Felicity Solar T-REX-29K9HP3G01 29.9kW Three-Phase Hybrid Solar Inverter

The T-REX-29K9HP3G01 is a three-phase hybrid inverter rated 29.9 kW and 29.9 kVA, with 38.87 kW of PV input across three MPPT trackers, 43.4 A of rated output current and two 160-800 V LFP battery inputs.

Rated Output Power: 29.9 kW
Max Efficiency: 97.6 %
Max PV Input Power: 38.87 kW
Battery Voltage Range: 160-800 V

13,750 AEDincl. VAT

In stock

Full Specifications Download datasheet (PDF)

Felicity Solar T-REX-29K9HP3G01 29.9kW Three-Phase Hybrid Solar Inverter features

29.9 kW rated three-phase output from the T-REX-29K9HP3G01

Rated 29.9 kW and 29.9 kVA, with the full 29.9 kW held on backup output and a surge capability of 1.5 times rated power for 10 s.

38.87 kW of PV input across three MPPT trackers

Each tracker accepts 36 A and tracks from 200 to 850 V, starting up at 250 V with 1000 V maximum PV voltage.

97.6% peak conversion efficiency

European efficiency is 97% and MPPT tracking efficiency 99.9%, with total harmonic distortion below 3%.

43.4 A rated output current on a 3L+N+PE connection

Three-phase output at 220-230 V per phase, protected at 144 A output overcurrent and adjustable from 0.8 leading to 0.8 lagging power factor.

Two LFP battery inputs from 160-800 V

Charge and discharge at 50+50 A, with RS485 and CAN communication to the battery BMS and a 10 ms transfer to backup.

IP65 wall-mounted enclosure at 85.6 kg net

Smart cooling, an LCD touch screen, WiFi/GPRS monitoring and parallel operation of up to 12 units.

About the Felicity Solar T-REX-29K9HP3G01 29.9kW Three-Phase Hybrid Solar Inverter

The Felicity Solar T-REX-29K9HP3G01 is a three-phase hybrid solar inverter rated 29.9 kW and 29.9 kVA that holds the same 29.9 kW on backup output. It accepts up to 38.87 kW of PV input across three MPPT trackers and delivers 43.4 A of rated AC current at 220-230 V per phase over a 3L+N+PE connection. Each tracker takes 36 A, tracks between 200-850 V and starts up at 250 V, with 1000 V maximum PV voltage, 600 V rated PV input voltage and a 150 V minimum DC input. Two battery inputs carry LFP packs from 160-800 V, charging and discharging at 50+50 A, with RS485 and CAN links to the battery BMS. Peak efficiency is 97.6%, European efficiency 97% and MPPT tracking efficiency 99.9%, with total harmonic distortion under 3% and a 10 ms transfer to backup. The IP65 wall-mounted body uses smart cooling, weighs 85.6 kg net, shows status on an LCD touch screen and reports over WiFi/GPRS, and up to 12 units run in parallel. We are an authorised Felicity Solar distributor and supply the T-REX-29K9HP3G01 from our own stock.

Specifications last updated 23 July 2026

Felicity Solar T-REX-29K9HP3G01 29.9kW Three-Phase Hybrid Solar Inverter full specifications

Electrical

AC Output Line Voltage	380-400 V
AC Output Voltage	220-230 V
AC Rated Output Current	43.4 A
AC Wiring Mode	3L+N+PE
Backup Rated Output Power	29.9 kW
Battery Inputs	2
Battery Type	LFP
Battery Voltage Range	160-800 V
Charge Algorithm	Self-Adaption to BMS
European Efficiency	97 %
Grid Frequency Range (50 Hz)	45-55 Hz
Grid Frequency Range (60 Hz)	55-65 Hz
Grid Regulation	NTS & UNE217001 & UNE217002, CEI 0-21, NRS 097-2-1, NC RFG (Poland), VDE 4105, G99, EN 50549-1, EN 50549-1+Netherlands
Ground Fault Current Monitoring	Yes
Input Voltage Range	184-264.5 V
MPPT Efficiency	99.9 %
MPPT Full-Load Voltage Range	360-850 V
MPPT Trackers	3
MPPT Voltage Range	200-850 V
Max AC Output Power	29.9 kW
Max AC Pass-Through Current	200 A
Max Charging Current	50+50 A
Max Discharging Current	50+50 A
Max Efficiency	97.6 %
Max Output Current	43.4 A
Max Output Overcurrent Protection	144 A
Max PV Input Current	36+36+36 A
Max PV Input Power	38.87 kW
Max PV Voltage	1000 V
Max Short-Circuit Current	55+55+55 A
Min DC Input Voltage	150 V
Nominal AC Input Line Voltage	380-400 V
Nominal AC Input Voltage	220-230 V
Nominal Input Frequency	50/60 Hz
Output Frequency	50/60 Hz
Output Short-Circuit Protection	Yes
Overload Protection	Yes
Overvoltage Category (AC)	III
Overvoltage Category (DC)	II
Phase	Three Phase
Power Factor Adjustment Range	0.8 leading to 0.8 lagging
Protection	PV Input Lightning Protection, PV String Input Reverse Polarity Protection, Battery Input Lightning Protection, AC Output Lightning Protection, Battery Input Reverse Polarity Protection, Insulation Resistor Detection, Residual Current Monitoring Unit, Output Over Current Protection, Output Short-Circuit Protection, Output Over Voltage Protection, Anti-islanding Protection
Rated Apparent Output Power	29.9 kVA
Rated Output Power	29.9 kW
Rated PV Input Voltage	600 V
Start-Up Voltage	250 V
Strings per MPPT	2
Surge Protection Level (AC)	II
Surge Rating	1.5*rated (10s)
Total Harmonic Distortion	<3 %
Transfer Time	10 ms

Mechanical

BMS Communication	RS485, CAN
Communication Interface	RS232, RS485
Display	LCD Touch Screen
Gross Weight	102.3 kg
Installation Style	Wall-Mounted
Monitoring Module	WiFi/GPRS
Net Weight	85.6 kg
Package Dimensions	1114 x 774 x 469 mm
Parallel Capability	12
Safety Standard	EN 62477-1, IEC 62109-1, IEC 62109-2
Topology	Non-Isolated

Environmental

Cooling	Smart Cooling
IP Rating	IP65
Operating Altitude	3000 (>2000 derating) m
Operating Temperature Range	-25 to 60 (>50 derating) °C
Relative Humidity	0-95 (non-condensing) %

Certifications

EN 62477-1
IEC 62109-1
IEC 62109-2

Frequently Asked Questions

38.87 kW is the maximum PV input of the T-REX-29K9HP3G01, spread over three MPPT trackers that accept 36 A each. Maximum PV voltage is 1000 V, the MPPT window is 200-850 V, rated PV input voltage is 600 V, the unit starts up at 250 V and the minimum DC input voltage is 150 V.

29.9 kW and 29.9 kVA rated, with 43.4 A of three-phase output current at 220-230 V per phase on a 3L+N+PE connection. Backup output is also rated 29.9 kW, surge capability is 1.5 times rated power for 10 s, and output overcurrent protection acts at 144 A.

160-800 V LFP battery packs, connected over two battery inputs and charging or discharging at 50+50 A. RS485 and CAN carry the link to the battery BMS, and the inverter transfers to backup in 10 ms while holding 29.9 kW of backup output.

-25 °C to 60 °C is the operating range, with derating above 50 °C, up to 3000 m altitude (derating above 2000 m) and 0-95% non-condensing humidity. The IP65 wall-mounted enclosure uses smart cooling, weighs 85.6 kg net and 102.3 kg gross, and carries EN 62477-1, IEC 62109-1 and IEC 62109-2. Warranty is 2 Years.