
FL-OPzV-1000AH-2V
- Voltage Per Unit:2V
- Capacity:1000Ah @10hr-rate to 1.80V per cell @25°C

The Felicity FLA12300PG2 is a battery with a Main Circuit ●●●O ••oo nominal bus, 26,000 Cycles Shown in 3,4 Connection for Parallel Mode User
The Felicity FLA12300PG2 is a battery with a Main Circuit ●●●O ••oo nominal bus, 26,000 Cycles Shown in 3,4 Connection for Parallel Mode User manual rated. Every figure on this page is taken from the manufacturer's datasheet for the FLA12300PG2.
| Energy | 3.75kWh RUN LED: Indicates normal battery operating status(remains on during Dallery |
|---|---|
| Operating Voltage | 11.2-14,4V Series Mode Warnings |
| Communication | Used for |
| Peak Charge/Discharge Current(158) | 50% BTCB0606/BTCB0303 •ooo |
| Max.Charge/Discharge Power | 1875W |
| Protection Level | IP21 Paralel Warnings Mode Diagram |
| Cycle Life | 26,000 Cycles Shown in 3,4 Connection for Parallel Mode User manual User manual |
| Protection | 4. OPERATION Main Circuit |
| RS485 cable | Battery |
| Max. Charging Voltage | 14.4V Trigger-GND C02 |
| Floating Charging Voltage | 14,4V Battery undervoltage 1. Assemble battery ring |
| Max. Charging Current | 150A'N C03 Cell overvoltage 2. INTRODUCTION Household |
| Cut-off Voltage | 12V |
| RS485 | C04 Cell undervoltage COO |
| Display | LED |
|---|---|
| Gross Weight | C05 |
| Product Dimension | 379x241x286mm C07 OFF ON |
| Package Dimension | 438x300x344mm ⑥ Battery |




Felicity battery not charging? Below 0°C the BMS blocks the charge, a charge voltage under 57.6 V never fills the pack, and codes C01–C08 explain the rest.
Read: Felicity Battery Not Charging? Codes, Causes & Fixes →A long outage drained the battery, the grid came back shaky, and now there is a code on the screen. What 04, C02, 27 and the grid-return alarms really mean.
Read: Felicity Inverter Error After a Power Cut? What It Means →Inverter cutting out on hot afternoons? Error 18, T-REX 35/F35, E-CHO E12/E13, MPPT 87 and battery C09 — the official Felicity heat codes and their fixes.
Read: Felicity Inverter Overheating? Error 18 & Heat Codes →