Felicity Solar Inverter Datasheet — IVPS10048P2G1
A 48V inverter/charger holding 8000W continuous from a 10000VA rating, with split-phase 110/120Vac±5% output on HOT1-N or HOT2-N and 90% peak efficiency.
SKU: IVPS10048P2G1 | Last Updated: 2026-07-23
⚡Electrical Specifications
| Battery | 0₁ |
| Power | 0₁ |
| BMS communication | 24V model(default 27.0V) bm5 6 bmS |
| Capable of Starting Electric | Yes |
| Efficiency(Line mode) | >95% |
| Max. Bypass Overload Current | 30A AC63A |
| Nominal Output Frequency(Hz) | 50±0.3Hz/60±0.3Hz(adjustable) backlight will go out after 60s. |
| Output | split-phase system, make sure no "PAL", 3P1, 3P2 |
| Output Frequency | 50Hz |
| Output voltage | 25.0V to 31.5V. Increment of |
| Power derating | 216-06 221 |
| Rated Output Power (VA) | 10000VA |
| Rated Output Power (W) | 8000W |
| Nominal DC Input Voltage | 48V |
| Input Voltage Waveform | Sinusoidal (utility or generator) |
| Terminal Connection | HOT1-HOT2 |
| Nominal Input Voltage | 220Vac |
| Low Line Disconnect | 170±7Vac (UPS) / 90±7Vac (APL) |
| Low Line Re-connect AC Input Range | 180±7Vac (UPS) / 100±7Vac (APL) |
| High Line Disconnect | 280±7Vac |
| High Line Re-connect | 270±7Vac |
| Max AC Input Voltage | 280Vrms |
| Nominal Input Frequency | 50Hz/60Hz |
| Low Line Frequency Disconnect | 40±1Hz |
| Low Line Frequency Re-connect | 42±1Hz |
| High Line Frequency Disconnect | 65±1Hz |
| High Line Frequency Re-connect | 63±1Hz |
| Line Mode Output Waveform | Synchronize with input voltage |
| Over-Load Protection | Air switch protection |
| Efficiency (Line mode) | ≥95% |
| Transfer Time (AC to DC) | 15ms (typical) |
| Transfer Time (DC to AC) | 15ms (typical) / 30ms (special) |
| Pass Through Without Battery | No |
| Overcurrent Protector (grid) | 63A |
| Input Voltage Range (utility charge) | 90-280Vac |
| Max Charge Current | 80A |
| Charge Current Regulation | 0-80A |
| Charger Short Circuit | 63A |
| Over Charge Protection | Yes |
| Output Voltage Waveform | Pure sine wave |
| Nominal Output Voltage | 220/240Vac±5% (HOT1-HOT2) |
| Split-Phase Output Voltage | 110/120Vac±5% (HOT1-N or HOT2-N) |
| Nominal Output Frequency (Hz) | 50±0.3Hz / 60±0.3Hz (adjustable) |
| Output Voltage Regulation | ±5%rms |
| Peak Efficiency | 90% |
| Inverter Over-Load Protection (SMPS load) | 5s@≥150% load; 10s@105%~150% load |
| Surge Rating | 20000VA for 5 seconds |
| Capable of Starting Electric Motor | Yes |
| Output Short Circuit Protection | Yes |
| Min DC Starting Voltage | 46V |
| Low Battery Alarm | 46Vdc (load < 50%) / 44Vdc (load ≥ 50%) |
| Low Battery Recovery | 47Vdc (load < 50%) / 46Vdc (load ≥ 50%) |
| Low DC Input Shut-down | 43Vdc (load < 50%) / 42Vdc (load ≥ 50%) |
| High DC Input Alarm / Fault | 63Vdc±0.4V |
| High DC Input Recovery | 62Vdc±0.4V |
| Boost Charging Voltage (AGM) | 57.6V |
| Float Charging Voltage (AGM) | 54.4V |
| Boost Charging Voltage (Flooded) | 58.4V |
| Float Charging Voltage (Flooded) | 55.2V |
| Self-Defined Charging Voltage (max) | 61.0V |
| Lithium Charging Voltage (max) | 61.0V |
🔧Mechanical Specifications
| Product Dimension | 584x420x195mm |
| Package Dimension | 670x470x355mm |
| Gross Weight | 67.7 kg |
🌡️Environmental Specifications
| Operating temperature | 0°C~40°C |
| Storage temperature | -15°C~60°C |
📏Dimensions
Width584 mm
Height420 mm
Depth195 mm
Weight67.7 kg