
Felicity Solar SCCM4524-III Solar Charge Controller
- PV Start-up Voltage:20V
- Nominal System Voltage:12V, 24V, 48V (Auto Detection)

Charge ControllersModel SCCM6048-III
The Felicity SCCM6048-III increases charge current beyond the SCCM4548-III while staying on a 12-48V battery bank.
In stock
The Felicity Solar SCCM6048-III is a 60A MPPT solar charge controller for a 12-48V battery bank, tracking the same 18-125V MPPT window and 145V input ceiling as the SCCM4548-III but accepting up to 3300W of panel input at up to 98% efficiency with 3-Step charging. It supports AGM, Gel, Flooded, Lithium and user-defined battery types, communicates over RS485, CAN, MODBUS, Bluetooth and WiFi, and weighs 3.3 kg in a wall-mounted IP20 enclosure. We are an authorised Felicity Solar distributor and supply the SCCM6048-III from our own stock, with technical support before and after the sale. The enclosure shares the SCCM4548-III's 276.4 x 184.4 x 100 mm footprint and LCD display, and its higher 60A rating on the same 12-48V bank suits a larger 48V residential or small commercial system than the SCCM4548-III covers.
Specifications last updated 17 August 2026
| PV Start-up Voltage | 20V |
|---|---|
| Nominal System Voltage | 12V, 24V, 48V (Auto Detection) |
| Temperature Compensation Coefficient | -5 mV/°C/cell (25°Cref.) |
| Maximum Charge Current | 60 A |
| Nominal System Voltage | 12-48 V |
| MPPT Voltage Range | 18-125 V |
| Maximum PV Input Voltage | 145 V |
| Maximum PV Input Power | 825-3300 W |
| Maximum Efficiency | 98 % |
| Charging Algorithm | 3-Step |
| Supported Battery Types | AGM, Gel, Flooded, Lithium, User-Defined |
| Communication | RS485, CAN, MODBUS, Bluetooth, WiFi |
| Ingress Protection | IP20 |
| Surge Protection | 4500 W/port |
|---|---|
| Installation | Wall-Mounted |
| Net Weight | 3.3 kg |
| System Nominal Voltage | 12-48 V |
| Max Charge Current | 60 A |
| Max PV Input Power | 825-3300 W |
| Max PV Input Voltage | 145 V |
| Max Efficiency | 98 % |
| Temperature Compensation Range | 0-50 °C |
| Protection Features | Solar high voltage disconnect, Solar high voltage reconnect, Battery high voltage disconnect, Battery high voltage reconnect, High temperature disconnect, High temperature reconnect |
| Operating Temperature | 0-55 °C |
| Storage Temperature Range | -25 to 75 °C |
| Display | LCD |
|---|---|
| Communication Interface | RS485, CAN, MODBUS, Bluetooth, WiFi |
| Overall Dimensions | 276.4 x 184.4 x 100 mm |
| Weight | 3.3 kg |
| Gross Weight | 3.7 kg |
| Package Dimensions | 308 x 212 x 125 mm |
| Ambient Temperature Range | 0°C to +55 °C |
|---|---|
| Storage Temperature | -25 °C to +75 °C |
| Humidity | 0%-90%RH (No Condensing) |
| IP Rating | IP20 |
| Relative Humidity | 0-90 (non-condensing) % |
Looking up an error code on this FelicityESS SCCM3024-III? Browse the full list of codes for this device, with the cause and recommended fix for each.
View error codes for this device →60 A is its maximum charge current, into a 12-48 V bank that the controller detects automatically. Every figure here is from the manufacturer's data for the SCCM6048-III.
Maximum PV input voltage is 145 V and array power is rated 825-3300 W across the supported battery voltages. Tracking starts once the array reaches 20 V.
AGM, Gel, Flooded, Lithium, User-Defined — all selectable on the SCCM6048-III's 12-48 V bank at up to 60 A, charged in 3-step stages with a temperature compensation of -5 mV/°C/cell (25 °C ref.).