Felicity Solar Charge Controllers SCCM10048-II
A 100 A MPPT solar charge controller that takes 195 V of panel input and up to 5500 W of array on a 48 V bank, tracking from 60-170 VDC at 98% efficiency.
Models and prices
- SCCM10048-IIAED 500incl. VAT
Technical Specifications
| Parameter | SCCM10048-II |
|---|---|
| Additional Specifications | |
| Maximum Solar Input Voltage | 195V |
| Maximum Charge Current | 100 A |
| Nominal System Voltage | 12V/24V/48V (Auto) |
| PV Array MPPT Voltage Range | 12 VDC: 15-170 VDC / 24 VDC: 30-170 VDC / 48 VDC: 60-170 VDC |
| Maximum Input Power | 12V - 1375W / 24V - 2750W / 48V - 5500W |
| PV Start-up Voltage | 15V |
| Charging Algorithm | 3-Step |
| Charging Stages | Bulk, Absorption, Float |
| Temperature Compensation Coefficient | -5 mV/°C/cell (25 °C ref.) |
| Communication | CAN (parallel), RS485 (BMS), WiFi (built-in) |
| Transient Surge Protection | 4500 Watts / port |
| Product Size (W x H x D,mm) | 360x250x156 mm |
| Display | LCD |
| Installation | Wall-Mounted |
| Humidity | 0%-90%RH(No condensing) |
| Storage Temperature | - 25°C to 75°C |
| Ambient Temperature Range | 0°C to +55°C |
| Enclosure Rating | IP20 (Indoor & Vented) |
| Warranty | 2 Years |
| Efficiency | |
| Maximum Efficiency | 98% |
| Performance & Electrical | |
| System Nominal Voltage | 12-48 V |
| Max Charge Current | 100 A |
| Max PV Input Power | 1375-5500 W |
| Max PV Input Voltage | 195 V |
| MPPT Voltage Range | 15-170 V |
| Max Efficiency | 98% |
| Supported Battery Types | AGM, Gel, Flooded, Lithium, User-Defined |
| Temperature compensation range | 0 °C to +50 °C |
| Surge Protection | 4500 W/port |
| Protection Features | Solar high voltage disconnect, Solar high voltage reconnect, Battery high voltage disconnect, Battery high voltage reconnect, High temperature disconnect, High temperature reconnect |
| Operating Temperature | 0°C to 55°C |
| Storage Temperature Range | -25 to 75 °C |
| Mechanical Data | |
| Dimensions (A x B) | 255 x 197 mm |
| Build & Interfaces | |
| Communication Interface | USB, MODBUS |
| Overall Dimensions | 360 x 250 x 156 mm |
| Weight | 5.1 kg |
| Operating Environment | |
| IP Rating | IP20 |
| Relative Humidity | 0-90 (non-condensing)% |
Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.
Availability & grid compliance in the UAE
| Market | UAE |
|---|---|
| Grid authority / regulator | DEWA, ADDC, SEWA |
| Quotation currency | AED |
| Support hours timezone | Asia/Dubai |
| Main cities | Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in the UAE that rests with the local authorities (DEWA, ADDC, SEWA). Confirm the grid code, import requirements and any local certification with them, or with us, before you order.
Key Features & Technical Highlights
- 100 A maximum charge current: The SCCM10048-II delivers up to 100 A of charge current into a 12 V, 24 V or 48 V battery bank it detects automatically.
- 195 V maximum PV input voltage: The solar input accepts an array voltage of up to 195 V and begins tracking from a PV start-up voltage of 15 V.
- 5500 W of array on a 48 V bank: Array capacity follows battery voltage: 1375 W at 12 V, 2750 W at 24 V and 5500 W at 48 V.
- 98% maximum conversion efficiency: Peak efficiency reaches 98%, with MPPT tracking from 60-170 VDC at 48 V, 30-170 VDC at 24 V and 15-170 VDC at 12 V.
- 4500 Watts of surge protection per port: Each port carries 4500 Watts of transient surge protection, and the 3-Step charge profile compensates -5 mV/°C/cell referenced at 25°C.
- CAN, RS485 and built-in WiFi: CAN handles parallel operation, RS485 carries BMS data and WiFi is built in, with readings on the built-in LCD.
Frequently Asked Questions
How many amps can the SCCM10048-II charge at?
100 A is the maximum charge current of the SCCM10048-II, delivered into a 12 V, 24 V or 48 V bank that the controller detects automatically. Charging follows a 3-Step profile at a maximum efficiency of 98%.
What is the biggest solar array the SCCM10048-II can take?
195 V is the maximum PV input voltage, and array power is capped at 1375 W on a 12 V bank, 2750 W on 24 V and 5500 W on 48 V. Tracking starts at a PV start-up voltage of 15 V.
What is the MPPT voltage range of the SCCM10048-II?
60-170 VDC on a 48 V battery bank, 30-170 VDC on 24 V and 15-170 VDC on 12 V. The PV start-up voltage is 15 V and the absolute maximum solar input is 195 V.
What size is the SCCM10048-II and how is it mounted?
360 x 250 x 156 mm and 5.1 kg, wall-mounted indoors. The IP20 (Indoor & Vented) enclosure runs from 0°C to 55°C in 0%-90%RH non-condensing air, and stores from - 25°C to 75°C.