Felicity Solar IVGM10KLP3G1

InvertersModel IVGM10KLP3G1

Felicity Solar IVGM10KLP3G1 10kW Three-Phase Hybrid Solar Inverter

The Felicity Solar IVGM10KLP3G1 is a 10 kW three-phase hybrid solar inverter rated 10 kVA at 380-400 V, with 97.6% peak efficiency and 15 kW of PV input. Two MPPT trackers and a 40-60 V battery port charging at up to 210 A make it a full grid-tied, off-grid and UPS solution.

  • Rated Output Power: 10 kW
  • Max Apparent Power: 11 kVA
  • Max Efficiency: 97.6 %
  • Max PV Input Power: 15 kW

Models in the IVGM10KLP3G1 – IVGM20KLP3G1 family

What sets the IVGM10KLP3G1 apart from the other 6 models in the family: AC Rated Output Current 14.5 A; Backup Rated Output Power 10 kW; MPPT Full-Load Voltage Range 289-800 V; Max AC Input Current 16 A; Max AC Pass-Through Current 70 A; Max Apparent Power 11 kVA; Max Charging Current 210 A; Max Discharging Current 210 A.

AED 5,500incl. VAT

In stock

  • Delivered within 3 business days, door to door, to every market we serve.
  • Dispatched the same business day for an order placed before 21:00 (Dubai time), or the next business day after.
  • Delivery charge: free
  • 2-year warranty
Full SpecificationsDownload datasheet (PDF)

Felicity Solar IVGM10KLP3G1 10kW Three-Phase Hybrid Solar Inverter features

  • 10 kW rated output and 10 kVA apparent power, 11 kVA maximum, at 380-400 V three-phase in a 3L+N+PE wiring mode

  • 97.6% maximum conversion efficiency with 99.9% MPPT tracking efficiency and total harmonic distortion below 3%

  • 15 kW maximum PV input over 2 MPPT trackers and 2+2 strings, 160-650 V MPPT range and 800 V maximum PV voltage

  • Two battery inputs at 40-60 V with up to 210 A charge and 210 A discharge, lithium-ion or lead-acid, BMS over RS485 or CAN

  • 20 ms transfer time and 70 A AC pass-through across programmable on-grid, off-grid and UPS modes, 2x rated surge for 10 s

  • IP65 wall-mounted enclosure with smart cooling, -25 °C to 60 °C operating range and up to 10 units in parallel

About the Felicity Solar IVGM10KLP3G1 10kW Three-Phase Hybrid Solar Inverter

The Felicity Solar IVGM10KLP3G1 is a 10 kW three-phase hybrid solar inverter that delivers 10 kW of rated output and 10 kVA of apparent power at 380-400 V line voltage, accepts up to 15 kW of PV, and charges a 40-60 V lithium or lead-acid battery bank at up to 210 A. Peak conversion efficiency is 97.6% and MPPT tracking efficiency is 99.9%. Two independent MPPT trackers, wired 2+2 strings, work across a 160-650 V window up to a maximum 800 V PV input, so two roof orientations can be run separately. On-grid, off-grid and UPS modes are programmable, and the 20 ms transfer time keeps sensitive loads running when the grid drops; up to 10 units run in parallel on larger sites. The IP65 enclosure, smart cooling and -25 °C to 60 °C operating range suit demanding installations. An LCD touch screen, WiFi/4G monitoring and RS485 or CAN BMS communication complete the unit. We are an authorised Felicity Solar distributor and supply the IVGM10KLP3G1 from our own stock.

Specifications last updated 23 March 2026

Felicity Solar IVGM10KLP3G1 10kW Three-Phase Hybrid Solar Inverter full specifications

Electrical(50)

AC Output Line Voltage380-400 V
AC Output Voltage220-230 V
AC Rated Output Current14.5 A
AC Wiring Mode3L+N+PE
Backup Rated Output Power10 kW
Battery Inputs2
Battery TypeLead-Acid, Li-Ion
Battery Voltage Range40-60 V
Charge AlgorithmSelf-Adaption to BMS
DC SwitchYes
Grid Frequency Range (50 Hz)45-55 Hz
Grid Frequency Range (60 Hz)55-65 Hz
Grid RegulationNRS 097-2-1, VDE4105, EN50549-1, AS 4777.2, GB/T 34120, GB/T 34133, GB/T 34129
Ground Fault Current MonitoringYes
Input Voltage Range184-264.5 V
MPPT Efficiency99.9 %
MPPT Full-Load Voltage Range289-800 V
MPPT Trackers2
MPPT Voltage Range160-650 V
Max AC Input Current16 A
Max AC Pass-Through Current70 A
Max Apparent Power11 kVA
Max Charging Current210 A
Max Discharging Current210 A
Max Efficiency97.6 %
Max Output Current16 A
Max Output Overcurrent Protection65 A
Max PV Input Current26+26 A
Max PV Input Power15 kW
Max PV Voltage800 V
Max Short-Circuit Current39+39 A
Nominal AC Input Line Voltage380-400 V
Nominal AC Input Voltage220-230 V
Nominal Input Frequency50/60 Hz
Output Frequency50/60 Hz
Output Short-Circuit ProtectionYes
Overload ProtectionYes
Pass-Through Without BatteryYes
PhaseThree Phase
Power Factor Adjustment Range0.8 leading to 0.8 lagging
ProtectionDC Polarity Reverse Connection Protection, AC Output Overcurrent Protection, AC Output Overvoltage Protection, AC Output Short Circuit Protection, Thermal Protection, DC Terminal Insulation Impedance Monitoring, DC Component Monitoring, Ground Fault Current Monitoring, Arc Fault Circuit Interrupter (AFCI), Power Network Monitoring, Island Protection Monitoring, Earth Fault Detection, DC Input Switch, Overvoltage Load Drop Protection, Residual Current (RCD) Detection
Rated Apparent Output Power10 kVA
Rated Output Power10 kW
Rated PV Input Voltage550 V
Start-Up Voltage160 V
Strings per MPPT2+2
Surge Protection Level (AC)II
Surge Rating2*rated (10s)
Total Harmonic Distortion<3 %
Transfer Time20 ms

Mechanical(11)

BMS CommunicationRS485, CAN
Communication InterfaceRS232, RS485
DisplayLCD Touch Screen
Gross Weight60.2 kg
Installation StyleWall-Mounted
Monitoring ModuleWiFi/4G
Net Weight48.7 kg
Package Dimensions889 x 566 x 397 mm
Parallel Capability10
Safety StandardIEC/EN 62109-1, IEC/EN 62109-2
TopologyNon-Isolated

Environmental(4)

CoolingSmart Cooling
IP RatingIP65
Operating Altitude2000 m
Operating Temperature Range-25 to 60 (>45 derating) °C

Certifications(4)

  • IEC 62109-1
  • EN 62109-1
  • IEC 62109-2
  • EN 62109-2

Downloads & support

PDFThe manufacturer's sheet, to print or share

Frequently Asked Questions

What is the Felicity Solar IVGM10KLP3G1?

The IVGM10KLP3G1 is a 10 kW three-phase hybrid solar inverter from Felicity Solar. It delivers 10 kW of rated output power and 10 kVA of rated apparent power, with 11 kVA maximum apparent power and 14.5 A rated output current at a 380-400 V line voltage (220-230 V per phase, 3L+N+PE). Maximum conversion efficiency is 97.6%.

How many solar panels can the IVGM10KLP3G1 take?

The IVGM10KLP3G1 accepts up to 15 kW of PV input across 2 MPPT trackers carrying 2+2 strings. Maximum PV voltage is 800 V, the MPPT range is 160-650 V with a 289-800 V full-load window, rated PV input voltage is 550 V and the unit starts up at 160 V. Maximum PV input current is 26+26 A.

Which batteries work with the IVGM10KLP3G1?

It has 2 battery inputs covering a 40-60 V range and works with lithium-ion or lead-acid banks. Charge and discharge current both reach 210 A, and the charge algorithm self-adapts to the battery BMS over RS485 or CAN. The inverter also passes grid power through to the loads without a battery connected.

What are the dimensions, weight and operating limits of the IVGM10KLP3G1?

The unit measures 750 x 450 x 268 mm and weighs 48.7 kg net; packed it is 889 x 566 x 397 mm at 60.2 kg gross. It is wall-mounted, IP65 rated, operates from -25 °C to 60 °C with derating above 45 °C, and works up to 2000 m altitude. Safety standards are IEC 62109-1, EN 62109-1, IEC 62109-2 and EN 62109-2.

Customer reviews