Felicity Solar IVAM6048P1G1

Felicity Solar Inverter Datasheet — IVAM6048P1G1

The Felicity Solar IVAM6048P1G1 is a 6 kW single-phase off-grid solar inverter built around a 48 V battery bank, taking up to 9.6 kW of PV across two MPPT trackers. It peaks at 97.6% efficiency and charges or discharges at up to 135 A.

SKU: IVAM6048P1G1 | Last Updated: 2026-03-23

⚡Electrical Specifications

AC Output Voltage230 V
AC Wiring ModeL+N+PE
Backup Rated Output Power6 kW
Battery Inputs1
Battery TypeLead-Acid, Li-Ion
Battery Voltage Range40-60 V
Charge AlgorithmSelf-Adaption to BMS
DC SwitchYes
European Efficiency96.5 %
Ground Fault Current MonitoringYes
MPPT Efficiency>99 %
MPPT Full-Load Voltage Range300-425 V
MPPT Trackers2
MPPT Voltage Range90-425 V
Max AC Output Power6 kW
Max AC Pass-Through Current35 A
Max Charge/Discharge Power6 kW
Max Charging Current135 A
Max Discharging Current135 A
Max Efficiency97.6 %
Max Output Current26.1 A
Max PV Access Power12 kW
Max PV Input Current20+20 A
Max PV Input Power9.6 kW
Max PV Voltage500 V
Max Short-Circuit Current27+27 A
Nominal AC Input Voltage230 V
Nominal DC Input Voltage48 V
Nominal Input Frequency50/60 Hz
Output Frequency50/60 Hz
Output Short-Circuit ProtectionYes
Output Voltage WaveformPure Sine Wave
Overload ProtectionYes
Overvoltage Category (AC)III
Overvoltage Category (DC)II
PV Working Voltage Range90-500 V
PhaseSingle Phase
ProtectionDC Polarity Reverse Connection Protection, AC Output Overcurrent Protection, AC Output Overvoltage Protection, AC Output Short Circuit Protection, Thermal Protection, DC Terminal Insulation Impedance Monitoring, DC Component Monitoring, Ground Fault Current Monitoring, Arc Fault Circuit Interrupter (optional), Power Network Monitoring, Earth Fault Detection, DC Input Switch, Overvoltage Load Drop Protection
Rated Apparent Output Power6 kVA
Rated Output Power6 kW
Rated PV Input Voltage370 V
Start-Up Voltage120 V
Strings per MPPT2+2
Surge Protection Level (AC)II
Surge Protection Level (DC)II
Surge Rating2*rated (10s)
Total Harmonic Distortion<3 %

🔧Mechanical Specifications

BMS CommunicationRS485, CAN
Communication InterfaceRS485, CAN
DisplayLCD, LED
Gross Weight15.4 kg
Monitoring ModuleWiFi/LAN (optional)
Net Weight13.5 kg
Package Dimensions412 x 532 x 270 mm
Parallel Capability6
Safety StandardIEC/EN 62109-1, IEC/EN 62109-2
TopologyNon-Isolated

🌡️Environmental Specifications

CoolingIntelligent Air Cooling
IP RatingIP65
Noise Level<55 dB
Operating Altitude3000 m
Operating Temperature Range-40 to 60 (>45 derating) °C
Relative Humidity0-100 %

📏Dimensions

Width
Height
Depth
Weight

✅Certifications

IEC 62109-1EN 62109-1IEC 62109-2EN 62109-2