Felicity Solar IVGM50KHP3G2

InvertersModel IVGM50KHP3G2

Felicity Solar IVGM50KHP3G2 50kW Three-Phase Hybrid Solar Inverter

A 50 kW three-phase hybrid inverter for commercial and industrial sites, with 55 kW maximum AC output, four MPPT trackers taking 80 kW of PV, and a 160-800 V LFP battery window. Up to 12 units run in parallel.

  • Rated Output Power: 50 kW
  • Max Efficiency: 97.6 %
  • Max PV Input Power: 80 kW
  • Battery Voltage Range: 160-800 V

Models in the IVGM25KHP3G2 – IVGM125KHP3G1 family

What sets the IVGM50KHP3G2 apart from the other 8 models in the family: AC Output Line Voltage 190-480 V; AC Output Voltage 110-277 V; AC Rated Output Current 72.5 A; Backup Rated Output Power 50 kW; Battery Voltage Range 160-800 V; Grid Regulation NTS & UNE217001 & UNE217002, CEI 0-21, NRS 097-2-1, EN50549-1/-10+Poland Deviations, VDE 4105, G99, EN50549-1/-10, EN50549-1/-10+Netherlands Deviations; MPPT Full-Load Voltage Range 550-850 V; MPPT Trackers 4.

AED 18,350incl. VAT

In stock

  • Delivered within 3 business days, door to door, to every market we serve.
  • Dispatched the same business day for an order placed before 21:00 (Dubai time), or the next business day after.
  • Delivery charge: free
  • 2-year warranty
Full SpecificationsDownload datasheet (PDF)

Felicity Solar IVGM50KHP3G2 50kW Three-Phase Hybrid Solar Inverter features

  • 50 kW rated three-phase output, 55 kW maximum AC power, 72.5 A rated and 79.7 A maximum output current on a 3L+N+PE connection

  • Four MPPT trackers with two strings each: 80 kW maximum PV input power, 1000 V maximum PV voltage, 36 A per tracker

  • 97.6% maximum efficiency, 97% European efficiency and 99.9% MPPT tracking efficiency, with total harmonic distortion under 3%

  • Two LFP battery inputs across a 160-800 V high-voltage range, charging and discharging at 50+50 A with the BMS self-adapting over RS485 or CAN

  • Up to 12 units in parallel and 200 A maximum AC pass-through current, with a 10 ms transfer time and 1.5x rated surge for 10 s

  • IP65 wall-mounted enclosure with smart cooling, -40 to +60 C operation (derating above 50 C) and a 3000 m altitude rating

About the Felicity Solar IVGM50KHP3G2 50kW Three-Phase Hybrid Solar Inverter

The Felicity Solar IVGM50KHP3G2 is a 50 kW three-phase hybrid solar inverter built for commercial and industrial installations. It delivers 50 kW rated output and 55 kW maximum AC power on a 3L+N+PE connection at 190-480 V line voltage, accepts up to 80 kW of PV across four MPPT trackers, and peaks at 97.6% efficiency. Each of the four trackers carries two strings and 36 A, rated to 1000 V, so a large roof or ground array can be split across orientations and shading groups without extra combiner hardware. Two battery ports connect LFP packs over a high-voltage 160-800 V window and charge or discharge at 50+50 A, with the pack's own BMS setting the charge profile over RS485 or CAN. For plants beyond one unit, up to 12 inverters run in parallel, and 200 A of AC pass-through current backs the loads behind them. The IP65 wall-mounted enclosure, smart cooling, -40 to +60 C range and 3000 m altitude rating suit outdoor plant rooms. Supplied by an authorised Felicity Solar distributor.

Specifications last updated 23 March 2026

Felicity Solar IVGM50KHP3G2 50kW Three-Phase Hybrid Solar Inverter full specifications

Electrical(50)

AC Output Line Voltage190-480 V
AC Output Voltage110-277 V
AC Rated Output Current72.5 A
AC Wiring Mode3L+N+PE
Backup Rated Output Power50 kW
Battery Inputs2
Battery TypeLFP
Battery Voltage Range160-800 V
Charge AlgorithmSelf-Adaption to BMS
European Efficiency97 %
Grid Frequency Range (50 Hz)45-55 Hz
Grid Frequency Range (60 Hz)55-65 Hz
Grid RegulationNTS & UNE217001 & UNE217002, CEI 0-21, NRS 097-2-1, EN50549-1/-10+Poland Deviations, VDE 4105, G99, EN50549-1/-10, EN50549-1/-10+Netherlands Deviations
Ground Fault Current MonitoringYes
MPPT Efficiency99.9 %
MPPT Full-Load Voltage Range550-850 V
MPPT Trackers4
MPPT Voltage Range150-850 V
Max AC Output Power55 kW
Max AC Pass-Through Current200 A
Max Charging Current50+50 A
Max Discharging Current50+50 A
Max Efficiency97.6 %
Max Output Current79.7 A
Max PV Access Power100 kW
Max PV Input Current36+36+36+36 A
Max PV Input Power80 kW
Max PV Voltage1000 V
Max Short-Circuit Current55+55+55+55 A
Min DC Input Voltage150 V
Nominal AC Input Line Voltage190-480 V
Nominal AC Input Voltage110-277 V
Nominal Input Frequency50/60 Hz
Output Frequency50/60 Hz
Output Short-Circuit ProtectionYes
Overload ProtectionYes
Overvoltage Category (AC)III
Overvoltage Category (DC)II
PhaseThree Phase
Power Factor Adjustment Range0.8 leading to 0.8 lagging
ProtectionPV Input Lightning Protection, PV String Input Reverse Polarity Protection, Battery Input Lightning Protection, AC Output Lightning Protection, Battery Input Reverse Polarity Protection, Insulation Resistor Detection, Residual Current Monitoring Unit, Output Over Current Protection, Output Short-Circuit Protection, Output Over Voltage Protection, Anti-islanding Protection
Rated Apparent Output Power50 kVA
Rated Output Power50 kW
Rated PV Input Voltage600 V
Start-Up Voltage180 V
Strings per MPPT2
Surge Protection Level (AC)II
Surge Rating1.5*rated (10s)
Total Harmonic Distortion<3 %
Transfer Time10 ms

Mechanical(11)

BMS CommunicationRS485, CAN
Communication InterfaceRS232, RS485
DisplayLCD Touch Screen
Gross Weight107.1 kg
Installation StyleWall-Mounted
Monitoring ModuleWiFi/GPRS
Net Weight87.1 kg
Package Dimensions1114 x 774 x 469 mm
Parallel Capability12
Safety StandardEN 62477-1, IEC 62109-1, IEC 62109-2
TopologyNon-Isolated

Environmental(5)

CoolingSmart Cooling
IP RatingIP65
Operating Altitude3000 (>2000 derating) m
Operating Temperature Range-40 to 60 (>50 derating) °C
Relative Humidity0-95 (non-condensing) %

Certifications(3)

  • EN 62477-1
  • IEC 62109-1
  • IEC 62109-2

Downloads & support

PDFThe manufacturer's sheet, to print or share

Frequently Asked Questions

What are the output ratings of the Felicity IVGM50KHP3G2?

It is a 50 kW three-phase inverter: 50 kW rated output power and 50 kVA rated apparent power, with 55 kW maximum AC output. Rated output current is 72.5 A and maximum output current 79.7 A, on a 3L+N+PE connection at 110-277 V phase voltage (190-480 V line) and 50/60 Hz. Power factor is adjustable from 0.8 leading to 0.8 lagging.

How much solar can the IVGM50KHP3G2 take, and across how many strings?

Maximum PV input power is 80 kW, with maximum PV access power of 100 kW. It has four MPPT trackers carrying two strings each, at 36 A per tracker and 1000 V maximum PV voltage. The MPPT range is 150-850 V, with a full-load window of 550-850 V, a 600 V rated PV input voltage and a 180 V start-up voltage.

Which batteries does the IVGM50KHP3G2 work with?

It has two battery inputs for LFP packs over a 160-800 V high-voltage range, charging and discharging at 50+50 A. The charge algorithm self-adapts to the battery BMS, which communicates over RS485 or CAN, so the pack sets its own charge profile rather than a fixed curve on the inverter.

Can several IVGM50KHP3G2 units be combined on one commercial site?

Yes. Up to 12 units run in parallel, and each unit passes through up to 200 A of AC current. The inverter supports grid codes including VDE 4105, G99, CEI 0-21, NRS 097-2-1 and EN 50549-1/-10, and is built to EN 62477-1, IEC 62109-1 and IEC 62109-2, with anti-islanding, residual current monitoring and insulation resistance detection.

Customer reviews