Can I clear the 0x10C2 code myself?

It depends on the severity. Warning-level codes can usually be cleared by following the recommended fix. Fault and critical codes often require checking the source condition first; if the code returns immediately after restart, escalate to authorized service.

Is the 0x10C2 fix the same on every device?

The cause is consistent — it's the same protection logic. The exact fix wording can differ per device because each official manual addresses model-specific context (input ranges, parallel-config notes, firmware revisions). Use the per-device section that matches your unit.

Where does this information come from?

Every entry is sourced directly from the official Felicity user manual for the affected device. The "Source" line at the bottom of each device's section shows the manual filename and page number.

Fault

0x10C2

Q: What does 0x10C2 mean on FLS-ES232LC-S?

Low insulation fault (level 2). Cause: Insulation resistance ≤ 500 Ω/V. Recommended fix: Send faults to EMS and limit power. Recovers when > 600 Ω/V.

Low insulation fault (level 2).

1 Devices that report this code

What does the 0x10C2 error code mean?

0x10C2 on a Felicity unit indicates: Low insulation fault (level 2).. It is a fault-severity event that can appear on 1 device in the Felicity catalog. The same code may have slightly different recommended fixes depending on the device — the per-device sections below show the exact wording from each device's official manual.

This is a fault-severity code

Fault codes stop normal operation but the unit may attempt to recover. Common causes are out-of-range conditions (voltage, current, temperature) that require checking inputs and outputs before restart.

What triggers this code

0x10C2 is triggered when the unit's protection or monitoring logic detects the specific condition described above. The exact trigger depends on the device — see the per-device sections for the official manual entry for each.

FLS-ES232LC-SEnergy storage system↗ view on device

0x10C2Low insulation fault (level 2).Fault— level 2

Cause

Insulation resistance ≤ 500 Ω/V.

Recommended fix

Send faults to EMS and limit power. Recovers when > 600 Ω/V.

Source:FLS-ES232LC-S.pdf

Frequently asked about 0x10C2

What is the 0x10C2 error on Felicity?: 0x10C2 on a Felicity unit means: Low insulation fault (level 2).. It can appear on 1 device in the Felicity catalog. The cause and recommended fix are listed for each device on this page.
Can I clear the 0x10C2 code myself?: It depends on the severity. Warning-level codes can usually be cleared by following the recommended fix. Fault and critical codes often require checking the source condition first; if the code returns immediately after restart, escalate to authorized service.
Is the 0x10C2 fix the same on every device?: The cause is consistent — it's the same protection logic. The exact fix wording can differ per device because each official manual addresses model-specific context (input ranges, parallel-config notes, firmware revisions). Use the per-device section that matches your unit.
Where does this information come from?: Every entry is sourced directly from the official Felicity user manual for the affected device. The "Source" line at the bottom of each device's section shows the manual filename and page number.

Compiled from official Felicity user manuals. Always consult your device manual and a qualified technician before performing repairs.