Felicity Solar IVCM2012P1G2

InvertersModel IVCM2012P1G2

Felicity Solar IVCM2012P1G2 2kW Single-Phase Off-Grid Solar Inverter

A single-phase 2 kVA / 2 kW inverter-charger built around a 12 V bank: 0.8 kW of PV inside a 30-90 V MPPT window, 120 A of charge current and 165 A of maximum discharge, in a 6.5 kg wall-mounted body.

  • Rated Output Power: 2 kW
  • Max Efficiency: 90 %
  • Max PV Input Power: 0.8 kW
  • Battery Voltage Range: 10.5-15.75 V

Choose the Backup Rated Output Power

What sets the IVCM2012P1G2 apart from the other model in the family: Backup Rated Output Power 2 kW; Battery Voltage Range 10.5-15.75 V; Bulk Charging Voltage 14.1 V; Float Charging Voltage 13.5 V; High DC Input Recovery Voltage 14.5 V; Low DC Shutdown (<50% Load) 10.2 V; Low DC Shutdown (>50% Load) 9.6 V; Low-Battery Recovery (<50% Load) 11.2 V.

AED 1,600incl. VAT

In stock

  • Delivered within 3 business days, door to door, to every market we serve.
  • Dispatched the same business day for an order placed before 21:00 (Dubai time), or the next business day after.
  • Delivery charge: AED 45
  • 2-year warranty
Full SpecificationsDownload datasheet (PDF)

Felicity Solar IVCM2012P1G2 2kW Single-Phase Off-Grid Solar Inverter features

  • Rated 2 kVA / 2 kW at 230 V single phase, with 2 kW also held as backup rated output power

  • 0.8 kW of PV input under a 105 V maximum, tracked by one MPPT across a 30-90 V window at 99% efficiency

  • 12 V nominal battery bank worked from 10.5 V to 15.75 V, boosted at 14.1 V, floated at 13.5 V and capped at 15 V

  • Up to 120 A of charge current from AC or solar, 165 A of maximum discharge current and 15 A maximum inverter/rectifier current

  • 90-280 V AC input at 50/60 Hz on L+N+PE wiring, 90 V low-line disconnect and a 20 ms transfer time

  • 6.5 kg net and 8.2 kg gross, wall-mounted, IP21, intelligent air cooling from -10 to 55 °C, and up to 6 units in parallel

About the Felicity Solar IVCM2012P1G2 2kW Single-Phase Off-Grid Solar Inverter

The Felicity Solar IVCM2012P1G2 is a single-phase inverter-charger rated 2 kVA / 2 kW at 230 V and built around a 12 V battery bank that it works between 10.5 V and 15.75 V. It accepts up to 0.8 kW of PV at a 105 V ceiling and reaches 90% maximum efficiency. Its one MPPT tracker holds a 30-90 V window at 99% efficiency, and charging is set by a 14.1 V boost stage and a 13.5 V float, never above 15 V, at up to 120 A from solar or from AC. The single battery input takes AGM, flooded, Li-Ion or a self-defined profile, and maximum discharge current is 165 A. On the AC side the unit works from 90-280 V at 50/60 Hz on L+N+PE wiring, drops the line below 90 V and transfers in 20 ms, the line-mode output following the input waveform. Over-charge, overload, output short-circuit and over-temperature protection are standard, RS485 and CAN carry BMS traffic, and an LCD and LED panel plus built-in WiFi report status. Warranty 2 Years. We are an authorised Felicity Solar distributor and supply the IVCM2012P1G2 from our own stock.

Specifications last updated 23 July 2026

Felicity Solar IVCM2012P1G2 2kW Single-Phase Off-Grid Solar Inverter full specifications

Electrical(62)

AC Output Voltage230 V
AC Wiring ModeL+N+PE
Backup Rated Output Power2 kW
Battery Inputs1
Battery TypeAGM, Flooded, Li-Ion, Self-Defined
Battery Voltage Range10.5-15.75 V
Bulk Charging Voltage14.1 V
Charge AlgorithmThree-Stage: Boost CC, Boost CV, Float
Float Charging Voltage13.5 V
High DC Input Recovery Voltage14.5 V
High Frequency Disconnect65 Hz
High Frequency Reconnect63 Hz
High Line Disconnect Voltage280 V
High Line Reconnect Voltage270 V
Input Voltage Range90-280 V
Input Voltage Range (UPS Mode)170-280 V
Input Voltage WaveformSinusoidal (utility or generator)
Line Mode Output WaveformSame As Input Waveform
Low DC Shutdown (<50% Load)10.2 V
Low DC Shutdown (>50% Load)9.6 V
Low Frequency Disconnect40 Hz
Low Frequency Reconnect42 Hz
Low Line Disconnect (Appliance Mode)90 V
Low Line Disconnect (UPS Mode)170 V
Low Line Reconnect (Appliance Mode)100 V
Low Line Reconnect (UPS Mode)180 V
Low-Battery Recovery (<50% Load)11.2 V
Low-Battery Recovery (>50% Load)10.6 V
MPPT Efficiency99 %
MPPT Trackers1
MPPT Voltage Range30-90 V
Max AC Charge Current120 A
Max AC Input Voltage280 V
Max AC Pass-Through Current25 A
Max Charging Current120 A
Max Charging Voltage15 V
Max Discharging Current165 A
Max Efficiency90 %
Max Inverter/Rectifier Current15 A
Max PV Input Power0.8 kW
Max PV Voltage105 V
Max Solar Charging Current60 A
Motor Start CapableYes
Nominal AC Input Voltage230 V
Nominal DC Input Voltage12 V
Nominal Input Frequency50/60 Hz
Output Frequency50/60 Hz
Output Short-Circuit ProtectionYes
Output Voltage WaveformPure Sine Wave
Overload ProtectionYes
Overload Trip Time (>105% Load)10 s
Overload Trip Time (>150% Load)5 s
Pass-Through Without BatteryYes
PhaseSingle Phase
ProtectionOver Charge Protection, Overload Protection, Output Short Circuit Protection, Over Temperature Protection
Rated Apparent Output Power2 kVA
Rated Output Power2 kW
Short-Circuit Protection (Battery Mode)Electronic Circuit
Start-Up Voltage10.5 V
Strings per MPPT1
Transfer Time (Appliance Mode)20 ms
Transfer Time (UPS Mode)4 ms

Mechanical(10)

BMS CommunicationRS485, CAN
Communication InterfaceRS485, CAN
DisplayLCD, LED
Gross Weight8.2 kg
Installation StyleWall-Mounted
Monitoring ModuleBuilt-In WiFi
Net Weight6.5 kg
Package Dimensions438 x 358 x 202 mm
Parallel Capability6
TopologyHigh-Frequency

Environmental(4)

CoolingIntelligent Air Cooling
IP RatingIP21
Operating Temperature Range-10 to 55 °C
Storage Temperature-15 to 60 °C

Downloads & support

PDFThe manufacturer's sheet, to print or share

Frequently Asked Questions

How much solar can the IVCM2012P1G2 take?

0.8 kW of PV, under a maximum PV voltage of 105 V and inside an MPPT operating window of 30-90 V. The single MPPT tracker runs at 99% efficiency and the unit's maximum efficiency is 90%.

What battery does the IVCM2012P1G2 need?

12 V nominal, worked from 10.5 V to 15.75 V. Its one battery input takes AGM, flooded, Li-Ion or a self-defined profile; charging boosts at 14.1 V, floats at 13.5 V, never exceeds 15 V, and the unit starts up at 10.5 V.

Will the IVCM2012P1G2 run from a generator or a weak grid?

90-280 V is the accepted AC input range, at 50/60 Hz, from a sinusoidal utility or generator supply; below 90 V the unit disconnects from the line. Transfer takes 20 ms and in line mode the output waveform follows the input.

What warranty does the IVCM2012P1G2 carry, and what does it weigh?

2 Years. Net weight is 6.5 kg and gross weight 8.2 kg in a 438 x 358 x 202 mm package; the unit is wall-mounted, rated IP21 and runs from -10 to 55 °C.

Customer reviews