Felicity Solar T-REX-30KHP3G01 30kW Three-Phase Hybrid Solar Inverter

The T-REX-30KHP3G01 is a three-phase hybrid inverter rated 30 kVA and oversized on the DC side: 39 kW of PV across three MPPTs, 33 kW of peak AC output and 47.9 A of maximum output current.

Rated Output Power: 30 kW
Max Efficiency: 97.6 %
Max PV Input Power: 39 kW
Battery Voltage Range: 160-800 V

13,750 AEDincl. VAT

In stock

Full Specifications Download datasheet (PDF)

Felicity Solar T-REX-30KHP3G01 30kW Three-Phase Hybrid Solar Inverter features

39 kW of PV input across 3 MPPTs

Three trackers accept 36+36+36 A of string current inside a 200-850 V window, under a 1000 V maximum PV voltage.

33 kW peak AC output from a 30 kVA rating

Maximum output current is 47.9 A per phase, with 1.5x rated power for 10 s of surge headroom and 144 A overcurrent protection.

Two battery inputs at 50+50 A charge and discharge

Supports LFP packs from 160 to 800 V, communicating with the pack BMS over RS485 and CAN.

97.6% maximum conversion efficiency

European efficiency is 97% and MPPT tracking efficiency reaches 99.9%, from a 250 V start-up voltage.

10 ms transfer time on 30 kW of backup output

Three-phase 220-230 V at 50/60 Hz on a 3L+N+PE connection, THD under 3%, with anti-islanding and residual current monitoring.

IP65 enclosure rated -25 to 60 °C

Smart cooling, wall-mounted at 85.6 kg net, monitored over WiFi/GPRS, and parallelable to 12 units.

About the Felicity Solar T-REX-30KHP3G01 30kW Three-Phase Hybrid Solar Inverter

The Felicity Solar T-REX-30KHP3G01 is a three-phase hybrid solar inverter rated 30 kVA, with 30 kW of backup output. It accepts up to 39 kW of PV across 3 MPPTs, peaks at 33 kW of AC output and 47.9 A, converts at up to 97.6%, and drives LFP batteries anywhere from 160 to 800 V. Two battery inputs charge and discharge at 50+50 A and talk to the pack BMS over RS485 and CAN. The tracking window runs 200-850 V on 36+36+36 A of string current under a 1000 V ceiling, from a 600 V nominal input and a 250 V start-up, with 150 V minimum DC input. Output is 220-230 V on a 3L+N+PE connection at 50/60 Hz, THD under 3%, 10 ms transfer time and 144 A output overcurrent protection. The IP65 wall-mounted enclosure uses smart cooling, weighs 85.6 kg net, runs from -25 to 60 °C, reports over WiFi/GPRS and an LCD touch screen, and parallels to 12 units. We are an authorised Felicity Solar distributor and supply the T-REX-30KHP3G01 from our own stock.

Specifications last updated 23 July 2026

Felicity Solar T-REX-30KHP3G01 30kW Three-Phase Hybrid Solar Inverter full specifications

Electrical

AC Output Line Voltage	380-400 V
AC Output Voltage	220-230 V
AC Rated Output Current	43.5 A
AC Wiring Mode	3L+N+PE
Backup Rated Output Power	30 kW
Battery Inputs	2
Battery Type	LFP
Battery Voltage Range	160-800 V
Charge Algorithm	Self-Adaption to BMS
European Efficiency	97 %
Grid Frequency Range (50 Hz)	45-55 Hz
Grid Frequency Range (60 Hz)	55-65 Hz
Grid Regulation	NTS & UNE217001 & UNE217002, CEI 0-21, NRS 097-2-1, NC RFG (Poland), VDE 4105, G99, EN 50549-1, EN 50549-1+Netherlands
Ground Fault Current Monitoring	Yes
Input Voltage Range	184-264.5 V
MPPT Efficiency	99.9 %
MPPT Full-Load Voltage Range	360-850 V
MPPT Trackers	3
MPPT Voltage Range	200-850 V
Max AC Output Power	33 kW
Max AC Pass-Through Current	200 A
Max Charging Current	50+50 A
Max Discharging Current	50+50 A
Max Efficiency	97.6 %
Max Output Current	47.9 A
Max Output Overcurrent Protection	144 A
Max PV Input Current	36+36+36 A
Max PV Input Power	39 kW
Max PV Voltage	1000 V
Max Short-Circuit Current	55+55+55 A
Min DC Input Voltage	150 V
Nominal AC Input Line Voltage	380-400 V
Nominal AC Input Voltage	220-230 V
Nominal Input Frequency	50/60 Hz
Output Frequency	50/60 Hz
Output Short-Circuit Protection	Yes
Overload Protection	Yes
Overvoltage Category (AC)	III
Overvoltage Category (DC)	II
Phase	Three Phase
Power Factor Adjustment Range	0.8 leading to 0.8 lagging
Protection	PV Input Lightning Protection, PV String Input Reverse Polarity Protection, Battery Input Lightning Protection, AC Output Lightning Protection, Battery Input Reverse Polarity Protection, Insulation Resistor Detection, Residual Current Monitoring Unit, Output Over Current Protection, Output Short-Circuit Protection, Output Over Voltage Protection, Anti-islanding Protection
Rated Apparent Output Power	30 kVA
Rated Output Power	30 kW
Rated PV Input Voltage	600 V
Start-Up Voltage	250 V
Strings per MPPT	2
Surge Protection Level (AC)	II
Surge Rating	1.5*rated (10s)
Total Harmonic Distortion	<3 %
Transfer Time	10 ms

Mechanical

BMS Communication	RS485, CAN
Communication Interface	RS232, RS485
Display	LCD Touch Screen
Gross Weight	102.3 kg
Installation Style	Wall-Mounted
Monitoring Module	WiFi/GPRS
Net Weight	85.6 kg
Package Dimensions	1114 x 774 x 469 mm
Parallel Capability	12
Safety Standard	EN 62477-1, IEC 62109-1, IEC 62109-2
Topology	Non-Isolated

Environmental

Cooling	Smart Cooling
IP Rating	IP65
Operating Altitude	3000 (>2000 derating) m
Operating Temperature Range	-25 to 60 (>50 derating) °C
Relative Humidity	0-95 (non-condensing) %

Certifications

EN 62477-1
IEC 62109-1
IEC 62109-2

Frequently Asked Questions

39 kW of PV input, spread over 3 MPPTs that accept 36+36+36 A of string current. The tracking window is 200-850 V under a 1000 V maximum PV voltage, with a 600 V nominal PV input, a 250 V start-up voltage and a 150 V minimum DC input voltage.

160-800 V LFP batteries, across 2 battery inputs. Each pair charges and discharges at 50+50 A, and the inverter communicates with the pack BMS over RS485 and CAN, with RS232 and RS485 available as the service interface.

30 kVA rated apparent power and 30 kW of backup output, peaking at 33 kW AC and 47.9 A. Output is three-phase 220-230 V on a 3L+N+PE connection at 50/60 Hz, THD under 3%, with 1.5x rated power for 10 s of surge, a 10 ms transfer time and a power factor adjustable from 0.8 leading to 0.8 lagging.

-25 to 60 °C, derating above 50 °C, and up to 3000 m altitude with derating above 2000 m, in 0-95% non-condensing humidity. The IP65 wall-mounted enclosure weighs 85.6 kg net and 102.3 kg gross, is certified to EN 62477-1, IEC 62109-1 and IEC 62109-2, and carries a 2 Years warranty.