InvertersModel IVGM125KHP3G1
Ten MPPT trackers feed the IVGM125KHP3G1 with 250 kW of array, which it turns into 125 kW of three-phase output, 137 kVA at its apparent-power ceiling and 198.6 A of current, drawn against a 160-950 V LFP bank on two inputs.
What sets the IVGM125KHP3G1 apart from the other 8 models in the family: AC Output Line Voltage 380-400 V; AC Output Voltage 220-230 V; AC Rated Output Current 181.2 A; Backup Rated Output Power 125 kW; Battery Voltage Range 160-950 V; Grid Regulation IEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE-Richtlinie R25, G99, VDE-AR-N 4110; MPPT Full-Load Voltage Range 555-950 V; MPPT Trackers 10.
In stock
Rated output power is 125 kW and rated apparent output power 125 kVA, rising to 137 kVA at maximum, with a 125 kW backup output that transfers in 0 ms and surge capacity of 1.5 times rated power for 10 seconds.
Maximum PV input power is 250 kW over 10 MPPT trackers carrying two strings each, 45 A of input current and 68 A of short-circuit current per tracker, up to a 1000 V maximum PV voltage, tracking 150-950 V from a 180 V start-up and 555-950 V at full load.
Two battery inputs charge and discharge LFP packs at 120+120 A anywhere between 160 V and 950 V, with a charge algorithm that self-adapts to the BMS over RS485 and CAN.
AC wiring is 3L+N+PE at 380-400 V line to line and 220-230 V per phase, rated 181.2 A, maximum 198.6 A in and out, protected at 270 A with 270 A of pass-through, THD below 3% and a power factor adjustable from 0.8 leading to 0.8 lagging.
Maximum efficiency is 97.6%; the non-isolated design carries overvoltage category III on the AC side and II on the DC side, surge protection level III on both, ground fault current monitoring, and certification to IEC 62109-1, EN 62109-1, IEC 62109-2 and EN 62109-2.
The smart-cooled, wall-mounted IP66 cabinet measures 1271 x 810 x 364 mm and weighs 155.5 kg net and 198 kg gross in a 1410 x 960 x 646 mm carton, works from -40 to 60 °C with derating above 45 °C, to 4000 m and 0-100% non-condensing humidity, and parallels up to 12 units. Warranty: 2 Years.
The Felicity Solar IVGM125KHP3G1 is a three-phase hybrid solar inverter rated 125 kW and 125 kVA, with 137 kVA of maximum apparent power, 250 kW of PV input spread over 10 MPPT trackers, a 160-950 V battery window, 97.6% maximum efficiency and a 2 Years warranty. Every tracker carries two strings at 45 A and 68 A of short-circuit current, tolerates 1000 V, and tracks from 150 V after a 180 V start-up, tightening to 555-950 V at full load around a 600 V rated PV input voltage. AC wiring is 3L+N+PE, 380-400 V line to line and 220-230 V per phase, rated 181.2 A, drawing and delivering up to 198.6 A behind 270 A of output overcurrent protection and 270 A of pass-through, with harmonic distortion under 3%. Two inputs charge and discharge LFP packs at 120+120 A, the 125 kW backup output picks up in 0 ms, and surge capacity is 1.5 times rated power for 10 seconds. The smart-cooled IP66 cabinet measures 1271 x 810 x 364 mm, weighs 155.5 kg net, works to 4000 m and parallels to 12 units. We are an authorised Felicity Solar distributor and supply the IVGM125KHP3G1 from our own stock.
Specifications last updated 17 August 2026
| AC Output Line Voltage | 380-400 V |
|---|---|
| AC Output Voltage | 220-230 V |
| AC Rated Output Current | 181.2 A |
| AC Wiring Mode | 3L+N+PE |
| Backup Rated Output Power | 125 kW |
| Battery Inputs | 2 |
| Battery Type | LFP |
| Battery Voltage Range | 160-950 V |
| Charge Algorithm | Self-Adaption to BMS |
| Grid Frequency Range (50 Hz) | 45-55 Hz |
| Grid Frequency Range (60 Hz) | 55-65 Hz |
| Grid Regulation | IEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE-Richtlinie R25, G99, VDE-AR-N 4110 |
| Ground Fault Current Monitoring | Yes |
| Input Voltage Range | 184-264.5 V |
| MPPT Full-Load Voltage Range | 555-950 V |
| MPPT Trackers | 10 |
| MPPT Voltage Range | 150-950 V |
| Max AC Input Current | 198.6 A |
| Max AC Pass-Through Current | 270 A |
| Max Apparent Power | 137 kVA |
| Max Charging Current | 120+120 A |
| Max Discharging Current | 120+120 A |
| Max Efficiency | 97.6 % |
| Max Output Current | 198.6 A |
| Max Output Overcurrent Protection | 270 A |
| Max PV Input Current | 45+45+45+45+45+45+45+45+45+45 A |
|---|---|
| Max PV Input Power | 250 kW |
| Max PV Voltage | 1000 V |
| Max Short-Circuit Current | 68+68+68+68+68+68+68+68+68+68 A |
| Nominal AC Input Line Voltage | 380-400 V |
| Nominal AC Input Voltage | 220-230 V |
| Nominal Input Frequency | 50/60 Hz |
| Output Frequency | 50/60 Hz |
| Output Short-Circuit Protection | Yes |
| Overload Protection | Yes |
| Overvoltage Category (AC) | III |
| Overvoltage Category (DC) | II |
| Phase | Three Phase |
| Power Factor Adjustment Range | 0.8 leading to 0.8 lagging |
| Protection | PV Input Lightning Protection, PV String Input Reverse Polarity Protection, Battery Input Lightning Protection, Battery Input Reverse Polarity Protection, DC Component Detection, Insulation Resistor Detection, Residual Current Monitoring Unit, Arc Fault Monitoring (optional), Output Over Current Protection, Output Shorted Protection, Output Over Voltage Protection, Remaining Current (RCD) Monitoring, Overheat Protection, Anti-islanding Protection, AC Output Lightning Protection |
| Rated Apparent Output Power | 125 kVA |
| Rated Output Power | 125 kW |
| Rated PV Input Voltage | 600 V |
| Start-Up Voltage | 180 V |
| Strings per MPPT | 2 |
| Surge Protection Level (AC) | III |
| Surge Rating | 1.5*rated (10s) |
| Total Harmonic Distortion | <3 % |
| Transfer Time | 0 ms |
| BMS Communication | RS485, CAN |
|---|---|
| Communication Interface | RS232, RS485 |
| Display | LCD, LED |
| Gross Weight | 198 kg |
| Installation Style | Wall-Mounted |
| Monitoring Module | WiFi/Bluetooth/4G/LAN (optional) |
| Net Weight | 155.5 kg |
|---|---|
| Package Dimensions | 1410 x 960 x 646 mm |
| Parallel Capability | 12 |
| Safety Standard | IEC/EN 62109-1, IEC/EN 62109-2 |
| Topology | Non-Isolated |
| Cooling | Smart Cooling |
|---|---|
| IP Rating | IP66 |
| Operating Altitude | 4000 m |
| Operating Temperature Range | -40 to 60 (>45 derating) °C |
| Relative Humidity | 0-100 (non-condensing) % |
250 kW is the maximum PV input power, spread over 10 MPPT trackers with two strings each. Every tracker takes 45 A of input current and 68 A of short-circuit current, tracks from 150 V to 950 V after a 180 V start-up and narrows to 555-950 V at full load, around a 600 V rated PV input voltage and a 1000 V maximum PV voltage.
LFP packs between 160 V and 950 V, on two battery inputs that charge and discharge at 120+120 A. The charge algorithm self-adapts to the BMS over RS485 and CAN, and the 125 kW backup output takes over in 0 ms.
125 kW rated output power and 125 kVA rated apparent output power, three phase, rising to 137 kVA at maximum. Rated output current is 181.2 A and both maximum AC input current and maximum output current are 198.6 A, behind 270 A of output overcurrent protection and 270 A of pass-through, at 380-400 V line to line and 220-230 V per phase on 3L+N+PE wiring, 50/60 Hz across 45-55 Hz and 55-65 Hz windows, with THD under 3%. Grid settings cover IEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE-Richtlinie R25, G99 and VDE-AR-N 4110.
The IP66 wall-mounted cabinet runs from -40 to 60 °C with derating above 45 °C, to 4000 m of altitude and 0-100% non-condensing humidity. It measures 1271 x 810 x 364 mm, weighs 155.5 kg net and 198 kg gross, is monitored by optional WiFi, Bluetooth, 4G or LAN behind an LCD and LED panel, parallels to 12 units, and carries a 2 Years warranty.
Twenty-five Felicity inverters are IP21 and every SCCM charge controller says indoor wall-mount. IP20, IP21 and IP31 are indoor ratings, and the first digit - the dust one - is the half nobody reads. Here is which listing carries which.
Read: Can I Install a Solar Inverter Outside? What IP21, IP31 and IP65 Really Mean →An off-grid house is sized by surge, battery energy and charge current - and the surge row is the one that starts your fridge and your pump. Here are the published figures across the Felicity inverters and batteries, with the arithmetic to use them.
Read: How to Run a Whole House on Solar in Khartoum →Sana'a sits above 2,000 metres, and an inverter whose datasheet permits 2,000 m is not rated for the city at all. Here is the altitude row on 44 Felicity listings, model by model, and which ones cover your elevation.
Read: Which Solar Inverters Actually Work in Sana'a? →