94Fault

Felicity inverter error 94 (F94)

CAN ID Conflict

Also displayed as F94 on some models.

Faultthe inverter cuts its output and the red LED stays solid until the fault is cleared.

The exact meaning depends on your model:

IVGM5KL-P1G1

InverterFault

Also applies to:IVGM6KL-P1G1IVGM7K6L-P1G1IVGM8KL-P1G1

What it means

CAN ID ConflictCAN ID of different inverters is in conflict.

Cause: Two or more inverters on the parallel CAN bus are set to the same CAN ID — or two units are both configured as master in one phase — so their messages collide.

How to fix it

  1. Please check whether CAN ID of different inverters is same
  2. Please check whether there are two masters in one phase.

Source: Felicitysolar IVGM Series Hybrid inverter Instruction Manual.pdf, p.56

T-REX-50KHP3G01

InverterFault

What it means

PV side busbar rapid overvoltageBus voltage too high, shutdown and restart.

Cause: The PV-side DC bus voltage rose above its protection ceiling too quickly for normal regulation to respond — a fast transient overvoltage rather than a slow drift.

How to fix it

  1. Power down the inverter, wait 5 minutes for capacitors to discharge, then restart.
  2. If the fault recurs immediately or repeatedly, record the exact code and contact your installer or the manufacturer's service line.

Source: T-REX-50KHP3G01-user-manual-.pdf, p.49

Frequently asked questions

What does error 94 mean on a Felicity inverter?
It depends on the model — 2 devices use code 94. On the IVGM5KL-P1G1 it means: CAN ID Conflict. The card for each model on this page gives its exact meaning and fix.
Is error 94 a fault or a warning?
94 is a fault code: the inverter cuts its output and the red LED stays solid until it is cleared.
How do I clear or fix error 94?
1. Please check whether CAN ID of different inverters is same; 2. The exact steps for each affected model are listed on this page.

Related error codes

Prefer the full written guide? Read the complete Felicity inverter error-code guide

Compiled from official Felicity user manuals. Always consult your device manual and a qualified technician before performing repairs.