
InvertersModel IVEM5048-SALV
Felicity Solar IVEM5048-SALV 5kW Single-Phase Off-Grid Solar Inverter
A 5 kW single-phase off-grid solar inverter built around a 127 V, 60 Hz output rated 50 A, with a single MPPT accepting 6 kW of PV and 100 A charging for a 48 V bank.
- Rated Output Power: 5 kW
- Max Efficiency: 93 %
- Max PV Input Power: 6 kW
- Battery Voltage Range: 42-63 V
In stock
- Delivered within 3 business days, door to door, to every market we serve.
- Dispatched the same business day for an order placed before 21:00 (Dubai time), or the next business day after.
- Delivery charge: AED 90
- 2-year warranty
Felicity Solar IVEM5048-SALV 5kW Single-Phase Off-Grid Solar Inverter features
5 kW rated output power, 5 kVA apparent, with a surge rating of 2x rated power for 5 s for motor starting.
One MPPT tracker accepting 6 kW of PV at up to 20 A and 500 V, over a 120-450 V working range.
Charges a 48 V bank at up to 100 A across a 42-63 V range, 56.4 V boost and 54 V float, for AGM, Flooded, Li-Ion and Self-Defined types.
93% maximum efficiency in inverter mode and above 95% in line mode, with a 50 ms transfer time.
14.9 kg net and 17.3 kg gross, wall-mounted and IP21, with an LCD, built-in WiFi, RS485 to the BMS and up to 6 units in parallel.
About the Felicity Solar IVEM5048-SALV 5kW Single-Phase Off-Grid Solar Inverter
The Felicity Solar IVEM5048-SALV is a 5 kW single-phase off-grid solar inverter that outputs 127 V at 60 Hz and up to 50 A. One MPPT tracker accepts 6 kW of PV inside a 120-450 V working window, and the unit charges a 48 V battery bank at up to 100 A from solar or from the mains. The IVEM5048-SALV holds that 127 V output within 5% regulation as a pure sine wave, and its surge rating of 2x rated power for 5 s starts motor loads such as pumps and compressors. On mains it passes through and charges across a 65-140 V input, 90-140 V in UPS mode, and returns to battery in 50 ms. Line-mode efficiency is above 95%, while inverter-mode efficiency peaks at 93%. At 14.9 kg net and 17.3 kg gross the wall-mounted IVEM5048-SALV is rated IP21, uses intelligent air cooling and runs from -10 to 50 C. An LCD, built-in WiFi and RS485 to the battery BMS report status, and up to 6 units run in parallel. Certified to IEC 62109-1 and IEC 62109-2. We are an authorised Felicity Solar distributor and supply the IVEM5048-SALV from our own stock.
Specifications last updated 17 August 2026
Felicity Solar IVEM5048-SALV 5kW Single-Phase Off-Grid Solar Inverter full specifications
Electrical(68)
| AC Output Voltage | 127 V |
|---|---|
| AC Wiring Mode | L+N+PE |
| Backup Rated Output Power | 5 kW |
| Battery Inputs | 1 |
| Battery Type | AGM, Flooded, Li-Ion, Self-Defined |
| Battery Voltage Range | 42-63 V |
| Bulk Charging Voltage | 56.4 V |
| Charge Algorithm | Three-Stage: Boost CC, Boost CV, Float |
| Float Charging Voltage | 54 V |
| High DC Input Recovery Voltage | 56.4 V |
| High Frequency Disconnect | 65 Hz |
| High Frequency Reconnect | 63 Hz |
| High Line Disconnect Voltage | 140 V |
| High Line Reconnect Voltage | 135 V |
| Input Voltage Range | 65-140 V |
| Input Voltage Range (UPS Mode) | 90-140 V |
| Input Voltage Waveform | Sinusoidal (utility or generator) |
| Line Mode Efficiency | >95 % |
| Line Mode Output Waveform | Same As Input Waveform |
| Low DC Shutdown (<50% Load) | 43 V |
| Low DC Shutdown (>50% Load) | 42 V |
| Low Frequency Disconnect | 47 Hz |
| Low Frequency Reconnect | 49 Hz |
| Low Line Disconnect (Appliance Mode) | 65 V |
| Low Line Disconnect (UPS Mode) | 90 V |
| Low Line Reconnect (Appliance Mode) | 70 V |
| Low Line Reconnect (UPS Mode) | 95 V |
| Low-Battery Recovery (<50% Load) | 47 V |
| Low-Battery Recovery (>50% Load) | 46 V |
| MPPT Trackers | 1 |
| MPPT Voltage Range | 120-450 V |
| Max AC Charge Current | 100 A |
| Max AC Input Voltage | 140 V |
| Max AC Pass-Through Current | 63 A |
| Max Charging Current | 100 A |
|---|---|
| Max Charging Voltage | 60 V |
| Max Efficiency | 93 % |
| Max Inverter/Rectifier Current | 50 A |
| Max Output Current | 50 A |
| Max PV Input Current | 20 A |
| Max PV Input Power | 6 kW |
| Max PV Voltage | 500 V |
| Max Solar Charging Current | 100 A |
| Motor Start Capable | Yes |
| Nominal AC Input Voltage | 127 V |
| Nominal DC Input Voltage | 48 V |
| Nominal Input Frequency | 60 Hz |
| Output Frequency | 60 Hz |
| Output Short-Circuit Protection | Yes |
| Output Voltage Regulation | 5 % |
| Output Voltage Waveform | Pure Sine Wave |
| Overload Protection | Yes |
| Overload Trip Time (>105% Load) | 10.5 s |
| Overload Trip Time (>150% Load) | 5.5 s |
| PV Working Voltage Range | 120-450 V |
| Pass-Through Without Battery | Yes |
| Phase | Single Phase |
| Protection | Overload Protection, Over Temperature Protection, Short Circuit Protection |
| Rated Apparent Output Power | 5 kVA |
| Rated Output Power | 5 kW |
| Short-Circuit Protection (Battery Mode) | Electronic Circuit |
| Short-Circuit Protection (Line Mode) | Circuit Breaker |
| Start-Up Voltage | 100 V |
| Strings per MPPT | 1 |
| Surge Rating | 2*rated (5s) |
| Transfer Time | 50 ms |
| Transfer Time (Appliance Mode) | 20 ms |
| Transfer Time (UPS Mode) | 10 ms |
Mechanical(10)
| BMS Communication | RS485 |
|---|---|
| Display | LCD |
| Gross Weight | 17.3 kg |
| Installation Style | Wall-Mounted |
| Monitoring Module | Built-In WiFi |
| Net Weight | 14.9 kg |
| Package Dimensions | 589 x 443 x 231 mm |
| Parallel Capability | 6 |
| Safety Standard | IEC 62109-1, IEC 62109-2 |
| Topology | High-Frequency |
Environmental(4)
| Cooling | Intelligent Air Cooling |
|---|---|
| IP Rating | IP21 |
| Operating Temperature Range | -10 to 50 °C |
| Storage Temperature | -15 to 60 °C |
Certifications(2)
- IEC 62109-1
- IEC 62109-2
Downloads & support
Frequently Asked Questions
What voltage and frequency does the IVEM5048-SALV output?
127 V at 60 Hz, single phase, on an L+N+PE connection, as a pure sine wave held within 5% regulation and rated up to 50 A of output current. The AC input window is 65-140 V, or 90-140 V in UPS mode.
How much solar can I connect to the IVEM5048-SALV?
6 kW of PV on a single MPPT tracker, with up to 20 A of input current and 500 V maximum PV voltage, a 120-450 V working range and a 100 V start-up voltage.
Which batteries does the IVEM5048-SALV charge, and how fast?
48 V banks across a 42-63 V range, at up to 100 A from solar or from AC, with 56.4 V boost, 54 V float and 60 V maximum charging voltage. AGM, Flooded, Li-Ion and Self-Defined types are supported, with RS485 to the battery BMS.
How heavy is the IVEM5048-SALV and what warranty does it carry?
14.9 kg net and 17.3 kg gross, shipped in a 589 x 443 x 231 mm carton. The wall-mounted unit is rated IP21, runs from -10 to 50 C, and carries a 2 Years warranty.






