
InvertersModel IVPS5048
Felicity Solar IVPS5048 4kW Single-Phase Inverter / Charger
A 48 V off-grid inverter-charger rated 4 kW real and 5 kVA apparent, with a 50 A charger and a pure sine wave 220 V output at 50/60 Hz.
- Rated Output Power: 4 kW
- Max Efficiency: 90 %
- Battery Voltage Range: 42-63 V
- Phase: Single Phase
In stock
- Delivered within 3 business days, door to door, to every market we serve.
- Dispatched the same business day for an order placed before 21:00 (Dubai time), or the next business day after.
- Delivery charge: AED 165
- 2-year warranty
Felicity Solar IVPS5048 4kW Single-Phase Inverter / Charger features
48 V nominal battery input, operating across 42-63 V with start-up at 46 V
50 A maximum charging current on a three-stage algorithm: 57.6 V bulk, 54.4 V float
Low-frequency design surges to twice rated power for 5 seconds and is motor-start capable
Wide AC input: 90-280 V in appliance mode, 170-280 V in UPS mode, 63 A pass-through
Up to 6 units in parallel; IP21 enclosure, 494 x 420 x 195 mm, 29.1 kg net
About the Felicity Solar IVPS5048 4kW Single-Phase Inverter / Charger
The Felicity Solar IVPS5048 is a single-phase off-grid inverter-charger rated 4 kW of real power and 5 kVA apparent, built around a 48 V battery bank. It delivers a pure sine wave 220 V output at 50/60 Hz and recharges at up to 50 A from the grid or a generator. A low-frequency, transformer-based design carries twice its rated power for 5 seconds and is motor-start capable, so pumps, compressors and workshop tools start without nuisance tripping. The AC input accepts 90-280 V in appliance mode and 170-280 V in UPS mode, with pass-through up to 63 A; pass-through is not available without a battery connected. The charger handles AGM, flooded, lithium-ion and self-defined profiles on a three-stage boost CC, boost CV and float algorithm, bulk at 57.6 V and float at 54.4 V, with RS485 BMS communication, an RS232 port and an LCD with LED indicators. Maximum efficiency is 90% and line-mode efficiency exceeds 95%, and up to 6 units can run in parallel. The IP21 unit measures 494 x 420 x 195 mm, weighs 29.1 kg net and operates from 0 to 40 degrees C. We are an authorised Felicity Solar distributor and supply the IVPS5048 from our own stock.
Specifications last updated 23 March 2026
Felicity Solar IVPS5048 4kW Single-Phase Inverter / Charger full specifications
Electrical(55)
| AC Output Voltage | 220 V |
|---|---|
| AC Wiring Mode | L+N+PE |
| Backup Rated Output Power | 4 kW |
| Battery Inputs | 1 |
| Battery Type | AGM, Flooded, Li-Ion, Self-Defined |
| Battery Voltage Range | 42-63 V |
| Bulk Charging Voltage | 57.6 V |
| Charge Algorithm | Three-Stage: Boost CC, Boost CV, Float |
| Float Charging Voltage | 54.4 V |
| High DC Input Recovery Voltage | 62 V |
| High Frequency Disconnect | 65 Hz |
| High Frequency Reconnect | 63 Hz |
| High Line Disconnect Voltage | 280 V |
| High Line Reconnect Voltage | 270 V |
| Input Voltage Range | 90-280 V |
| Input Voltage Range (UPS Mode) | 170-280 V |
| Input Voltage Waveform | Sinusoidal (utility or generator) |
| Line Mode Efficiency | >95 % |
| Line Mode Output Waveform | Same As Input Waveform |
| Low DC Shutdown (<50% Load) | 43 V |
| Low DC Shutdown (>50% Load) | 42 V |
| Low Frequency Disconnect | 40 Hz |
| Low Frequency Reconnect | 42 Hz |
| Low Line Disconnect (Appliance Mode) | 90 V |
| Low Line Disconnect (UPS Mode) | 170 V |
| Low Line Reconnect (Appliance Mode) | 100 V |
| Low Line Reconnect (UPS Mode) | 180 V |
| Low-Battery Recovery (<50% Load) | 47 V |
| Low-Battery Recovery (>50% Load) | 46 V |
|---|---|
| Max AC Charge Current | 50 A |
| Max AC Input Voltage | 280 V |
| Max AC Pass-Through Current | 63 A |
| Max Charging Current | 50 A |
| Max Charging Voltage | 61.0 V |
| Max Efficiency | 90 % |
| Motor Start Capable | Yes |
| Nominal AC Input Voltage | 220 V |
| Nominal DC Input Voltage | 48 V |
| Nominal Input Frequency | 50/60 Hz |
| Output Frequency | 50/60 Hz |
| Output Short-Circuit Protection | Yes |
| Output Voltage Regulation | 5 % |
| Output Voltage Waveform | Pure Sine Wave |
| Overload Protection | Air Switch Protection |
| Overload Trip Time (>105% Load) | 10 s |
| Overload Trip Time (>150% Load) | 5 s |
| Pass-Through Without Battery | No |
| Phase | Single Phase |
| Protection | Over Charge Protection, Over Discharge Protection, Overload Protection, Output Short Circuit Protection, Over Temperature Protection |
| Rated Apparent Output Power | 5 kVA |
| Rated Output Power | 4 kW |
| Short-Circuit Protection (Line Mode) | Air Switch Protection |
| Start-Up Voltage | 46 V |
| Surge Rating | 2*rated (5s) |
| Transfer Time | 15 ms |
Mechanical(8)
| BMS Communication | RS485 |
|---|---|
| Communication Interface | RS232 |
| Display | LCD, LED |
| Gross Weight | 32.5 kg |
| Net Weight | 29.1 kg |
| Package Dimensions | 607 x 540 x 290 mm |
| Parallel Capability | 6 |
| Topology | Low-Frequency (transformer-based) |
Environmental(4)
| Cooling | Intelligent Air Cooling |
|---|---|
| IP Rating | IP21 |
| Operating Temperature Range | 0-40 °C |
| Storage Temperature | -15 to 60 °C |
Downloads & support
Troubleshooting & error codes
Looking up an error code on this FelicityESS IVPS/IVPM Series? Browse the full list of codes for this device, with the cause and recommended fix for each.
View error codes for this device →Frequently Asked Questions
What is the rated output of the Felicity Solar IVPS5048?
It is rated 4 kW of real power and 5 kVA apparent power, single phase, with a pure sine wave 220 V output at 50/60 Hz. The low-frequency design also carries twice its rated power for 5 seconds and is motor-start capable.
What battery bank does the IVPS5048 need?
A 48 V nominal bank. It works across 42-63 V, starts up at 46 V and shuts down at 43 V below half load or 42 V above it. It charges AGM, flooded, lithium-ion and self-defined batteries at up to 50 A, with RS485 BMS communication.
Can the IVPS5048 run from a generator?
Yes. It accepts a sinusoidal utility or generator input at 90-280 V in appliance mode, or 170-280 V in UPS mode, and passes through up to 63 A. A battery must be connected, because the unit does not pass power through without one.
How big is the IVPS5048 and can units be paralleled?
The unit measures 494 x 420 x 195 mm and weighs 29.1 kg net, 32.5 kg gross in a 607 x 540 x 290 mm carton. It is IP21 rated with intelligent air cooling for 0 to 40 degrees C, and up to 6 units can be connected in parallel.


