Felicity Solar Hybrid Inverters 10 kW T-REX-10KLP3G01
A 10 kW three-phase hybrid inverter built around two MPPT trackers over a 200-850 V window, 13 kW of recommended PV, 200 A of battery charge and discharge, and a 38.9 kg IP65 wall-mounted chassis.
Models and prices
- T-REX-10KLP3G01AED 5,500incl. VAT
Technical Specifications
| Parameter | T-REX-10KLP3G01 |
|---|---|
| Performance & Electrical | |
| AC Output Line Voltage | 400 V |
| AC Output Voltage | 230 V |
| AC Rated Output Current | 14.5 A |
| AC Wiring Mode | 3L+N+PE |
| Backup Max Output Current | 30 A |
| Backup Rated Output Power | 10 kW |
| Battery Inputs | 2 |
| Battery Type | Lead-Acid, Li-Ion |
| Battery Voltage Range | 40-60 V |
| Charge Algorithm | Self-Adaption to BMS |
| DC Switch | Yes |
| European Efficiency | 97% |
| Grid Frequency Range (50 Hz) | 45-55 Hz |
| Grid Frequency Range (60 Hz) | 55-65 Hz |
| Grid Regulation | VDE-AR-N 4105, G99/1, EN50549-1, CEI 0-21, AS 4777.2, NRS 097-2-1 |
| Ground Fault Current Monitoring | Yes |
| Input Voltage Range | 184-264.5 V |
| MPPT Efficiency | 99.9% |
| MPPT Full-Load Voltage Range | 450-850 V |
| MPPT Trackers | 2 |
| MPPT Voltage Range | 200-850 V |
| Max AC Charge Current | 200 A |
| Max AC Input Current | 30 A |
| Max AC Output Power | 10 kW |
| Max AC Pass-Through Current | 30 A |
| Max Apparent Power | 10 kVA |
| Max Charge/Discharge Power | 10 kW |
| Max Charging Current | 200 A |
| Max Discharging Current | 200 A |
| Max Efficiency | 97.6% |
| Max Output Current | 18 A |
| Max PV Input Current | 15+15 A |
| Max PV Voltage | 900 V |
| Max Recommended PV Power | 13 kW |
| Max Short-Circuit Current | 18+18 A |
| Nominal AC Input Line Voltage | 400 V |
| Nominal AC Input Voltage | 230 V |
| Nominal Input Frequency | 50/60 Hz |
| Output Frequency | 50/60 Hz |
| Output Short-Circuit Protection | Yes |
| Overload Protection | Yes |
| Overvoltage Category (AC) | III |
| Overvoltage Category (DC) | II |
| PV Working Voltage Range | 160-900 V |
| Pass-Through Without Battery | Yes |
| Phase | Three Phase |
| Power Factor | >0.99 |
| Power Factor Adjustment Range | 0.8 leading to 0.8 lagging |
| Protection | Output Over Current Protection, Output Over Power Protection, Output Short-Circuit Protection, Anti-islanding Protection, GFCI Protection, Insulation Resistor Detection |
| Rated Apparent Output Power | 10 kVA |
| Rated Output Power | 10 kW |
| Rated PV Input Voltage | 720 V |
| Start-Up Voltage | 180 V |
| Strings per MPPT | 1 |
| Surge Protection Level (AC) | II |
| Surge Protection Level (DC) | II |
| Surge Rating | 2*rated (10s) |
| Total Harmonic Distortion | <3% |
| Transfer Time | 20 ms |
| Build & Interfaces | |
| BMS Communication | RS485, CAN |
| Communication Interface | RS232, RS485 |
| Display | LCD, LED |
| Gross Weight | 47.1 kg |
| Installation Style | Wall-Mounted |
| Monitoring Module | WiFi/GPRS |
| Net Weight | 38.9 kg |
| Package Dimensions | 792 x 597 x 351 mm |
| Parallel Capability | 10 |
| Safety Standard | IEC 62109-1, IEC 62109-2, IEC 62040-1 |
| Topology | Non-Isolated |
| Operating Environment | |
| Cooling | Smart Cooling |
| IP Rating | IP65 |
| Operating Altitude | 2000 m |
| Operating Temperature Range | -25 to 60 (>45 derating) °C |
| Relative Humidity | 0-100% |
Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.
Availability & grid compliance in the UAE
| Market | UAE |
|---|---|
| Grid authority / regulator | DEWA, ADDC, SEWA |
| Quotation currency | AED |
| Support hours timezone | Asia/Dubai |
| Main cities | Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in the UAE that rests with the local authorities (DEWA, ADDC, SEWA). Confirm the grid code, import requirements and any local certification with them, or with us, before you order.
Key Features & Technical Highlights
- 13 kW of PV across two MPPT trackers: Maximum recommended PV power is 13 kW on a 10 kW inverter, split over two MPPT trackers that accept 15+15 A of input current, 18+18 A of short-circuit current and one string each.
- 200-850 V MPPT window from a 180 V start-up: Tracking opens at a 180 V start-up voltage, runs from 200 to 850 V, holds full load from 450 to 850 V and works across a 160-900 V range capped by the 900 V maximum PV voltage.
- 200 A charging and 200 A discharging: Maximum charging current and maximum discharging current are both 200 A into a 40-60 V bank on two battery inputs, with AC charging also at 200 A and Lead-Acid and Li-Ion supported by a charge algorithm that self-adapts to the BMS.
- 10 kVA three-phase output at 400 V line: Maximum apparent power is 10 kVA at 230 V per phase and 400 V line voltage on 3L+N+PE wiring, rated at 14.5 A, peaking at 18 A, with a surge of twice rated power for 10 s and a 0.8 leading to 0.8 lagging power factor range.
- 97.6% efficiency and a 20 ms transfer: Maximum efficiency is 97.6%, European efficiency 97% and MPPT efficiency 99.9%, and backup takes over in 20 ms at up to 30 A behind anti-islanding protection, GFCI protection, insulation resistor detection and a DC switch.
- 38.9 kg IP65 chassis, 10 units in parallel: The wall-mounted IP65 chassis measures 655 x 475 x 266 mm and weighs 38.9 kg net and 47.1 kg gross, works from -25 to 60 °C with derating above 45 °C, and parallels up to 10 units. Supplied with a 2 Years warranty.
Frequently Asked Questions
How much PV can the T-REX-10KLP3G01 accept?
13 kW is the maximum recommended PV power, spread over two MPPT trackers that take 15+15 A of input current and 18+18 A of short-circuit current, one string each. The PV working range is 160-900 V, tracking runs from 200 to 850 V, full load from 450 to 850 V, rated PV input voltage is 720 V and the unit starts at 180 V.
How fast does the T-REX-10KLP3G01 charge and discharge a battery?
200 A is both the maximum charging current and the maximum discharging current, into a 40-60 V bank across two battery inputs, for a maximum charge and discharge power of 10 kW. AC charging also reaches 200 A, the charge algorithm self-adapts to the BMS over RS485 and CAN, and Lead-Acid and Li-Ion are both supported.
What does the T-REX-10KLP3G01 deliver on the AC side?
10 kW rated output power and 10 kVA maximum apparent power, three-phase at 230 V per phase and 400 V line on 3L+N+PE wiring. Rated current is 14.5 A, maximum output current 18 A and backup current 30 A, with twice rated power for 10 s of surge, THD below 3%, a power factor above 0.99 adjustable from 0.8 leading to 0.8 lagging, and a 20 ms transfer time. On the AC input it accepts 184-264.5 V at up to 30 A, passes through even without a battery, runs at 50/60 Hz across 45-55 Hz and 55-65 Hz grid windows, and is set for the VDE-AR-N 4105, EN50549-1, CEI 0-21, AS 4777.2 and NRS 097-2-1 grid codes. It is certified to IEC 62109-1, IEC 62109-2 and IEC 62040-1.
Where can the T-REX-10KLP3G01 be installed?
IP65 is the enclosure rating, so the wall-mounted 655 x 475 x 266 mm chassis works outdoors from -25 to 60 °C with derating above 45 °C, in 0-100% relative humidity and up to 2000 m of altitude, cooled by smart cooling. It weighs 38.9 kg net and 47.1 kg gross, ships in a 792 x 597 x 351 mm package, and up to 10 units can be paralleled. The non-isolated unit carries an LCD and LED display, RS232 and RS485 interfaces, a WiFi or GPRS monitoring module, overvoltage category III on AC and II on DC, and surge protection level II.