Felicity Solar SCCM4524-II

Felicity Solar SCCM4524-II 45A Solar Charge Controller

The SCCM4524-II holds a 12V/24V (Auto) bank at 45 A, tracking a 95 V array inside 30-80 VDC on 24 V, from a 265 x 188 x 116 mm indoor wall unit.

  • Maximum Charge Current: 45 A
  • Maximum Efficiency: 98 %
  • Nominal System Voltage: 12V/24V (Auto)
AED 225incl. VAT

In stock

Felicity Solar SCCM4524-II 45A Solar Charge Controller features

Up to 45 A into a 12V/24V (Auto) bank

The SCCM4524-II sets its own bank voltage before charging at 45 A.

95 V maximum solar input voltage

The SCCM4524-II begins tracking from a 15V PV start-up voltage.

1250 W of array at 24 V and 625 W at 12 V

Conversion reaches up to 98% maximum efficiency across that range.

MPPT window of 30-80 VDC at 24 VDC

The same window narrows to 15-80 VDC once the bank is 12 VDC.

Transient surge protection rated 4500 Watts / port

A 3-Step charge is corrected by -5 mV/°C/cell @ 25°C ref over 0 °C to +50 °C.

A 3.36 kg case of 265 x 188 x 116 mm

Indoor wall-mount, IP31, with an LCD (built-in), CAN, RS485 and WiFi.

About the Felicity Solar SCCM4524-II 45A Solar Charge Controller

Sized at 45 A of charge current, the SCCM4524-II from Felicity Solar is an MPPT solar charge controller that pairs with a 12V/24V (Auto) battery bank, accepts an array of up to 95 V, and takes 1250 W of panels on a 24 V bank or 625 W on 12 V, converting at up to 98% maximum efficiency. That 45 A rating is what sets the 1250 W ceiling on the 24 V side. Tracking works inside 30-80 VDC once the bank is 24 V and inside 15-80 VDC on 12 V, waking at a 15V PV start-up voltage. A 3-Step charging algorithm runs the cycle, corrected by -5 mV/°C/cell @ 25°C ref over 0 °C to +50 °C. Terminals carry 4500 Watts / port of transient surge protection, an LCD (built-in) reads out the state, and CAN, RS485 and WiFi (built-in) move the data. The case measures 265 x 188 x 116 mm for 3.36 kg, rated IP31 in an IP20 (Indoor & Vented) enclosure for indoor wall-mount, working 0°C to 55°C. We are an authorised Felicity Solar distributor, and the SCCM4524-II carries a warranty of 2 Years.

Specifications last updated 23 March 2026

Felicity Solar SCCM4524-II 45A Solar Charge Controller full specifications

Electrical

Transient Surge Protection4500 Watts / port
Maximum Charge Current45 A
Nominal System Voltage12V/24V (Auto)
Maximum Solar Input Voltage95 V
PV Array MPPT Voltage Range12 VDC: 15-80 VDC / 24 VDC: 30-80 VDC
Maximum Input Power12V - 625W / 24V - 1250W
PV Start-up Voltage15V
Charging Algorithm3-Step
Charging StagesBulk, Absorption, Float
Temperature Compensation Coefficient-5 mV/°C/cell @ 25°C ref
CommunicationCAN (parallel), RS485 (BMS), WiFi (built-in)
Maximum Efficiency98 %
Compatible PV Systems12V/24V/48V

Mechanical

Product Size (W x H x D,mm)265x188x116 mm
DisplayLCD (built-in)
InstallationIndoor wall-mount
IP RatingIP31

Environmental

Humidity0%-90%RH(No condensing)
Storage Temperature- 25°C to 75°C
Temperature compensation range0 °C to +50 °C
Ambient Temperature Range0°C to +55°C
Enclosure RatingIP20 (Indoor & Vented)
Warranty2 Years
Automatic Battery Voltage DetectionYes
Operating Temperature0°C to 55°C

Troubleshooting & error codes

Looking up an error code on this FelicityESS SCCM3024-III? Browse the full list of codes for this device, with the cause and recommended fix for each.

View error codes for this device →