92Fault

Felicity inverter error 92 (F92)

Parallel Version is inconsistent

Also displayed as F92 on some models.

Fault — the inverter cuts its output and the red LED stays solid until the fault is cleared.

The exact meaning depends on your model:

IVGM5KL-P1G1

InverterFault

Also applies to:IVGM6KL-P1G1IVGM7K6L-P1G1IVGM8KL-P1G1

What it means

Parallel Version is inconsistent — Parallel inverters have inconsistent software versions.

Cause: The paralleled inverters are running different firmware versions; the parallel protocol requires every unit on the link to match before the group will run.

How to fix it

  1. Check whether the software version of the inverter is same
  2. Restart the system 2~3 times
  3. Seek help from us, if can not go back to normal state.

Source: Felicitysolar IVGM Series Hybrid inverter Instruction Manual.pdf, p.52 · Felicitysolar IVGM Series Hybrid inverter Instruction Manual.pdf, p.56

T-REX-50KHP3G01

InverterFault

What it means

BMS1 communication failure — BMS1 fails to communicate normally, check the BMS1 communication cable.

Cause: Communication has been lost between the inverter and a peripheral device — typically a battery BMS, smart meter, or external monitoring dongle.

How to fix it

  1. Verify the communication cable (CAN/RS485/Modbus) is correctly seated and the right pinout is used.
  2. Check baud rate and protocol settings in both devices match.
  3. Reseat the dongle/comms module.
  4. For BMS comms, confirm the battery is powered on and not in deep-discharge protection.

Source: T-REX-50KHP3G01-user-manual-.pdf, p.49

Frequently asked questions

What does error 92 mean on a Felicity inverter?
It depends on the model — 2 devices use code 92. On the IVGM5KL-P1G1 it means: Parallel Version is inconsistent. The card for each model on this page gives its exact meaning and fix.
Is error 92 a fault or a warning?
92 is a fault code: the inverter cuts its output and the red LED stays solid until it is cleared.
How do I clear or fix error 92?
1. Check whether the software version of the inverter is same; 2. The exact steps for each affected model are listed on this page.

Related error codes

Other codes on the IVGM5KL-P1G1

All IVGM5KL-P1G1 codes

Other codes on the T-REX-50KHP3G01

All T-REX-50KHP3G01 codes

Prefer the full written guide? Read the complete Felicity inverter error-code guide

Compiled from official Felicity user manuals. Always consult your device manual and a qualified technician before performing repairs.