
Felicity Solar SCCM4524-III Solar Charge Controller
- PV Start-up Voltage:20V
- Nominal System Voltage:12V, 24V, 48V (Auto Detection)

The Felicity SCCM6048-III is a solar charge controller with specifications as published by the manufacturer.
In stock
The Felicity SCCM6048-III is a solar charge controller with specifications as published by the manufacturer. Every figure on this page is taken from the manufacturer's datasheet for the SCCM6048-III. We are an authorised Felicity Solar distributor and supply the SCCM6048-III from our own stock, with technical support before and after the sale.
Specifications last updated 17 August 2026
| PV Start-up Voltage | 20V |
|---|---|
| Nominal System Voltage | 12V, 24V, 48V (Auto Detection) |
| Temperature Compensation Coefficient | -5 mV/°C/cell (25°Cref.) |
| Maximum Charge Current | 60 A |
| Nominal System Voltage | 12-48 V |
| MPPT Voltage Range | 18-125 V |
| Maximum PV Input Voltage | 145 V |
| Maximum PV Input Power | 825-3300 W |
| Maximum Efficiency | 98 % |
| Charging Algorithm | 3-Step |
| Supported Battery Types | AGM, Gel, Flooded, Lithium, User-Defined |
| Communication | RS485, CAN, MODBUS, Bluetooth, WiFi |
| Ingress Protection | IP20 |
| Surge Protection | 4500 W/port |
| Installation | Wall-Mounted |
| Net Weight | 3.3 kg |
| Ambient Temperature Range | 0°C to +55 °C |
|---|---|
| Storage Temperature | -25 °C to +75 °C |
| Humidity | 0%-90%RH (No Condensing) |
Looking up an error code on this FelicityESS SCCM3024-III? Browse the full list of codes for this device, with the cause and recommended fix for each.
View error codes for this device →







A mast, a work camp, a holding or a guard post with no supply behind it. What changes when there is no grid to top the battery up: how much extra solar to carry, the four things that decide how long you last, whether the box can stand outside, and what remote monitoring can honestly promise.
Read: Solar for a Remote Site With Nothing to Fall Back On →Panels that will not fit the inverter you already own, and a battery bank you cannot grow without replacing it — both come from taking four decisions in the wrong order. Here is the order, and what each step rules out for the one after it.
Read: How to Build a Solar System That Runs a Whole Farm →Learn how to install an MPPT or PWM solar charge controller correctly. Covers wiring sequence, cable sizing, battery configuration, and common mistakes.
Read: How to Install a Solar Charge Controller: Step-by-Step Guide →60 A is its maximum charge current, into a 12-48 V bank that the controller detects automatically. Every figure here is from the manufacturer's data for the SCCM6048-III.
Maximum PV input voltage is 145 V and array power is rated 825-3300 W across the supported battery voltages. Tracking starts once the array reaches 20 V.
AGM, Gel, Flooded, Lithium, User-Defined. It charges in 3-step stages with a temperature compensation of -5 mV/°C/cell (25 °C ref.).