Felicity Solar T-REX-30KHP3G01

InvertersModel T-REX-30KHP3G01

Felicity Solar T-REX-30KHP3G01 30kW Three-Phase Hybrid Solar Inverter

The T-REX-30KHP3G01 is a three-phase hybrid inverter rated 30 kVA and oversized on the DC side: 39 kW of PV across three MPPTs, 33 kW of peak AC output and 47.9 A of maximum output current.

  • Rated Output Power: 30 kW
  • Max Efficiency: 97.6 %
  • Max PV Input Power: 39 kW
  • Battery Voltage Range: 160-800 V

Models in the T-REX-10KHP3G01 – T-REX-50KHP3G01 family

What sets the T-REX-30KHP3G01 apart from the other 5 models in the family: AC Output Line Voltage 380-400 V; AC Output Voltage 220-230 V; AC Rated Output Current 43.5 A; AC Wiring Mode 3L+N+PE; Backup Rated Output Power 30 kW; Battery Inputs 2; Battery Type LFP; Battery Voltage Range 160-800 V.

AED 13,750incl. VAT

In stock

  • Delivered within 3 business days, door to door, to every market we serve.
  • Dispatched the same business day for an order placed before 21:00 (Dubai time), or the next business day after.
  • Delivery charge: free
  • 2-year warranty
Full SpecificationsDownload datasheet (PDF)

Felicity Solar T-REX-30KHP3G01 30kW Three-Phase Hybrid Solar Inverter features

  • 39 kW of PV input across 3 MPPTs

    Three trackers accept 36+36+36 A of string current inside a 200-850 V window, under a 1000 V maximum PV voltage.

  • 33 kW peak AC output from a 30 kVA rating

    Maximum output current is 47.9 A per phase, with 1.5x rated power for 10 s of surge headroom and 144 A overcurrent protection.

  • Two battery inputs at 50+50 A charge and discharge

    Supports LFP packs from 160 to 800 V, communicating with the pack BMS over RS485 and CAN.

  • 97.6% maximum conversion efficiency

    European efficiency is 97% and MPPT tracking efficiency reaches 99.9%, from a 250 V start-up voltage.

  • 10 ms transfer time on 30 kW of backup output

    Three-phase 220-230 V at 50/60 Hz on a 3L+N+PE connection, THD under 3%, with anti-islanding and residual current monitoring.

  • IP65 enclosure rated -25 to 60 °C

    Smart cooling, wall-mounted at 85.6 kg net, monitored over WiFi/GPRS, and parallelable to 12 units.

About the Felicity Solar T-REX-30KHP3G01 30kW Three-Phase Hybrid Solar Inverter

The Felicity Solar T-REX-30KHP3G01 is a three-phase hybrid solar inverter rated 30 kVA, with 30 kW of backup output. It accepts up to 39 kW of PV across 3 MPPTs, peaks at 33 kW of AC output and 47.9 A, converts at up to 97.6%, and drives LFP batteries anywhere from 160 to 800 V. Two battery inputs charge and discharge at 50+50 A and talk to the pack BMS over RS485 and CAN. The tracking window runs 200-850 V on 36+36+36 A of string current under a 1000 V ceiling, from a 600 V nominal input and a 250 V start-up, with 150 V minimum DC input. Output is 220-230 V on a 3L+N+PE connection at 50/60 Hz, THD under 3%, 10 ms transfer time and 144 A output overcurrent protection. The IP65 wall-mounted enclosure uses smart cooling, weighs 85.6 kg net, runs from -25 to 60 °C, reports over WiFi/GPRS and an LCD touch screen, and parallels to 12 units. We are an authorised Felicity Solar distributor and supply the T-REX-30KHP3G01 from our own stock.

Specifications last updated 23 July 2026

Felicity Solar T-REX-30KHP3G01 30kW Three-Phase Hybrid Solar Inverter full specifications

Electrical(51)

AC Output Line Voltage380-400 V
AC Output Voltage220-230 V
AC Rated Output Current43.5 A
AC Wiring Mode3L+N+PE
Backup Rated Output Power30 kW
Battery Inputs2
Battery TypeLFP
Battery Voltage Range160-800 V
Charge AlgorithmSelf-Adaption to BMS
European Efficiency97 %
Grid Frequency Range (50 Hz)45-55 Hz
Grid Frequency Range (60 Hz)55-65 Hz
Grid RegulationNTS & UNE217001 & UNE217002, CEI 0-21, NRS 097-2-1, NC RFG (Poland), VDE 4105, G99, EN 50549-1, EN 50549-1+Netherlands
Ground Fault Current MonitoringYes
Input Voltage Range184-264.5 V
MPPT Efficiency99.9 %
MPPT Full-Load Voltage Range360-850 V
MPPT Trackers3
MPPT Voltage Range200-850 V
Max AC Output Power33 kW
Max AC Pass-Through Current200 A
Max Charging Current50+50 A
Max Discharging Current50+50 A
Max Efficiency97.6 %
Max Output Current47.9 A
Max Output Overcurrent Protection144 A
Max PV Input Current36+36+36 A
Max PV Input Power39 kW
Max PV Voltage1000 V
Max Short-Circuit Current55+55+55 A
Min DC Input Voltage150 V
Nominal AC Input Line Voltage380-400 V
Nominal AC Input Voltage220-230 V
Nominal Input Frequency50/60 Hz
Output Frequency50/60 Hz
Output Short-Circuit ProtectionYes
Overload ProtectionYes
Overvoltage Category (AC)III
Overvoltage Category (DC)II
PhaseThree Phase
Power Factor Adjustment Range0.8 leading to 0.8 lagging
ProtectionPV Input Lightning Protection, PV String Input Reverse Polarity Protection, Battery Input Lightning Protection, AC Output Lightning Protection, Battery Input Reverse Polarity Protection, Insulation Resistor Detection, Residual Current Monitoring Unit, Output Over Current Protection, Output Short-Circuit Protection, Output Over Voltage Protection, Anti-islanding Protection
Rated Apparent Output Power30 kVA
Rated Output Power30 kW
Rated PV Input Voltage600 V
Start-Up Voltage250 V
Strings per MPPT2
Surge Protection Level (AC)II
Surge Rating1.5*rated (10s)
Total Harmonic Distortion<3 %
Transfer Time10 ms

Mechanical(11)

BMS CommunicationRS485, CAN
Communication InterfaceRS232, RS485
DisplayLCD Touch Screen
Gross Weight102.3 kg
Installation StyleWall-Mounted
Monitoring ModuleWiFi/GPRS
Net Weight85.6 kg
Package Dimensions1114 x 774 x 469 mm
Parallel Capability12
Safety StandardEN 62477-1, IEC 62109-1, IEC 62109-2
TopologyNon-Isolated

Environmental(5)

CoolingSmart Cooling
IP RatingIP65
Operating Altitude3000 (>2000 derating) m
Operating Temperature Range-25 to 60 (>50 derating) °C
Relative Humidity0-95 (non-condensing) %

Certifications(3)

  • EN 62477-1
  • IEC 62109-1
  • IEC 62109-2

Downloads & support

PDFThe manufacturer's sheet, to print or share

Frequently Asked Questions

How much solar can the T-REX-30KHP3G01 take?

39 kW of PV input, spread over 3 MPPTs that accept 36+36+36 A of string current. The tracking window is 200-850 V under a 1000 V maximum PV voltage, with a 600 V nominal PV input, a 250 V start-up voltage and a 150 V minimum DC input voltage.

What battery does the T-REX-30KHP3G01 work with?

160-800 V LFP batteries, across 2 battery inputs. Each pair charges and discharges at 50+50 A, and the inverter communicates with the pack BMS over RS485 and CAN, with RS232 and RS485 available as the service interface.

What is the output rating of the T-REX-30KHP3G01?

30 kVA rated apparent power and 30 kW of backup output, peaking at 33 kW AC and 47.9 A. Output is three-phase 220-230 V on a 3L+N+PE connection at 50/60 Hz, THD under 3%, with 1.5x rated power for 10 s of surge, a 10 ms transfer time and a power factor adjustable from 0.8 leading to 0.8 lagging.

Where can the T-REX-30KHP3G01 be installed and what warranty does it carry?

-25 to 60 °C, derating above 50 °C, and up to 3000 m altitude with derating above 2000 m, in 0-95% non-condensing humidity. The IP65 wall-mounted enclosure weighs 85.6 kg net and 102.3 kg gross, is certified to EN 62477-1, IEC 62109-1 and IEC 62109-2, and carries a 2 Years warranty.

Customer reviews