
Felicity Solar Inverter Datasheet — IVAM8048P1G1
An 8kW off-grid inverter that takes twice its own AC rating in solar: the IVAM8048P1G1 accepts 16kW of PV across two MPPTs and moves 190A in or out of a 48V bank.
SKU: IVAM8048P1G1 | Last Updated: 2026-08-17
⚡Electrical Specifications
| AC Output Voltage | 230 V |
| AC Wiring Mode | L+N+PE |
| Backup Rated Output Power | 8 kW |
| Battery Inputs | 1 |
| Battery Type | Lead-Acid, Li-Ion |
| Battery Voltage Range | 40-60 V |
| Charge Algorithm | Self-Adaption to BMS |
| DC Switch | Yes |
| Ground Fault Current Monitoring | Yes |
| MPPT Full-Load Voltage Range | 200-425 V |
| MPPT Trackers | 2 |
| MPPT Voltage Range | 90-425 V |
| Max AC Output Power | 8 kW |
| Max AC Pass-Through Current | 50 A |
| Max Charge/Discharge Power | 8 kW |
| Max Charging Current | 190 A |
| Max Discharging Current | 190 A |
| Max Efficiency | 97.6 % |
| Max Output Current | 34.8 A |
| Max PV Input Current | 27+27 A |
| Max PV Input Power | 16 kW |
| Max PV Voltage | 500 V |
| Max Short-Circuit Current | 40+40 A |
| Nominal AC Input Voltage | 230 V |
| Nominal DC Input Voltage | 48 V |
| Nominal Input Frequency | 50/60 Hz |
| Output Frequency | 50/60 Hz |
| Output Short-Circuit Protection | Yes |
| Output Voltage Waveform | Pure Sine Wave |
| Overload Protection | Yes |
| Overvoltage Category (AC) | III |
| Overvoltage Category (DC) | II |
| PV Working Voltage Range | 90-500 V |
| Phase | Single Phase |
| Protection | DC Polarity Reverse Connection Protection, AC Output Overcurrent Protection, AC Output Overvoltage Protection, AC Output Short Circuit Protection, Thermal Protection, DC Terminal Insulation Impedance Monitoring, DC Component Monitoring, Ground Fault Current Monitoring, Arc Fault Circuit Interrupter (optional), Power Network Monitoring, Earth Fault Detection, DC Input Switch, Overvoltage Load Drop Protection |
| Rated Apparent Output Power | 8 kVA |
| Rated Output Power | 8 kW |
| Rated PV Input Voltage | 370 V |
| Start-Up Voltage | 120 V |
| Strings per MPPT | 2+2 |
| Surge Protection Level (AC) | II |
| Surge Protection Level (DC) | II |
| Surge Rating | 2*rated (10s) |
| Total Harmonic Distortion | <3 % |
🔧Mechanical Specifications
| BMS Communication | RS485, CAN |
| Communication Interface | RS485, CAN |
| Display | LCD, LED |
| Gross Weight | 25.4 kg |
| Monitoring Module | WiFi/LAN (optional) |
| Net Weight | 21.4 kg |
| Package Dimensions | 752 x 507 x 348 mm |
| Parallel Capability | 6 |
| Safety Standard | IEC/EN 62109-1, IEC/EN 62109-2 |
| Topology | Non-Isolated |
🌡️Environmental Specifications
| Cooling | Intelligent Air Cooling |
| IP Rating | IP65 |
| Operating Temperature Range | -40 to 60 (>45 derating) °C |
📏Dimensions
Width
Height
Depth
Weight
✅Certifications
IEC 62109-1EN 62109-1IEC 62109-2EN 62109-2