
Felicity Solar SCCM4524-III Solar Charge Controller
- PV Start-up Voltage:20V
- Nominal System Voltage:12V, 24V, 48V (Auto Detection)

The Felicity SCCM8048-III is a solar charge controller with specifications as published by the manufacturer.
In stock
The Felicity SCCM8048-III is a solar charge controller with specifications as published by the manufacturer. Every figure on this page is taken from the manufacturer's datasheet for the SCCM8048-III. We are an authorised Felicity Solar distributor and supply the SCCM8048-III from our own stock, with technical support before and after the sale.
Specifications last updated 17 August 2026
| PV Start-up Voltage | 20V |
|---|---|
| Nominal System Voltage | 12V, 24V, 48V (Auto Detection) |
| Temperature Compensation Coefficient | -5 mV/°C/cell (25°Cref.) |
| Maximum Charge Current | 80 A |
| Nominal System Voltage | 12-48 V |
| MPPT Voltage Range | 18-125 V |
| Maximum PV Input Voltage | 145 V |
| Maximum PV Input Power | 1100-4400 W |
| Maximum Efficiency | 98 % |
| Charging Algorithm | 3-Step |
| Supported Battery Types | AGM, Gel, Flooded, Lithium, User-Defined |
| Communication | RS485, CAN, MODBUS, Bluetooth, WiFi |
| Ingress Protection | IP20 |
| Surge Protection | 4500 W/port |
| Installation | Wall-Mounted |
| Net Weight | 3.5 kg |
| Ambient Temperature Range | 0°C to +55 °C |
|---|---|
| Storage Temperature | -25 °C to +75 °C |
| Humidity | 0%-90%RH (No Condensing) |
Looking up an error code on this FelicityESS SCCM3024-III? Browse the full list of codes for this device, with the cause and recommended fix for each.
View error codes for this device →







What solar energy actually is, where it comes from, and the difference between photovoltaic, thermal and concentrated solar — then the whole chain, photon to wall socket, with the benefits and the drawbacks stated honestly.
Read: Solar Energy Explained: Where It Comes From and How It Reaches Your Socket →Most pumps that refuse to turn are sitting on an inverter that looked big enough on paper. Here is the one line on the listing that decides it, why the kilowatt figure on the box misleads, and how to turn your pump's own nameplate into a model you can order.
Read: Which Solar Inverter Will Actually Start My Water Pump? →Solar panels producing less than expected? Diagnose 8 common causes — dust, shade, heat derating, wiring issues — and restore full power output today.
Read: Solar Panel Low Output? 8 Causes and How to Fix Them →80 A is its maximum charge current, into a 12-48 V bank that the controller detects automatically. Every figure here is from the manufacturer's data for the SCCM8048-III.
Maximum PV input voltage is 145 V and array power is rated 1100-4400 W across the supported battery voltages. Tracking starts once the array reaches 20 V.
AGM, Gel, Flooded, Lithium, User-Defined. It charges in 3-step stages with a temperature compensation of -5 mV/°C/cell (25 °C ref.).