Felicity Solar SCCM10048-II

Felicity Solar SCCM10048-II 100A Solar Charge Controller

A 100 A MPPT solar charge controller that takes 195 V of panel input and up to 5500 W of array on a 48 V bank, tracking from 60-170 VDC at 98% efficiency.

  • Maximum Charge Current: 100 A
  • Maximum Efficiency: 98 %
  • Nominal System Voltage: 12V/24V/48V (Auto)
AED 500incl. VAT

In stock

Felicity Solar SCCM10048-II 100A Solar Charge Controller features

100 A maximum charge current

The SCCM10048-II delivers up to 100 A of charge current into a 12 V, 24 V or 48 V battery bank it detects automatically.

195 V maximum PV input voltage

The solar input accepts an array voltage of up to 195 V and begins tracking from a PV start-up voltage of 15 V.

5500 W of array on a 48 V bank

Array capacity follows battery voltage: 1375 W at 12 V, 2750 W at 24 V and 5500 W at 48 V.

98% maximum conversion efficiency

Peak efficiency reaches 98%, with MPPT tracking from 60-170 VDC at 48 V, 30-170 VDC at 24 V and 15-170 VDC at 12 V.

4500 Watts of surge protection per port

Each port carries 4500 Watts of transient surge protection, and the 3-Step charge profile compensates -5 mV/°C/cell referenced at 25°C.

CAN, RS485 and built-in WiFi

CAN handles parallel operation, RS485 carries BMS data and WiFi is built in, with readings on the built-in LCD.

About the Felicity Solar SCCM10048-II 100A Solar Charge Controller

The Felicity Solar SCCM10048-II is a 100 A MPPT solar charge controller for 12 V, 24 V and 48 V battery banks, which it detects automatically. It accepts up to 195 V of PV input voltage and up to 5500 W of solar array on a 48 V bank, converting at a maximum efficiency of 98%. MPPT tracking runs from 60-170 VDC at 48 V, 30-170 VDC at 24 V and 15-170 VDC at 12 V, above a 15 V PV start-up threshold, with array limits of 1375 W at 12 V and 2750 W at 24 V. A 3-Step charging profile with -5 mV/°C/cell temperature compensation referenced at 25°C protects the bank, and every port carries 4500 Watts of transient surge protection. CAN handles parallel operation, RS485 carries BMS traffic and WiFi is built in, alongside a built-in LCD. The unit measures 360 x 250 x 156 mm, weighs 5.1 kg and wall-mounts indoors in an IP20 (Indoor & Vented) enclosure rated 0°C to 55°C. We are an authorised Felicity Solar distributor and supply the SCCM10048-II from our own stock; warranty is 2 Years.

Specifications last updated 23 March 2026

Felicity Solar SCCM10048-II 100A Solar Charge Controller full specifications

Electrical

Maximum Solar Input Voltage195V
Maximum Charge Current100 A
Nominal System Voltage12V/24V/48V (Auto)
PV Array MPPT Voltage Range12 VDC: 15-170 VDC / 24 VDC: 30-170 VDC / 48 VDC: 60-170 VDC
Maximum Input Power12V - 1375W / 24V - 2750W / 48V - 5500W
PV Start-up Voltage15V
Charging Algorithm3-Step
Charging StagesBulk, Absorption, Float
Temperature Compensation Coefficient-5 mV/°C/cell @ 25°C ref
CommunicationCAN (parallel), RS485 (BMS), WiFi (built-in)
Maximum Efficiency98 %
Transient Surge Protection4500 Watts / port

Mechanical

Product Size (W x H x D,mm)360x250x156 mm
DisplayLCD (built-in)
InstallationIndoor wall-mount
Dimensions (A x B)255 x 197 mm

Environmental

Humidity0%-90%RH(No condensing)
Storage Temperature- 25°C to 75°C
Temperature compensation range0 °C to +50 °C
Ambient Temperature Range0°C to +55°C
Enclosure RatingIP20 (Indoor & Vented)
Warranty2 Years
Operating Temperature0°C to 55°C

Certifications

  • CE
  • ISO9001

Comparisons featuring this product

Troubleshooting & error codes

Looking up an error code on this FelicityESS SCCM3024-III? Browse the full list of codes for this device, with the cause and recommended fix for each.

View error codes for this device →