What does error 70 mean on a Felicity inverter?

It depends on the model — 2 devices use code 70. On the IVGM5KL-P1G1 it means: AC leakage current sensor fault. The card for each model on this page gives its exact meaning and fix.

How do I clear or fix error 70?

1. Restart the system 2~3 times; 2. The exact steps for each affected model are listed on this page.

Felicity inverter error 70 (F70)

AC leakage current sensor fault

Also displayed as F70 on some models.

Fault — the inverter cuts its output and the red LED stays solid until the fault is cleared.

The exact meaning depends on your model:

IVGM5KL-P1G1

InverterFault

Also applies to:IVGM6KL-P1G1IVGM7K6L-P1G1IVGM8KL-P1G1

What it means

AC leakage current sensor fault

Cause: The sensor that monitors AC leakage (residual) current returned an implausible reading, so the inverter can no longer verify that its leakage protection is working.

How to fix it

Restart the system 2~3 times
If the fault still exists, please contact us for help.

Source: Felicitysolar IVGM Series Hybrid inverter Instruction Manual.pdf, p.55

T-REX-50KHP3G01

InverterFault

What it means

Internal fan fault — Internal fan is faulty, check internal fan for is normal.

Cause: Internal cooling fan failure detected. Often caused by dust buildup, bearing wear, or debris fouling the fan blades.

How to fix it

Power down the inverter and remove the cover (only if the unit is field-serviceable per the manual).
Inspect the fan for debris and clean.
If the fan does not spin freely or is noisy, replace it with the manufacturer's OEM part.

Source: T-REX-50KHP3G01-user-manual-.pdf, p.48

Frequently asked questions

What does error 70 mean on a Felicity inverter?: It depends on the model — 2 devices use code 70. On the IVGM5KL-P1G1 it means: AC leakage current sensor fault. The card for each model on this page gives its exact meaning and fix.
Is error 70 a fault or a warning?: 70 is a fault code: the inverter cuts its output and the red LED stays solid until it is cleared.
How do I clear or fix error 70?: 1. Restart the system 2~3 times; 2. The exact steps for each affected model are listed on this page.

Related error codes

Other codes on the IVGM5KL-P1G1

All IVGM5KL-P1G1 codes

Other codes on the T-REX-50KHP3G01

All T-REX-50KHP3G01 codes

Prefer the full written guide? Read the complete Felicity inverter error-code guide

Compiled from official Felicity user manuals. Always consult your device manual and a qualified technician before performing repairs.