Felicity Solar FLH96050SG2

Felicity Solar FLH96050SG2 102.4V 5.12kWh LiFePO4 Battery

A stacked high-voltage LiFePO4 cabinet built from 5.12 kWh, 102.4 V modules: two of them make 10.24 kWh, six make 30.72 kWh, at 204.8-614.4 V nominal.

  • System Energy: 10.24-30.72 kWh
  • System Nominal Voltage: 204.8-614.4 V
  • Cycle Life: ≥6000 Cycles
6,144 AEDincl. VAT

In stock

Felicity Solar FLH96050SG2 102.4V 5.12kWh LiFePO4 Battery features

10.24-30.72 kWh from 2 to 6 modules

Every 5.12 kWh, 102.4 V module added to the stack raises system energy, from 10.24 kWh on two modules to 30.72 kWh on six.

9.21-27.64 kWh usable at 90% DoD

A 90% depth of discharge leaves 9.21 kWh usable on a two-module stack and 27.64 kWh on a six-module stack.

204.8-614.4 V nominal on a 185.6-691.2 V window

The bus is nominally 204.8 V to 614.4 V and operates anywhere between 185.6 V and 691.2 V across the 2 to 6 module range.

50 A continuous, 25 A recommended

Each 50Ah module takes up to 50 A of continuous charge and discharge current, with 25 A recommended for daily cycling.

LED plus LCD touch display over a smart BMS

A built-in smart BMS with breaker guards a cycle life rated at 6000 cycles or more, and RS485 and CAN ports carry its data.

IP65 cabinet, 600 x 1760 x 385 mm, 357.5 kg

The IP65 enclosure stacks or floor-mounts, charges from 0 to +55 C and discharges from -20 to +55 C at up to 2000 m.

About the Felicity Solar FLH96050SG2 102.4V 5.12kWh LiFePO4 Battery

The Felicity Solar FLH96050SG2 is a stacked high-voltage LiFePO4 battery built from 5.12 kWh, 102.4 V modules. Two to six modules give 10.24 to 30.72 kWh of system energy at 204.8 to 614.4 V nominal, of which 9.21 to 27.64 kWh is usable at a 90% depth of discharge. Across that 2 to 6 module range the pack operates between 185.6 V and 691.2 V. Each 50Ah module accepts 50 A maximum continuous charge and discharge current, with 25 A the recommended figure for everyday cycling, over a cycle life rated at 6000 cycles or more. A built-in smart BMS and breaker cover protection, an LED plus LCD touch display reports pack state at the cabinet, and RS485 and CAN ports carry that data out. The IP65 enclosure stacks or floor-mounts and is listed at 600 x 1760 x 385 mm and 357.5 kg, each battery module weighing 57.5 kg net and the control module 12.5 kg net (24.5 kg with its base). Charging runs 0 to +55 C, discharging -20 to +55 C, at 5% to 95% humidity below 2000 m. We are an authorised Felicity Solar distributor and supply the FLH96050SG2 from our own stock.

Specifications last updated 23 July 2026

Felicity Solar FLH96050SG2 102.4V 5.12kWh LiFePO4 Battery full specifications

Electrical

Depth of Discharge (DoD)90 %
Max. continuous charge/discharge current50A
Battery TypeLiFePO4
Communication PortRS485/CAN
Cycle Life≥6000Cycles
Display TypeLED+LCD(Touch)
Module Capacity50Ah
Module Energy5.12kWh
Module Nominal Voltage102.4V
System Energy10.24 – 30.72 kWh (2–6 modules)
System Nominal Voltage204.8 – 614.4 V (2–6 modules)
System Operating Voltage185.6 – 691.2 V across the 2–6 module range
System Usable Energy9.21 – 27.64 kWh usable (2–6 modules)
Number of Battery Modules2-6
Recommended Charge/Discharge Current25 A
Max Continuous Charge/Discharge Current50 A
CommunicationRS485 / CAN

Mechanical

Battery Module Net Weight57.5KG
Control Module Gross Weight24.5KG with base
InstallationStacking-Mounting/Floor-Mounting
Package Dimension712x497x352MM with base
Control Module Net Weight12.5 kg
Control Module Dimensions600 x 385 x 200 mm
Battery Module Gross Weight62 kg
Battery Module Dimensions600 x 385 x 260 mm
IP Rating of EnclosureIP65
ProtectionBuilt-in Smart BMS, Breaker

Environmental

Operating Temperature RangeCharge:0~+55°C/Discharge: -20°C~+55°C
Storge Temperature Range0°C~+35°C
Altitude<2000M
Humidity5%~95%
Working Temperature (Charge)0°C to +55°C
Working Temperature (Discharge)-20°C to +55°C
Storage Temperature0°C to +35°C
CertificationUN38.3, IEC 62619, IEC 60730-1, IEC 62040-1, IEC/EN 61000-6-1/2/3/4
Warranty10 Years

Certifications

  • CE