
Felicity Solar Inverter Datasheet — IVGM25KHP3G2
A 25 kW three-phase hybrid inverter whose two 150-850 V MPPTs accept 40 kW of array, with 27.5 kW maximum AC output, 39.9 A maximum output current and 25 kW held on backup.
SKU: IVGM25KHP3G2 | Last Updated: 2026-08-07
⚡Electrical Specifications
| AC Output Line Voltage | 190-480 V |
| AC Output Voltage | 110-277 V |
| AC Rated Output Current | 36.3 A |
| AC Wiring Mode | 3L+N+PE |
| Backup Rated Output Power | 25 kW |
| Battery Inputs | 2 |
| Battery Type | LFP |
| Battery Voltage Range | 160-800 V |
| Charge Algorithm | Self-Adaption to BMS |
| European Efficiency | 97 % |
| Grid Frequency Range (50 Hz) | 45-55 Hz |
| Grid Frequency Range (60 Hz) | 55-65 Hz |
| Grid Regulation | NTS & UNE217001 & UNE217002, CEI 0-21, NRS 097-2-1, EN50549-1/-10+Poland Deviations, VDE 4105, G99, EN50549-1/-10, EN50549-1/-10+Netherlands Deviations |
| Ground Fault Current Monitoring | Yes |
| MPPT Efficiency | 99.9 % |
| MPPT Full-Load Voltage Range | 555-850 V |
| MPPT Trackers | 2 |
| MPPT Voltage Range | 150-850 V |
| Max AC Output Power | 27.5 kW |
| Max AC Pass-Through Current | 200 A |
| Max Charging Current | 50+50 A |
| Max Discharging Current | 50+50 A |
| Max Efficiency | 97.6 % |
| Max Output Current | 39.9 A |
| Max Output Overcurrent Protection | 144 A |
| Max PV Access Power | 50 kW |
| Max PV Input Current | 36+36 A |
| Max PV Input Power | 40 kW |
| Max PV Voltage | 1000 V |
| Max Short-Circuit Current | 55+55 A |
| Min DC Input Voltage | 150 V |
| Nominal AC Input Line Voltage | 190-480 V |
| Nominal AC Input Voltage | 110-277 V |
| Nominal Input Frequency | 50/60 Hz |
| Output Frequency | 50/60 Hz |
| Output Short-Circuit Protection | Yes |
| Overload Protection | Yes |
| Overvoltage Category (AC) | III |
| Overvoltage Category (DC) | II |
| Phase | Three Phase |
| Power Factor Adjustment Range | 0.8 leading to 0.8 lagging |
| Protection | PV Input Lightning Protection, PV String Input Reverse Polarity Protection, Battery Input Lightning Protection, AC Output Lightning Protection, Battery Input Reverse Polarity Protection, Insulation Resistor Detection, Residual Current Monitoring Unit, Output Over Current Protection, Output Short-Circuit Protection, Output Over Voltage Protection, Anti-islanding Protection |
| Rated Apparent Output Power | 25 kVA |
| Rated Output Power | 25 kW |
| Rated PV Input Voltage | 600 V |
| Start-Up Voltage | 180 V |
| Strings per MPPT | 2 |
| Surge Protection Level (AC) | II |
| Surge Protection Level (DC) | II |
| Surge Rating | 1.5*rated (10s) |
| Total Harmonic Distortion | <3 % |
| Transfer Time | 10 ms |
🔧Mechanical Specifications
| BMS Communication | RS485, CAN |
| Communication Interface | RS232, RS485 |
| Display | LCD Touch Screen |
| Gross Weight | 107.1 kg |
| Installation Style | Wall-Mounted |
| Monitoring Module | WiFi/GPRS |
| Net Weight | 87.1 kg |
| Package Dimensions | 1114 x 774 x 469 mm |
| Parallel Capability | 12 |
| Safety Standard | EN 62477-1, IEC 62109-1, IEC 62109-2 |
| Topology | Non-Isolated |
🌡️Environmental Specifications
| Cooling | Smart Cooling |
| IP Rating | IP65 |
| Operating Altitude | 3000 (>2000 derating) m |
| Operating Temperature Range | -40 to 60 (>50 derating) °C |
| Relative Humidity | 0-95 (non-condensing) % |
📏Dimensions
Width
Height
Depth
Weight
✅Certifications
EN 62477-1IEC 62109-1IEC 62109-2