What is the E25 error on Felicity?

E25 on a Felicity unit means: GFCI inconsiste.. It can appear on 3 different devices in the Felicity catalog. The cause and recommended fix are listed for each device on this page.

Can I clear the E25 code myself?

It depends on the severity. Warning-level codes can usually be cleared by following the recommended fix. Fault and critical codes often require checking the source condition first; if the code returns immediately after restart, escalate to authorized service.

Is the E25 fix the same on every device?

The cause is consistent — it's the same protection logic. The exact fix wording can differ per device because each official manual addresses model-specific context (input ranges, parallel-config notes, firmware revisions). Use the per-device section that matches your unit.

Where does this information come from?

Every entry is sourced directly from the official Felicity user manual for the affected device. The "Source" line at the bottom of each device's section shows the manual filename and page number.

Fault

E25

GFCI inconsiste.

3 Devices that report this code

What does the E25 error code mean?

E25 on a Felicity unit indicates: GFCI inconsiste.. It is a fault-severity event that can appear on 3 different devices in the Felicity catalog. The same code may have slightly different recommended fixes depending on the device — the per-device sections below show the exact wording from each device's official manual.

This is a fault-severity code

Fault codes stop normal operation but the unit may attempt to recover. Common causes are out-of-range conditions (voltage, current, temperature) that require checking inputs and outputs before restart.

What triggers this code

E25 is triggered when the unit's protection or monitoring logic detects the specific condition described above. The exact trigger depends on the device — see the per-device sections for the official manual entry for each.

E-CHO-SI3KS2Inverter↗ view on device

E25GFCI inconsiste.Fault

Description

GFCI sampling inconsistency between master and slave.

Source:E-CHO-SI3KS2-Operation-Manual.pdf · page 16

E-CHO-SI5KS2Inverter↗ view on device

E25GFCI inconsiste.Fault

Source:E-CHO-SI5KS2-Operation-Manual.pdf

E-CHO-SI8KS2Inverter↗ view on device

E25GFCI inconsiste.Fault

Source:E-CHO-SI8KS2-Operation-Manual.pdf

Frequently asked about E25

What is the E25 error on Felicity?: E25 on a Felicity unit means: GFCI inconsiste.. It can appear on 3 different devices in the Felicity catalog. The cause and recommended fix are listed for each device on this page.
Can I clear the E25 code myself?: It depends on the severity. Warning-level codes can usually be cleared by following the recommended fix. Fault and critical codes often require checking the source condition first; if the code returns immediately after restart, escalate to authorized service.
Is the E25 fix the same on every device?: The cause is consistent — it's the same protection logic. The exact fix wording can differ per device because each official manual addresses model-specific context (input ranges, parallel-config notes, firmware revisions). Use the per-device section that matches your unit.
Where does this information come from?: Every entry is sourced directly from the official Felicity user manual for the affected device. The "Source" line at the bottom of each device's section shows the manual filename and page number.

Compiled from official Felicity user manuals. Always consult your device manual and a qualified technician before performing repairs.