PV Voltage1000 V
Max Short-Circuit Current68+68+68+68+68+68+68+68 A
Nominal AC Input Line Voltage380-400 V
Nominal AC Input Voltage220-230 V
Nominal Input Frequency50/60 Hz
Output Frequency50/60 Hz
Output Short-Circuit ProtectionYes
Overload ProtectionYes
Overvoltage Category (AC)III
Overvoltage Category (DC)II
PhaseThree Phase
Power Factor Adjustment Range0.8 leading to 0.8 lagging
ProtectionPV Input Lightning Protection, PV String Input Reverse Polarity Protection, Battery Input Lightning Protection, Battery Input Reverse Polarity Protection, DC Component Detection, Insulation Resistor Detection, Residual Current Monitoring Unit, Arc Fault Monitoring (optional), Output Over Current Protection, Output Shorted Protection, Output Over Voltage Protection, Remaining Current (RCD) Monitoring, Overheat Protection, Anti-islanding Protection, AC Output Lightning Protection
Rated Apparent Output Power80 kVA
Rated Output Power80 kW
Rated PV Input Voltage600 V
Start-Up Voltage180 V
Strings per MPPT2
Surge Protection Level (AC)III
Surge Rating1.5*rated (10s)
Total Harmonic Distortion<3 %
Transfer Time0 ms

Mechanical(11)

BMS CommunicationRS485, CAN
Communication InterfaceRS232, RS485
DisplayLCD, LED
Gross Weight200 kg
Installation StyleWall-Mounted
Monitoring ModuleWiFi/Bluetooth/4G/LAN
Net Weight156 kg
Package Dimensions1410 x 960 x 646 mm
Parallel Capability12
Safety StandardIEC/EN 62109-1, IEC/EN 62109-2
TopologyNon-Isolated

Environmental(5)

CoolingSmart Cooling
IP RatingIP66
Operating Altitude4000 m
Operating Temperature Range-40 to 60 (>45 derating) °C
Relative Humidity0-100 (non-condensing) %

Certifications(4)

  • IEC 62109-1
  • EN 62109-1
  • IEC 62109-2
  • EN 62109-2

Downloads & support

PDFThe manufacturer's sheet, to print or share

Frequently Asked Questions

What is the maximum PV input of the IVGM80KHP3G1?

160kW of maximum PV input power, divided over 8 MPPT trackers that each carry two strings at 45A and up to 1000V. The full-load tracking window is 444-850V inside a wider 150-850V range, opening at a 180V start-up, at a 600V rated PV input voltage.

How much output current does the IVGM80KHP3G1 supply?

127.5A of maximum output current against 116A rated, behind 218A of output overcurrent protection and with 270A of AC pass-through. Output power is 80kW and 80kVA rated, 88kVA at maximum apparent power, under 380-400V of line voltage and 220-230V per phase.

Can several IVGM80KHP3G1 units run together, and how are they monitored?

12 units can be paralleled. Monitoring runs over WiFi, Bluetooth, 4G or LAN, with RS232 and RS485 interfaces, an LCD and LED display, and BMS links on RS485 and CAN. The IP66 cabinet works from -40 to 60°C, derating past 45°C, and to 4000m of altitude.

What warranty and safety approvals come with the IVGM80KHP3G1?

2 Years of warranty. Approvals are IEC 62109-1, EN 62109-1, IEC 62109-2 and EN 62109-2 for safety, plus the grid codes IEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE-Richtlinie R25, G99 and VDE-AR-N 4110.

Customer reviews