Felicity Solar IVEM5048-LV 5kW Single-Phase Off-Grid Solar Inverter

A 5 kW single-phase inverter-charger on a 48 V bus, with a built-in 100 A MPPT solar controller, 110 V pure sine wave output and a 10 ms UPS-mode changeover.

Rated Output Power: 5 kW
Max Efficiency: 93 %
Max PV Input Power: 6 kW
Battery Voltage Range: 42-63 V

1,321 AEDincl. VAT

In stock

Full Specifications Download datasheet (PDF)

Felicity Solar IVEM5048-LV 5kW Single-Phase Off-Grid Solar Inverter features

5 kW continuous, 5 kVA apparent output

Rated at 5 kW single-phase on 110 V with up to 50 A output current, and a surge rating of twice the rated power for 5 seconds.

Built-in 100 A MPPT solar charger

One MPPT tracker accepts up to 6 kW of PV, works from 120 V to 450 V, starts at 125 V and tolerates 500 V maximum input.

48 V battery bus with a 42-63 V working range

Charges the 48 V bank behind this 5 kW inverter at up to 100 A in three stages, 56.4 V bulk and 54 V float, across AGM, flooded, lithium-ion and self-defined banks over RS485 BMS.

10 ms UPS-mode transfer and 63 A pass-through

Switches to battery in 10 ms in UPS mode and 20 ms in appliance mode, passing up to 63 A of mains or generator power through to the 50 A output.

93% peak efficiency, above 95% in line mode

Peak conversion efficiency is 93% and line mode runs above 95%, with the 110 V output held within 5% regulation across the full 50 A.

13.1 kg wall-mounted IP21 chassis

Measures 460 x 343 x 137 mm at 13.1 kg net, air-cooled, with an LCD, built-in WiFi and up to 6 units in parallel.

About the Felicity Solar IVEM5048-LV 5kW Single-Phase Off-Grid Solar Inverter

The Felicity Solar IVEM5048-LV is a 5 kW (5 kVA) single-phase off-grid inverter-charger built on a 48 V DC battery bus, with a built-in 100 A MPPT solar charger that accepts up to 6 kW of PV. It runs a 110 V, 50/60 Hz pure sine wave circuit at up to 50 A from batteries, panels or mains. The IVEM5048-LV takes one PV string on a single MPPT tracker working from 120 V to 450 V, starting at 125 V, 500 V maximum. The charger on this 5 kW unit runs three stages at up to 100 A, 56.4 V bulk and 54 V float, for AGM, flooded, lithium-ion and self-defined banks over RS485 BMS. AC input from 65 V to 140 V lets a weak grid or generator carry this 5 kW unit's loads, passing 63 A through, with a 10 ms UPS-mode changeover. Peak efficiency is 93%, above 95% in line mode, with output held within 5% regulation across the full 50 A. The 13.1 kg wall-mounted IP21 body measures 460 x 343 x 137 mm and meets IEC 62109-1 and IEC 62109-2. We are an authorised Felicity Solar distributor and supply the IVEM5048-LV from our own stock.

Specifications last updated 23 July 2026

Felicity Solar IVEM5048-LV 5kW Single-Phase Off-Grid Solar Inverter full specifications

Electrical

AC Output Voltage	110 V
AC Wiring Mode	L+N+PE
Backup Rated Output Power	5 kW
Battery Inputs	1
Battery Type	AGM, Flooded, Li-Ion, Self-Defined
Battery Voltage Range	42-63 V
Bulk Charging Voltage	56.4 V
Charge Algorithm	Three-Stage: Boost CC, Boost CV, Float
Float Charging Voltage	54 V
High DC Input Recovery Voltage	56.4 V
High Frequency Disconnect	65 Hz
High Frequency Reconnect	63 Hz
High Line Disconnect Voltage	140 V
High Line Reconnect Voltage	135 V
Input Voltage Range	65-140 V
Input Voltage Range (UPS Mode)	90-140 V
Input Voltage Waveform	Sinusoidal (utility or generator)
Line Mode Efficiency	>95 %
Line Mode Output Waveform	Same As Input Waveform
Low DC Shutdown (<50% Load)	43 V
Low DC Shutdown (>50% Load)	42 V
Low Frequency Disconnect	40 Hz
Low Frequency Reconnect	42 Hz
Low Line Disconnect (Appliance Mode)	65 V
Low Line Disconnect (UPS Mode)	90 V
Low Line Reconnect (Appliance Mode)	70 V
Low Line Reconnect (UPS Mode)	95 V
Low-Battery Recovery (<50% Load)	47 V
Low-Battery Recovery (>50% Load)	46 V
MPPT Trackers	1
MPPT Voltage Range	120-450 V
Max AC Charge Current	100 A
Max AC Input Voltage	140 V
Max AC Pass-Through Current	63 A
Max Charging Current	100 A
Max Charging Voltage	60 V
Max Efficiency	93 %
Max Inverter/Rectifier Current	50 A
Max Output Current	50 A
Max PV Input Current	20 A
Max PV Input Power	6 kW
Max PV Voltage	500 V
Max Solar Charging Current	100 A
Motor Start Capable	Yes
Nominal AC Input Voltage	110 V
Nominal DC Input Voltage	48 V
Nominal Input Frequency	50/60 Hz
Output Frequency	50/60 Hz
Output Short-Circuit Protection	Yes
Output Voltage Regulation	5 %
Output Voltage Waveform	Pure Sine Wave
Overload Protection	Yes
Overload Trip Time (>105% Load)	10.5 s
Overload Trip Time (>150% Load)	5.5 s
PV Working Voltage Range	90-500 V
Pass-Through Without Battery	Yes
Phase	Single Phase
Protection	Overload Protection, Over Temperature Protection, Short Circuit Protection
Rated Apparent Output Power	5 kVA
Rated Output Power	5 kW
Short-Circuit Protection (Battery Mode)	Electronic Circuit
Short-Circuit Protection (Line Mode)	Circuit Breaker
Start-Up Voltage	125 V
Strings per MPPT	1
Surge Rating	2*rated (5s)
Transfer Time	50 ms
Transfer Time (Appliance Mode)	20 ms
Transfer Time (UPS Mode)	10 ms

Mechanical

BMS Communication	RS485
Display	LCD
Gross Weight	15 kg
Installation Style	Wall-Mounted
Monitoring Module	Built-In WiFi
Net Weight	13.1 kg
Package Dimensions	562 x 443.5 x 231 mm
Parallel Capability	6
Safety Standard	IEC 62109-1, IEC 62109-2
Topology	High-Frequency

Environmental

Cooling	Intelligent Air Cooling
IP Rating	IP21
Operating Temperature Range	-10 to 50 °C
Storage Temperature	-15 to 60 °C

Certifications

IEC 62109-1
IEC 62109-2

Frequently Asked Questions

5 kW, 5 kVA apparent, single-phase at 110 V and 50/60 Hz, with up to 50 A of output current, a pure sine wave waveform and a surge rating of twice the rated power for 5 seconds.

6 kW is the maximum PV input power. The single MPPT tracker takes one string, works between 120 V and 450 V, starts at 125 V, accepts up to 20 A and 500 V maximum, and charges the battery at up to 100 A.

48 V nominal, over a 42-63 V working range: one battery input takes AGM, flooded, lithium-ion or self-defined banks, charged in three stages at 56.4 V bulk and 54 V float, 60 V maximum, at up to 100 A, with RS485 BMS communication.

-10 °C to 50 °C is the operating range for this wall-mounted IP21 unit. It measures 460 x 343 x 137 mm, weighs 13.1 kg net and 15 kg gross, uses intelligent air cooling and is stored between -15 °C and 60 °C.