What is the 0x1032 error on Felicity?

0x1032 on a Felicity unit means: Battery cluster cell overvoltage alarm (level 2).. It can appear on 1 device in the Felicity catalog. The cause and recommended fix are listed for each device on this page.

Can I clear the 0x1032 code myself?

It depends on the severity. Warning-level codes can usually be cleared by following the recommended fix. Fault and critical codes often require checking the source condition first; if the code returns immediately after restart, escalate to authorized service.

Is the 0x1032 fix the same on every device?

The cause is consistent — it's the same protection logic. The exact fix wording can differ per device because each official manual addresses model-specific context (input ranges, parallel-config notes, firmware revisions). Use the per-device section that matches your unit.

Where does this information come from?

Every entry is sourced directly from the official Felicity user manual for the affected device. The "Source" line at the bottom of each device's section shows the manual filename and page number.

Fault

0x1032

Q: What does 0x1032 mean on FLS-ES232LC-S?

Battery cluster cell overvoltage alarm (level 2). Cause: Cell voltage > 3,700 mV. Recommended fix: Send faults externally and limit power. Recovers when < 3,650 mV.

Battery cluster cell overvoltage alarm (level 2).

1 Devices that report this code

What does the 0x1032 error code mean?

0x1032 on a Felicity unit indicates: Battery cluster cell overvoltage alarm (level 2).. It is a fault-severity event that can appear on 1 device in the Felicity catalog. The same code may have slightly different recommended fixes depending on the device — the per-device sections below show the exact wording from each device's official manual.

This is a fault-severity code

Fault codes stop normal operation but the unit may attempt to recover. Common causes are out-of-range conditions (voltage, current, temperature) that require checking inputs and outputs before restart.

What triggers this code

0x1032 is triggered when the unit's protection or monitoring logic detects the specific condition described above. The exact trigger depends on the device — see the per-device sections for the official manual entry for each.

FLS-ES232LC-SEnergy storage system↗ view on device

0x1032Battery cluster cell overvoltage alarm (level 2).Fault— level 2

Cause

Cell voltage > 3,700 mV.

Recommended fix

Send faults externally and limit power. Recovers when < 3,650 mV.

Source:FLS-ES232LC-S.pdf

Frequently asked about 0x1032

What is the 0x1032 error on Felicity?: 0x1032 on a Felicity unit means: Battery cluster cell overvoltage alarm (level 2).. It can appear on 1 device in the Felicity catalog. The cause and recommended fix are listed for each device on this page.
Can I clear the 0x1032 code myself?: It depends on the severity. Warning-level codes can usually be cleared by following the recommended fix. Fault and critical codes often require checking the source condition first; if the code returns immediately after restart, escalate to authorized service.
Is the 0x1032 fix the same on every device?: The cause is consistent — it's the same protection logic. The exact fix wording can differ per device because each official manual addresses model-specific context (input ranges, parallel-config notes, firmware revisions). Use the per-device section that matches your unit.
Where does this information come from?: Every entry is sourced directly from the official Felicity user manual for the affected device. The "Source" line at the bottom of each device's section shows the manual filename and page number.

Compiled from official Felicity user manuals. Always consult your device manual and a qualified technician before performing repairs.