Felicity Solar T-REX-10KLP3G01 10kW Three-Phase Hybrid Solar Inverter

A 10 kW three-phase hybrid inverter built around two MPPT trackers over a 200-850 V window, 13 kW of recommended PV, 200 A of battery charge and discharge, and a 38.9 kg IP65 wall-mounted chassis.

Rated Output Power: 10 kW
Max Apparent Power: 10 kVA
Max Efficiency: 97.6 %
Battery Voltage Range: 40-60 V

5,500 AEDincl. VAT

In stock

Full Specifications Download datasheet (PDF)

Felicity Solar T-REX-10KLP3G01 10kW Three-Phase Hybrid Solar Inverter features

13 kW of PV across two MPPT trackers

Maximum recommended PV power is 13 kW on a 10 kW inverter, split over two MPPT trackers that accept 15+15 A of input current, 18+18 A of short-circuit current and one string each.

200-850 V MPPT window from a 180 V start-up

Tracking opens at a 180 V start-up voltage, runs from 200 to 850 V, holds full load from 450 to 850 V and works across a 160-900 V range capped by the 900 V maximum PV voltage.

200 A charging and 200 A discharging

Maximum charging current and maximum discharging current are both 200 A into a 40-60 V bank on two battery inputs, with AC charging also at 200 A and Lead-Acid and Li-Ion supported by a charge algorithm that self-adapts to the BMS.

10 kVA three-phase output at 400 V line

Maximum apparent power is 10 kVA at 230 V per phase and 400 V line voltage on 3L+N+PE wiring, rated at 14.5 A, peaking at 18 A, with a surge of twice rated power for 10 s and a 0.8 leading to 0.8 lagging power factor range.

97.6% efficiency and a 20 ms transfer

Maximum efficiency is 97.6%, European efficiency 97% and MPPT efficiency 99.9%, and backup takes over in 20 ms at up to 30 A behind anti-islanding protection, GFCI protection, insulation resistor detection and a DC switch.

38.9 kg IP65 chassis, 10 units in parallel

The wall-mounted IP65 chassis measures 655 x 475 x 266 mm and weighs 38.9 kg net and 47.1 kg gross, works from -25 to 60 °C with derating above 45 °C, and parallels up to 10 units. Supplied with a 2 Years warranty.

About the Felicity Solar T-REX-10KLP3G01 10kW Three-Phase Hybrid Solar Inverter

The Felicity Solar T-REX-10KLP3G01 is a 10 kW three-phase hybrid solar inverter that accepts up to 13 kW of PV across two MPPT trackers, charges and discharges a 40-60 V battery bank at 200 A, and delivers 10 kVA of maximum apparent power at 230 V per phase with a 97.6% maximum efficiency. Each tracker carries one string from a 180 V start-up across a 200-850 V window, holds full load from 450 to 850 V and takes 15+15 A up to the 900 V maximum PV voltage. AC output is 230 V per phase and 400 V line on 3L+N+PE wiring, rated at 14.5 A, peaking at 18 A and 30 A in backup, with under 3% THD and a 20 ms transfer time. Two battery inputs take Lead-Acid and Li-Ion, self-adapting to the BMS over RS485 and CAN, and AC charging also reaches 200 A. European efficiency is 97% and MPPT efficiency 99.9%. The wall-mounted IP65 chassis measures 655 x 475 x 266 mm, weighs 38.9 kg net, runs from -25 to 60 °C and parallels up to 10 units. We are the authorised Felicity Solar distributor and supply it with a 2 Years warranty.

Specifications last updated 23 July 2026

Felicity Solar T-REX-10KLP3G01 10kW Three-Phase Hybrid Solar Inverter full specifications

Electrical

AC Output Line Voltage	400 V
AC Output Voltage	230 V
AC Rated Output Current	14.5 A
AC Wiring Mode	3L+N+PE
Backup Max Output Current	30 A
Backup Rated Output Power	10 kW
Battery Inputs	2
Battery Type	Lead-Acid, Li-Ion
Battery Voltage Range	40-60 V
Charge Algorithm	Self-Adaption to BMS
DC Switch	Yes
European Efficiency	97 %
Grid Frequency Range (50 Hz)	45-55 Hz
Grid Frequency Range (60 Hz)	55-65 Hz
Grid Regulation	VDE-AR-N 4105, G99/1, EN50549-1, CEI 0-21, AS 4777.2, NRS 097-2-1
Ground Fault Current Monitoring	Yes
Input Voltage Range	184-264.5 V
MPPT Efficiency	99.9 %
MPPT Full-Load Voltage Range	450-850 V
MPPT Trackers	2
MPPT Voltage Range	200-850 V
Max AC Charge Current	200 A
Max AC Input Current	30 A
Max AC Output Power	10 kW
Max AC Pass-Through Current	30 A
Max Apparent Power	10 kVA
Max Charge/Discharge Power	10 kW
Max Charging Current	200 A
Max Discharging Current	200 A
Max Efficiency	97.6 %
Max Output Current	18 A
Max PV Input Current	15+15 A
Max PV Voltage	900 V
Max Recommended PV Power	13 kW
Max Short-Circuit Current	18+18 A
Nominal AC Input Line Voltage	400 V
Nominal AC Input Voltage	230 V
Nominal Input Frequency	50/60 Hz
Output Frequency	50/60 Hz
Output Short-Circuit Protection	Yes
Overload Protection	Yes
Overvoltage Category (AC)	III
Overvoltage Category (DC)	II
PV Working Voltage Range	160-900 V
Pass-Through Without Battery	Yes
Phase	Three Phase
Power Factor	>0.99
Power Factor Adjustment Range	0.8 leading to 0.8 lagging
Protection	Output Over Current Protection, Output Over Power Protection, Output Short-Circuit Protection, Anti-islanding Protection, GFCI Protection, Insulation Resistor Detection
Rated Apparent Output Power	10 kVA
Rated Output Power	10 kW
Rated PV Input Voltage	720 V
Start-Up Voltage	180 V
Strings per MPPT	1
Surge Protection Level (AC)	II
Surge Rating	2*rated (10s)
Total Harmonic Distortion	<3 %
Transfer Time	20 ms

Mechanical

BMS Communication	RS485, CAN
Communication Interface	RS232, RS485
Display	LCD, LED
Gross Weight	47.1 kg
Installation Style	Wall-Mounted
Monitoring Module	WiFi/GPRS
Net Weight	38.9 kg
Package Dimensions	792 x 597 x 351 mm
Parallel Capability	10
Safety Standard	IEC 62109-1, IEC 62109-2, IEC 62040-1
Topology	Non-Isolated

Environmental

Cooling	Smart Cooling
IP Rating	IP65
Operating Altitude	2000 m
Operating Temperature Range	-25 to 60 (>45 derating) °C
Relative Humidity	0-100 %

Certifications

IEC 62109-1
IEC 62109-2
IEC 62040-1

Frequently Asked Questions

13 kW is the maximum recommended PV power, spread over two MPPT trackers that take 15+15 A of input current and 18+18 A of short-circuit current, one string each. The PV working range is 160-900 V, tracking runs from 200 to 850 V, full load from 450 to 850 V, rated PV input voltage is 720 V and the unit starts at 180 V.

200 A is both the maximum charging current and the maximum discharging current, into a 40-60 V bank across two battery inputs, for a maximum charge and discharge power of 10 kW. AC charging also reaches 200 A, the charge algorithm self-adapts to the BMS over RS485 and CAN, and Lead-Acid and Li-Ion are both supported.

10 kW rated output power and 10 kVA maximum apparent power, three-phase at 230 V per phase and 400 V line on 3L+N+PE wiring. Rated current is 14.5 A, maximum output current 18 A and backup current 30 A, with twice rated power for 10 s of surge, THD below 3%, a power factor above 0.99 adjustable from 0.8 leading to 0.8 lagging, and a 20 ms transfer time. On the AC input it accepts 184-264.5 V at up to 30 A, passes through even without a battery, runs at 50/60 Hz across 45-55 Hz and 55-65 Hz grid windows, and is set for the VDE-AR-N 4105, EN50549-1, CEI 0-21, AS 4777.2 and NRS 097-2-1 grid codes. It is certified to IEC 62109-1, IEC 62109-2 and IEC 62040-1.

IP65 is the enclosure rating, so the wall-mounted 655 x 475 x 266 mm chassis works outdoors from -25 to 60 °C with derating above 45 °C, in 0-100% relative humidity and up to 2000 m of altitude, cooled by smart cooling. It weighs 38.9 kg net and 47.1 kg gross, ships in a 792 x 597 x 351 mm package, and up to 10 units can be paralleled. The non-isolated unit carries an LCD and LED display, RS232 and RS485 interfaces, a WiFi or GPRS monitoring module, overvoltage category III on AC and II on DC, and surge protection level II.

Troubleshooting & error codes

Looking up an error code on this FelicityESS T-REX-10KLP3G01? Browse the full list of codes for this device, with the cause and recommended fix for each.

View error codes for this device →