Felicity Solar T-REX-10KHP3G01

InvertersModel T-REX-10KHP3G01

Felicity Solar T-REX-10KHP3G01 10kW Three-Phase Hybrid Solar Inverter

A three-phase hybrid inverter rated 10 kW, built around a single 180-580 V high-voltage battery input, 25 A of charge and discharge current, and 13 kW of recommended PV power on two MPPT trackers.

  • Rated Output Power: 10 kW
  • Max Efficiency: 97.6 %
  • Battery Voltage Range: 180-580 V
  • Phase: Three Phase

Models in the T-REX-10KHP3G01 – T-REX-50KHP3G01 family

What sets the T-REX-10KHP3G01 apart from the other 5 models in the family: AC Output Line Voltage 400 V; AC Output Voltage 230 V; AC Rated Output Current 14.5 A; AC Wiring Mode 3L+N+PE; Backup Rated Output Power 10 kW; Battery Inputs 1; Battery Type Lead-Acid, Li-Ion; Battery Voltage Range 180-580 V.

AED 2,793incl. VAT

In stock

  • Delivered within 3 business days, door to door, to every market we serve.
  • Dispatched the same business day for an order placed before 21:00 (Dubai time), or the next business day after.
  • Delivery charge: AED 200
  • 2-year warranty
Full SpecificationsDownload datasheet (PDF)

Felicity Solar T-REX-10KHP3G01 10kW Three-Phase Hybrid Solar Inverter features

  • One 180-580 V high-voltage battery input

    The T-REX-10KHP3G01 carries a single battery input covering 180-580 V, taking Lead-Acid and Li-Ion banks over RS485 and CAN BMS communication.

  • 25 A charging and 25 A discharging

    Maximum charging current and maximum discharging current are both 25 A, AC charging is also 25 A, and maximum charge and discharge power is 10 kW.

  • 13 kW of recommended PV on two MPPTs

    Two MPPT trackers accept 15+15 A of PV input current from a 160 V start-up across a 200-850 V window, up to a 900 V maximum PV voltage and a 720 V nominal input.

  • 10 kW backup at 30 A with a 20 ms transfer

    Backup rated power is 10 kW at up to 30 A, three-phase on 3L+N+PE wiring at 230 V, with a 20 ms transfer time and THD held below 3%.

  • 97.6% maximum efficiency, 99.9% MPPT tracking

    Maximum efficiency is 97.6%, European efficiency 97% and MPPT efficiency 99.9%, with a power factor above 0.99 adjustable from 0.8 leading to 0.8 lagging.

  • 35.3 kg IP65 chassis, 10 units in parallel

    The wall-mounted IP65 chassis is naturally cooled, weighs 35.3 kg net and 39.7 kg gross, runs from -25 to 60 °C with derating above 45 °C, and parallels up to 10 units.

About the Felicity Solar T-REX-10KHP3G01 10kW Three-Phase Hybrid Solar Inverter

The Felicity Solar T-REX-10KHP3G01 is a 10 kW three-phase hybrid solar inverter built around a single 180-580 V high-voltage battery input. It charges and discharges that bank at up to 25 A for 10 kW of charge and discharge power, tracks solar on two MPPTs across 200-850 V, and converts at up to 97.6% maximum efficiency. Array sizing runs to 13 kW of recommended PV power at 15+15 A of input current, capped by a 900 V maximum PV voltage, from a 720 V nominal PV input and a 160 V start-up. On the grid side the T-REX-10KHP3G01 wires 3L+N+PE at 230 V per phase, accepts 184-264.5 V at up to 30 A, delivers up to 18 A, and hands over to a 10 kW backup circuit rated 30 A in 20 ms. The wall-mounted IP65 chassis is naturally cooled, weighs 35.3 kg net and 39.7 kg gross, ships in a 635 x 533 x 315 mm package and parallels up to 10 units. Certified to IEC 62109-1, IEC 62109-2 and IEC 62040-1. We are an authorised Felicity Solar distributor and supply it with a 2 Years warranty.

Specifications last updated 23 July 2026

Felicity Solar T-REX-10KHP3G01 10kW Three-Phase Hybrid Solar Inverter full specifications

Electrical(53)

AC Output Line Voltage400 V
AC Output Voltage230 V
AC Rated Output Current14.5 A
AC Wiring Mode3L+N+PE
Backup Max Output Current30 A
Backup Rated Output Power10 kW
Battery Inputs1
Battery TypeLead-Acid, Li-Ion
Battery Voltage Range180-580 V
Charge AlgorithmSelf-Adaption to BMS
European Efficiency97 %
Grid Frequency Range (50 Hz)45-55 Hz
Grid Frequency Range (60 Hz)55-65 Hz
Grid RegulationVDE-AR-N 4105, G99/1, EN50549-1, CEI 0-21, AS 4777.2, NRS 097-2-1
Ground Fault Current MonitoringYes
Input Voltage Range184-264.5 V
MPPT Efficiency99.9 %
MPPT Full-Load Voltage Range450-850 V
MPPT Trackers2
MPPT Voltage Range200-850 V
Max AC Charge Current25 A
Max AC Input Current30 A
Max AC Output Power10 kW
Max AC Pass-Through Current30 A
Max Charge/Discharge Power10 kW
Max Charging Current25 A
Max Discharging Current25 A
Max Efficiency97.6 %
Max Output Current18 A
Max PV Input Current15+15 A
Max PV Voltage900 V
Max Recommended PV Power13 kW
Max Short-Circuit Current18+18 A
Nominal AC Input Line Voltage400 V
Nominal AC Input Voltage230 V
Nominal Input Frequency50/60 Hz
Output Frequency50/60 Hz
Output Short-Circuit ProtectionYes
Overload ProtectionYes
Overvoltage Category (AC)III
Overvoltage Category (DC)II
PV Working Voltage Range160-900 V
PhaseThree Phase
Power Factor>0.99
Power Factor Adjustment Range0.8 leading to 0.8 lagging
ProtectionOutput Over Current Protection, Output Over Power Protection, Output Shorted Protection, Anti-islanding Protection, GFCI Protection, Insulation Resistor Detection
Rated Apparent Output Power10 kVA
Rated Output Power10 kW
Rated PV Input Voltage720 V
Start-Up Voltage160 V
Strings per MPPT1
Total Harmonic Distortion<3 %
Transfer Time20 ms

Mechanical(11)

BMS CommunicationRS485, CAN
Communication InterfaceRS232, RS485
DisplayLCD, LED
Gross Weight39.7 kg
Installation StyleWall-Mounted
Monitoring ModuleWiFi/GPRS
Net Weight35.3 kg
Package Dimensions635 x 533 x 315 mm
Parallel Capability10
Safety StandardIEC 62109-1, IEC 62109-2, IEC 62040-1
TopologyNon-Isolated

Environmental(5)

CoolingNature
IP RatingIP65
Operating Altitude2000 m
Operating Temperature Range-25 to 60 (>45 derating) °C
Relative Humidity0-100 %

Certifications(3)

  • IEC 62109-1
  • IEC 62109-2
  • IEC 62040-1

Downloads & support

PDFThe manufacturer's sheet, to print or share

Troubleshooting & error codes

Looking up an error code on this FelicityESS T-REX-10KHP3G01? Browse the full list of codes for this device, with the cause and recommended fix for each.

View error codes for this device →

Frequently Asked Questions

What battery voltage does the T-REX-10KHP3G01 support?

180-580 V. The T-REX-10KHP3G01 has one battery input covering that high-voltage window and takes Lead-Acid and Li-Ion banks, with RS485 and CAN for BMS communication. Maximum charging current and maximum discharging current are both 25 A, AC charging is also 25 A, and maximum charge and discharge power is 10 kW.

How much solar can the T-REX-10KHP3G01 take?

13 kW is the maximum recommended PV power. Two MPPT trackers accept 15+15 A of PV input current from a 160 V start-up voltage across a 200-850 V tracking window, with a 720 V nominal PV input and a 900 V maximum PV voltage. MPPT efficiency is 99.9%, maximum efficiency 97.6% and European efficiency 97%.

How fast does the T-REX-10KHP3G01 switch to backup power?

20 ms is the transfer time. Backup rated power is 10 kW at up to 30 A, three-phase at 230 V on 3L+N+PE wiring, with THD below 3%, a power factor above 0.99, output over-current, over-power and short-circuit protection, anti-islanding protection, GFCI protection, insulation resistor detection and ground fault current monitoring.

What does the T-REX-10KHP3G01 weigh and how is it mounted?

35.3 kg net and 39.7 kg gross, shipping in a 635 x 533 x 315 mm package. The non-isolated chassis is wall-mounted, IP65-rated and naturally cooled, works from -25 to 60 °C with derating above 45 °C, in 0-100% relative humidity up to 2000 m of altitude, and carries an LCD and LED display with RS232 and RS485 interfaces. Up to 10 units can be paralleled.

Customer reviews