2.25 kW rated output at 230 V
the X-RAY-BDM2250W delivers 9.78 A on a single phase, wired L+N+PE

InvertersModel X-RAY-BDM2250W
Four panels, four trackers: the X-RAY-BDM2250W gives every input its own MPPT, 750 W and 20 A up to 60 V, and returns 2.25 kW at 230 V with under 5% THD.
In stock
the X-RAY-BDM2250W delivers 9.78 A on a single phase, wired L+N+PE
one string on each tracker, 20 A and up to 60 V per module
every input tracks its own panel across the full range
ground fault current monitoring runs on all four inputs
6 kg in a 320 x 240 x 35 mm body
output holds a power factor above 0.99 and THD below 5% at 50/60 Hz
The Felicity Solar X-RAY-BDM2250W is a 2.25 kW single-phase microinverter with four independent MPPT trackers, one string on each, accepting 750 W and 20 A per input at a maximum PV voltage of 60 V and returning 230 V AC at 9.78 A. MPPT efficiency is 99.9% across a 22-55 V tracking window. Because each of the four inputs tracks its own module, a shaded or soiled panel does not drag the other three down with it. The AC side is wired L+N+PE at 50/60 Hz, holds a power factor above 0.99 and keeps total harmonic distortion below 5%. Ground fault current monitoring runs continuously alongside GFDI and surge protection. The sealed IP66/IP67 enclosure is naturally cooled, weighs 6 kg, measures 320 x 240 x 35 mm and is rated from -40°C to 65°C. Monitoring is built-in WiFi, so there is no separate dongle to buy. We are an authorised Felicity Solar distributor, and the X-RAY-BDM2250W carries a 2 Years warranty.
Specifications last updated 23 March 2026
| AC Output Voltage | 230 V |
|---|---|
| AC Rated Output Current | 9.78 A |
| AC Wiring Mode | L+N+PE |
| Ground Fault Current Monitoring | Yes |
| MPPT Efficiency | 99.9 % |
| MPPT Trackers | 4 |
| MPPT Voltage Range | 22-55 V |
| Max PV Input Current | 20+20+20+20 A |
| Max PV Voltage | 60 V |
| Max Recommended PV Power | 0.75+0.75+0.75+0.75 kW |
|---|---|
| Nominal Input Frequency | 50/60 Hz |
| Output Frequency | 50/60 Hz |
| Phase | Single Phase |
| Power Factor | >0.99 |
| Protection | GFDI, Surge Protection |
| Rated Output Power | 2.25 kW |
| Strings per MPPT | 1 |
| Total Harmonic Distortion | <5 % |
| Monitoring Module | Built-In WiFi |
|---|---|
| Net Weight | 6 kg |
| Cooling | Nature |
|---|---|
| IP Rating | IP66/IP67 |
| Operating Temperature Range | -40 to 65 °C |
Four. The X-RAY-BDM2250W has four MPPT trackers with one string on each, and every input takes up to 750 W and 20 A at a maximum PV voltage of 60 V, tracked across a 22-55 V window.
2.25 kW. The output is single phase at 230 V and 9.78 A, wired L+N+PE at 50/60 Hz, with a power factor above 0.99 and total harmonic distortion below 5%.
IP66/IP67 is its enclosure rating, and it is rated to operate from -40°C to 65°C on natural cooling. The unit weighs 6 kg and measures 320 x 240 x 35 mm.
Built-in WiFi is the monitoring module, so no separate dongle is needed. GFDI, surge protection and continuous ground fault current monitoring guard the four inputs, and the X-RAY-BDM2250W carries a 2 Years warranty.