2600-3100 W for 15 seconds
short-duration output well above what the 25.6 V module carries continuously

A 27 kg LiFePO4 module storing 2.56 kWh at 100 Ah, peaking at 150 A over 15 seconds and reporting over CAN2.0, RS485, Wi-Fi and Bluetooth.
In stock
The Felicity Solar LPBA24100WG1 is a 25.6 V LiFePO4 battery module that stores 2.56 kWh at 100 Ah and pushes 2600-3100 W for 15 seconds. It holds 100-120 A of charge and discharge current continuously, weighs 27 kg, and parallels up to 32 units for 81.92 kWh of storage. That short-duration figure is what separates this model from the other 2.56 kWh modules in the catalogue: 2600-3100 W and a 150 A peak charge and discharge current, both over 15 seconds, above what it carries continuously. Protection comes from a built-in Smart BMS working with a fuse; the operating window runs 22.4-28.8 V with a 22.4 V cut-off, a 28.8 V maximum charging voltage and a 95% depth of discharge rated beyond 6000 cycles. Monitoring runs over CAN2.0, RS485, Wi-Fi and Bluetooth, with an LED display on the unit. It mounts on a wall or on a floor, is rated IP21, charges at 0-55 °C, discharges from -20 to 55 °C and is stored from -20 to 45 °C. It ships at 31 kg in a 472 x 261 x 427 mm carton. The warranty term is 2 Years. We are an authorised Felicity Solar distributor and supply the LPBA24100WG1 from our own stock.
Specifications last updated 23 March 2026
| Battery Type | LiFePO4 |
|---|---|
| Cut-Off Voltage | 22.4 V |
| Cycle Life | >6000 |
| Depth of Discharge | 95 % |
| Max Charge/Discharge Power (15 s) | 2600-3100 W |
| Max Charging Voltage | 28.8 V |
| Max Continuous Charge/Discharge Current | 100-120 A |
| Max Parallel Units | 32 |
| Max System Capacity | 81.92 kWh |
| Nominal Capacity | 100 Ah |
| Nominal Energy | 2.56 kWh |
| Nominal Voltage | 25.6 V |
| Operating Voltage | 22.4-28.8 V |
| Peak Charge/Discharge Current (15 s) | 150 A |
| Protection | Built-in Smart BMS, Fuse |
| Communication | CAN2.0, RS485, Wi-Fi, Bluetooth |
|---|---|
| Display Type | LED |
| Installation | Wall-Mounted, Floor-Mounted |
| Package Dimensions | 472 x 261 x 427 mm |
| Package Weight | 31 kg |
| Charging Temperature Range | 0-55 °C |
|---|---|
| Discharging Temperature Range | -20 to 55 °C |
| Protection Degree | IP21 |
| Storage Temperature Range | -20 to 45 °C |








An off-grid house is sized by surge, battery energy and charge current - and the surge row is the one that starts your fridge and your pump. Here are the published figures across the Felicity inverters and batteries, with the arithmetic to use them.
Read: How to Run a Whole House on Solar in Khartoum →Extend your off-grid battery life with proper maintenance. Covers LiFePO4, gel, and lead-acid battery care, temperature management, and charge settings.
Read: How to Maintain Solar Batteries for Maximum Lifespan →Overcharging destroys batteries fast. Learn how to set correct charge voltages, use temperature compensation, and configure your Felicity IVPS to prevent damage.
Read: How to Protect Your Off-Grid Batteries from Overcharging →2600-3100 W, alongside a 150 A peak charge and discharge current over the same 15 seconds. Continuously the module carries 100-120 A within a 22.4-28.8 V operating window.
32 units, for a maximum system capacity of 81.92 kWh, since each module stores 2.56 kWh at 100 Ah and a nominal 25.6 V.
27 kg for the module itself, shipped at 31 kg in a 472 x 261 x 427 mm carton. It mounts on a wall or on a floor, is rated IP21, and the warranty is 2 Years.
Wi-Fi and Bluetooth are both fitted, alongside CAN2.0 and RS485 — four communication interfaces in all. An LED display reports on the unit, which is protected by a built-in Smart BMS and a fuse.