Felicity Solar Off-Grid Inverters 2-3.2 kW IVCM2012/IVCM3224P1G2

A single-phase 2 kVA / 2 kW inverter-charger built around a 12 V bank: 0.8 kW of PV inside a 30-90 V MPPT window, 120 A of charge current and 165 A of maximum discharge, in a 6.5 kg wall-mounted body.

Models Covered: IVCM2012P1G2, IVCM3224P1G2

Manufacturer: Shenzhen Felicity Solar Technology Co., Ltd.

Application: The Felicity Solar IVCM2012P1G2 is a single-phase inverter-charger rated 2 kVA / 2 kW at 230 V and built around a 12 V battery bank that it works between 10.5 V and 15.75 V. It accepts up to 0.8 kW of PV at a 105 V ceiling and reaches 90% maximum efficiency. Its one MPPT tracker holds a 30-90 V window at 99% efficiency, and charging is set by a 14.1 V boost stage and a 13.5 V float, never above 15 V, at up to 120 A from solar or from AC. The single battery input takes AGM, flooded, Li-Ion or a self-defined profile, and maximum discharge current is 165 A. On the AC side the unit works from 90-280 V at 50/60 Hz on L+N+PE wiring, drops the line below 90 V and transfers in 20 ms, the line-mode output following the input waveform. Over-charge, overload, output short-circuit and over-temperature protection are standard, RS485 and CAN carry BMS traffic, and an LCD and LED panel plus built-in WiFi report status. Warranty 2 Years. We are an authorised Felicity Solar distributor and supply the IVCM2012P1G2 from our own stock.

Download PDF Datasheet Order now WhatsApp us

Models and prices

IVCM2012P1G22 kWAED 1,600incl. VAT
IVCM3224P1G23.2 kWAED 1,600incl. VAT

Technical Specifications

Technical Specifications
Parameter	IVCM2012P1G2	IVCM3224P1G2
Performance & Electrical
AC Output Voltage	230 V
AC Wiring Mode	L+N+PE
Backup Rated Output Power	2 kW	3.2 kW
Battery Inputs	1
Battery Type	AGM, Flooded, Li-Ion, Self-Defined
Battery Voltage Range	10.5-15.75 V	21-31.5 V
Bulk Charging Voltage	14.1 V	28.2 V
Charge Algorithm	Three-Stage: Boost CC, Boost CV, Float
Float Charging Voltage	13.5 V	27 V
High DC Input Recovery Voltage	14.5 V	29 V
High Frequency Disconnect	65 Hz
High Frequency Reconnect	63 Hz
High Line Disconnect Voltage	280 V
High Line Reconnect Voltage	270 V
Input Voltage Range	90-280 V
Input Voltage Range (Appliance Mode)	90-280 V
Input Voltage Range (UPS Mode)	170-280 V
Input Voltage Waveform	Sinusoidal (utility or generator)
Line Mode Output Waveform	Same As Input Waveform
Low DC Shutdown (>50% Load)	9.6 V	19.2 V
Low Frequency Disconnect	40 Hz
Low Frequency Reconnect	42 Hz
Low Line Disconnect (Appliance Mode)	90 V
Low Line Disconnect (UPS Mode)	170 V
Low Line Reconnect (Appliance Mode)	100 V
Low Line Reconnect (UPS Mode)	180 V
Low-Battery Recovery (>50% Load)	10.6 V	21.2 V
MPPT Efficiency	99%
MPPT Trackers	1
MPPT Voltage Range	30-90 V
Max AC Charge Current	120 A
Max AC Input Voltage	280 V
Max AC Pass-Through Current	25 A
Max Charging Current	120 A
Max Charging Voltage	15 V	30 V
Max Discharging Current	165 A	135 A
Max Efficiency	90%	93%
Max Inverter/Rectifier Current	15 A	25 A
Max PV Input Power	0.8 kW	1.6 kW
Max PV Voltage	105 V
Max Solar Charging Current	60 A
Motor Start Capable	Yes
Nominal AC Input Voltage	230 V
Nominal DC Input Voltage	12 V	24 V
Nominal Input Frequency	50/60 Hz
Output Frequency	50/60 Hz
Output Short-Circuit Protection	Yes
Output Voltage Waveform	Pure Sine Wave
Overload Protection	Yes
Overload Trip Time (>105% Load)	10 s
Overload Trip Time (>150% Load)	5 s
Pass-Through Without Battery	Yes
Phase	Single Phase
Protection	Over Charge Protection, Overload Protection, Output Short Circuit Protection, Over Temperature Protection
Rated Apparent Output Power	2 kVA	3.2 kVA
Rated Output Power	2 kW	3.2 kW
Short-Circuit Protection (Battery Mode)	Electronic Circuit
Start-Up Voltage	10.5 V	21.0 V
Strings per MPPT	1
Transfer Time (Appliance Mode)	20 ms
Transfer Time (UPS Mode)	4 ms
Build & Interfaces
BMS Communication	RS485, CAN
Communication Interface	RS485, CAN
Display	LCD, LED
Gross Weight	8.2 kg
Installation Style	Wall-Mounted
Monitoring Module	Built-In WiFi
Net Weight	6.5 kg
Package Dimensions	438 x 358 x 202 mm
Parallel Capability	6
Topology	High-Frequency
Operating Environment
Cooling	Intelligent Air Cooling
IP Rating	IP21
Operating Temperature Range	-10 to 55 °C
Storage Temperature	-15 to 60 °C

Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.

Availability & grid compliance in the UAE

Market	UAE
Grid authority / regulator	DEWA, ADDC, SEWA
Quotation currency	AED
Support hours timezone	Asia/Dubai
Main cities	Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah

Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in the UAE that rests with the local authorities (DEWA, ADDC, SEWA). Confirm the grid code, import requirements and any local certification with them, or with us, before you order.

For prices, see Felicity Solar Systems: Prices in UAE. Store pickup — collect your order from our store in Dubai or Riyadh.

Key Features & Technical Highlights

Rated 2 kVA / 2 kW at 230 V single phase, with 2 kW also held as backup rated output power
0.8 kW of PV input under a 105 V maximum, tracked by one MPPT across a 30-90 V window at 99% efficiency
12 V nominal battery bank worked from 10.5 V to 15.75 V, boosted at 14.1 V, floated at 13.5 V and capped at 15 V
Up to 120 A of charge current from AC or solar, 165 A of maximum discharge current and 15 A maximum inverter/rectifier current
90-280 V AC input at 50/60 Hz on L+N+PE wiring, 90 V low-line disconnect and a 20 ms transfer time
6.5 kg net and 8.2 kg gross, wall-mounted, IP21, intelligent air cooling from -10 to 55 °C, and up to 6 units in parallel
3.2 kVA and 3.2 kW rated output: The IVCM3224P1G2 is rated 3.2 kVA and 3.2 kW at 230 V single phase, with a 3.2 kW backup rated output.
1.6 kW PV input under a 105 V ceiling: A single MPPT input accepts up to 1.6 kW of array with a 105 V maximum PV voltage.
99% MPPT efficiency across 30-90 V: The tracker holds 99% MPPT efficiency over a 30-90 V window from a 21.0 V start-up, feeding a 93% maximum conversion efficiency.
28.2 V boost and 27 V float charging: Charging runs 28.2 V boost and 27 V float under a 30 V maximum charging voltage, across a 21-31.5 V battery range.
120 A charge and 135 A discharge current: One battery input on the IVCM3224P1G2 carries up to 120 A charge current and 135 A discharge for AGM, Flooded, Li-Ion and self-defined banks.
6.5 kg wall-mounted, up to 6 in parallel: The IVCM3224P1G2 mounts on a wall at 6.5 kg net and 8.2 kg gross, rated IP21, with RS485 and CAN and up to 6 units in parallel.

Frequently Asked Questions

How much solar can the IVCM2012P1G2 take?

0.8 kW of PV, under a maximum PV voltage of 105 V and inside an MPPT operating window of 30-90 V. The single MPPT tracker runs at 99% efficiency and the unit's maximum efficiency is 90%.

What battery does the IVCM2012P1G2 need?

12 V nominal, worked from 10.5 V to 15.75 V. Its one battery input takes AGM, flooded, Li-Ion or a self-defined profile; charging boosts at 14.1 V, floats at 13.5 V, never exceeds 15 V, and the unit starts up at 10.5 V.

Will the IVCM2012P1G2 run from a generator or a weak grid?

90-280 V is the accepted AC input range, at 50/60 Hz, from a sinusoidal utility or generator supply; below 90 V the unit disconnects from the line. Transfer takes 20 ms and in line mode the output waveform follows the input.

What warranty does the IVCM2012P1G2 carry, and what does it weigh?

2 Years. Net weight is 6.5 kg and gross weight 8.2 kg in a 438 x 358 x 202 mm package; the unit is wall-mounted, rated IP21 and runs from -10 to 55 °C.

How much load will the IVCM3224P1G2 carry?

3.2 kVA and 3.2 kW is the rated output at 230 V single phase, and the backup rated output is 3.2 kW. Maximum conversion efficiency is 93%, transfer time is 20 ms, and over-charge, overload, output short-circuit and over-temperature protection are built in.

How large a solar array can the IVCM3224P1G2 take?

1.6 kW is the maximum PV input power, under a 105 V maximum PV voltage. One MPPT tracker works across a 30-90 V range at 99% MPPT efficiency, and the start-up voltage is 21.0 V.

Which batteries does the IVCM3224P1G2 charge, and at what voltage?

24 V nominal, over a 21-31.5 V range: 28.2 V boost, 27 V float and a 30 V maximum charging voltage, at up to 120 A charge current and 135 A discharge. One battery input takes AGM, Flooded, Li-Ion and self-defined types, with RS485 and CAN BMS communication.

What are the IVCM3224P1G2 shipping dimensions, weight and warranty?

438 x 358 x 202 mm is the package dimension; the unit is 6.5 kg net and 8.2 kg gross, wall-mounted, rated IP21 and operating from -10 to 55 °C with intelligent air cooling. Warranty is 2 Years.