Felicity Solar T-REX-40KHP3G01 40kW Three-Phase Hybrid Solar Inverter

A 40 kW three-phase hybrid inverter that accepts 52 kW of PV across four MPPT trackers at 36+36+36+36 A, backs up 40 kW, and guards a 63.8 A output behind 192 A of overcurrent protection.

Rated Output Power: 40 kW
Max Efficiency: 97.6 %
Max PV Input Power: 52 kW
Battery Voltage Range: 160-800 V

13,750 AEDincl. VAT

In stock

Full Specifications Download datasheet (PDF)

Felicity Solar T-REX-40KHP3G01 40kW Three-Phase Hybrid Solar Inverter features

52 kW of PV into a 40 kW inverter

Maximum PV input power is 52 kW on a 40 kW rated inverter, spread over four MPPT trackers that each accept 36 A for 36+36+36+36 A of PV input current, up to a 1000 V maximum PV voltage.

Four MPPTs tracking 200-850 V from a 250 V start-up

The four MPPT trackers open at a 250 V start-up voltage and run from 200 to 850 V around a 600 V rated PV input, from a 150 V minimum DC input voltage, at 99.9% MPPT efficiency.

44 kW maximum AC output at 63.8 A

Rated output is 40 kW and 40 kVA, peaking at 44 kW and 63.8 A on three-phase 220-230 V 3L+N+PE wiring at 50/60 Hz, with 1.5 times rated power for 10 s of surge and under 3% total harmonic distortion.

40 kW of backup on a 160-800 V LFP bank

Backup rated power is 40 kW, drawn from two battery inputs carrying an LFP bank across 160-800 V at 50+50 A of maximum charging and 50+50 A of maximum discharging current, with BMS communication over RS485 and CAN.

192 A output overcurrent protection, 10 ms transfer

Output overcurrent protection is rated 192 A and backup takes over in 10 ms, behind anti-islanding protection, a residual current monitoring unit, insulation resistor detection, PV and battery reverse polarity protection and surge protection level II.

85.6 kg IP65 chassis, 12 units in parallel

The wall-mounted IP65 chassis weighs 85.6 kg net and 102.3 kg gross, works from -25 to 60 °C with derating above 50 °C and up to 3000 m with derating above 2000 m, and parallels up to 12 units. Supplied with a 2 Years warranty.

About the Felicity Solar T-REX-40KHP3G01 40kW Three-Phase Hybrid Solar Inverter

The Felicity Solar T-REX-40KHP3G01 is a three-phase hybrid solar inverter rated 40 kW and 40 kVA, accepting up to 52 kW of PV across four MPPT trackers, delivering 44 kW of maximum AC output and 40 kW of backup power, with a maximum output current of 63.8 A at 97.6% peak efficiency. Each tracker takes 36 A, tracks from 200 to 850 V after a 250 V start-up around a 600 V rated PV input, and works from a 150 V minimum DC input up to 1000 V. Two battery inputs carry an LFP bank across 160-800 V at 50+50 A of charge and discharge, talking to the BMS over RS485 and CAN. Output is 220-230 V per phase on 3L+N+PE wiring at 50/60 Hz, under 3% THD, with a 10 ms transfer time and 1.5 times rated power for 10 s. European efficiency is 97% and MPPT efficiency 99.9%. The wall-mounted IP65 chassis weighs 85.6 kg net, runs from -25 to 60 °C and parallels up to 12 units. We are an authorised Felicity Solar distributor and supply it with a 2 Years warranty.

Specifications last updated 23 July 2026

Felicity Solar T-REX-40KHP3G01 40kW Three-Phase Hybrid Solar Inverter full specifications

Electrical

AC Output Line Voltage	380-400 V
AC Output Voltage	220-230 V
AC Rated Output Current	58 A
AC Wiring Mode	3L+N+PE
Backup Rated Output Power	40 kW
Battery Inputs	2
Battery Type	LFP
Battery Voltage Range	160-800 V
Charge Algorithm	Self-Adaption to BMS
European Efficiency	97 %
Grid Frequency Range (50 Hz)	45-55 Hz
Grid Frequency Range (60 Hz)	55-65 Hz
Grid Regulation	NTS & UNE217001 & UNE217002, CEI 0-21, NRS 097-2-1, NC RFG (Poland), VDE 4105, G99, EN 50549-1, EN 50549-1+Netherlands
Ground Fault Current Monitoring	Yes
Input Voltage Range	184-264.5 V
MPPT Efficiency	99.9 %
MPPT Full-Load Voltage Range	360-850 V
MPPT Trackers	4
MPPT Voltage Range	200-850 V
Max AC Output Power	44 kW
Max AC Pass-Through Current	200 A
Max Charging Current	50+50 A
Max Discharging Current	50+50 A
Max Efficiency	97.6 %
Max Output Current	63.8 A
Max Output Overcurrent Protection	192 A
Max PV Input Current	36+36+36+36 A
Max PV Input Power	52 kW
Max PV Voltage	1000 V
Max Short-Circuit Current	55+55+55+55 A
Min DC Input Voltage	150 V
Nominal AC Input Line Voltage	380-400 V
Nominal AC Input Voltage	220-230 V
Nominal Input Frequency	50/60 Hz
Output Frequency	50/60 Hz
Output Short-Circuit Protection	Yes
Overload Protection	Yes
Overvoltage Category (AC)	III
Overvoltage Category (DC)	II
Phase	Three Phase
Power Factor Adjustment Range	0.8 leading to 0.8 lagging
Protection	PV Input Lightning Protection, PV String Input Reverse Polarity Protection, Battery Input Lightning Protection, AC Output Lightning Protection, Battery Input Reverse Polarity Protection, Insulation Resistor Detection, Residual Current Monitoring Unit, Output Over Current Protection, Output Short-Circuit Protection, Output Over Voltage Protection, Anti-islanding Protection
Rated Apparent Output Power	40 kVA
Rated Output Power	40 kW
Rated PV Input Voltage	600 V
Start-Up Voltage	250 V
Strings per MPPT	2
Surge Protection Level (AC)	II
Surge Rating	1.5*rated (10s)
Total Harmonic Distortion	<3 %
Transfer Time	10 ms

Mechanical

BMS Communication	RS485, CAN
Communication Interface	RS232, RS485
Display	LCD Touch Screen
Gross Weight	102.3 kg
Installation Style	Wall-Mounted
Monitoring Module	WiFi/GPRS
Net Weight	85.6 kg
Package Dimensions	1114 x 774 x 469 mm
Parallel Capability	12
Safety Standard	EN 62477-1, IEC 62109-1, IEC 62109-2
Topology	Non-Isolated

Environmental

Cooling	Smart Cooling
IP Rating	IP65
Operating Altitude	3000 (>2000 derating) m
Operating Temperature Range	-25 to 60 (>50 derating) °C
Relative Humidity	0-95 (non-condensing) %

Certifications

EN 62477-1
IEC 62109-1
IEC 62109-2

Frequently Asked Questions

52 kW is the maximum PV input power, spread over four MPPT trackers that take 36+36+36+36 A of PV input current. Tracking runs from 200 to 850 V after a 250 V start-up voltage, around a 600 V rated PV input, from a 150 V minimum DC input voltage up to a 1000 V maximum PV voltage, at 99.9% MPPT efficiency.

40 kW rated output power and 40 kVA of apparent power, rising to 44 kW of maximum AC output at 63.8 A of maximum output current, three-phase at 220-230 V on 3L+N+PE wiring. It runs at 50/60 Hz from a 184-264.5 V input range, holds total harmonic distortion under 3%, adjusts power factor from 0.8 leading to 0.8 lagging, surges to 1.5 times rated power for 10 s and peaks at 97.6% efficiency, with 97% European efficiency. Grid settings cover NTS, UNE217001, UNE217002, CEI 0-21, NRS 097-2-1, NC RFG (Poland), VDE 4105, G99 and EN 50549-1.

160-800 V is the battery voltage range, carried on two battery inputs for LFP batteries at 50+50 A of maximum charging current and 50+50 A of maximum discharging current, backing up 40 kW. BMS communication runs over RS485 and CAN, the unit itself is reached over RS232 and RS485, and an LCD touch screen plus a WiFi or GPRS monitoring module report the bank. Transfer to backup takes 10 ms.

IP65 is the enclosure rating, so the wall-mounted chassis works outdoors from -25 to 60 °C with derating above 50 °C, in 0-95% non-condensing humidity and up to 3000 m of altitude with derating above 2000 m, under smart cooling. It weighs 85.6 kg net and 102.3 kg gross and ships in a 1114 x 774 x 469 mm package. The non-isolated unit carries overvoltage category III, surge protection level II, ground fault current monitoring and certification to EN 62477-1, IEC 62109-1 and IEC 62109-2, and up to 12 units can be paralleled. We are an authorised Felicity Solar distributor and supply it with a 2 Years warranty.