45 A of charge current
the SCCM4548-II ceiling into a bank it reads for itself as 12V, 24V or 48V

Charge ControllersModel SCCM4548-II
A 2.99 kg wall box measuring 308 x 212 x 125 mm, the SCCM4548-II drives an array of up to 145 V from a 15V start and feeds its bank at 45 A.
In stock
the SCCM4548-II ceiling into a bank it reads for itself as 12V, 24V or 48V
tracking that gets going from a 15V PV start-up voltage
1250 W behind 24 V and 625 W behind 12 V, at 98% peak efficiency
inside 30-130 VDC at 24 VDC and inside 15-130 VDC at 12 VDC
over a 3-Step charge corrected by -5 mV/°C/cell @ 25°C ref
an IP20 (Indoor & Vented) wall box holding an LCD (built-in), CAN, RS485 and WiFi
The Felicity Solar SCCM4548-II is a 45 A MPPT solar charge controller that takes up to 145 V of array, 2500 W of it behind a 48 V bank, 1250 W behind 24 V or 625 W behind 12 V, and pours the result into a battery whose nominal 12V, 24V or 48V it reads for itself, at 98% peak efficiency. Array sizing is where that 45 A rating shows: it is the number that pins the PV ceiling at 2500 W for a 48 V bank. Tracking stays inside 60-130 VDC behind a 48 V bank, 30-130 VDC behind 24 V and 15-130 VDC behind 12 V, and gets going from 15V. A 3-Step algorithm runs the charge, corrected by -5 mV/°C/cell @ 25°C ref across 0 °C to +50 °C. Terminals take 4500 Watts / port of transient surge protection, an LCD (built-in) shows the state and CAN, RS485 and WiFi carry it. The case is 308 x 212 x 125 mm and 2.99 kg, rated IP20 (Indoor & Vented) for an indoor wall, running 0°C to 55°C. We are an authorised Felicity Solar distributor; the SCCM4548-II is covered for 2 Years.
Specifications last updated 23 March 2026
| Maximum Solar Input Voltage | 145V |
|---|---|
| Maximum Charge Current | 45 A |
| Nominal System Voltage | 12V/24V/48V (Auto) |
| PV Array MPPT Voltage Range | 12 VDC: 15-130 VDC / 24 VDC: 30-130 VDC / 48 VDC: 60-130 VDC |
| Maximum Input Power | 12V - 625W / 24V - 1250W / 48V - 2500W |
| PV Start-up Voltage | 15V |
| Charging Algorithm | 3-Step |
| Charging Stages | Bulk, Absorption, Float |
|---|---|
| Temperature Compensation Coefficient | -5 mV/°C/cell @ 25°C ref |
| Communication | CAN (parallel), RS485 (BMS), WiFi (built-in) |
| Maximum Efficiency | 98 % |
| Transient Surge Protection | 4500 Watts / port |
| Maximum PV Input Voltage | 100V |
| Product Size (W x H x D,mm) | 308x212x125 mm |
|---|---|
| Display | LCD (built-in) |
| Installation | Indoor wall-mount |
| Humidity | 0%-90%RH(No condensing) |
|---|---|
| Storage Temperature | - 25°C to 75°C |
| Temperature compensation range | 0 °C to +50 °C |
| Ambient Temperature Range | 0°C to +55°C |
| Enclosure Rating | IP20 (Indoor & Vented) |
| Warranty | 2 Years |
| Operating Temperature | 0°C to 55°C |
45 A. That is the SCCM4548-II ceiling, delivered into a bank it reads for itself as 12V, 24V or 48V, at 98% peak efficiency.
2500 W behind a 48 V bank, 1250 W behind 24 V or 625 W behind 12 V. Keep the array below the 145 V the SCCM4548-II accepts at its PV input.
15V. From that PV start-up voltage the SCCM4548-II works inside 60-130 VDC behind a 48 V bank, 30-130 VDC behind 24 V and 15-130 VDC behind 12 V, on a 3-Step charge.
2.99 kg, in a 308 x 212 x 125 mm case rated IP20 (Indoor & Vented) for an indoor wall, running 0°C to 55°C at 0%-90%RH (No condensing). We are an authorised Felicity Solar distributor; it is covered for 2 Years.