What is the WAITING_TO_CONNECT error on Felicity?

WAITING_TO_CONNECT on a Felicity unit means: Waiting to Connect (LCD icon).. It can appear on 1 device in the Felicity catalog. The cause and recommended fix are listed for each device on this page.

Can I clear the WAITING_TO_CONNECT code myself?

It depends on the severity. Warning-level codes can usually be cleared by following the recommended fix. Fault and critical codes often require checking the source condition first; if the code returns immediately after restart, escalate to authorized service.

Is the WAITING_TO_CONNECT fix the same on every device?

The cause is consistent — it's the same protection logic. The exact fix wording can differ per device because each official manual addresses model-specific context (input ranges, parallel-config notes, firmware revisions). Use the per-device section that matches your unit.

Where does this information come from?

Every entry is sourced directly from the official Felicity user manual for the affected device. The "Source" line at the bottom of each device's section shows the manual filename and page number.

Info

WAITING_TO_CONNECT

Waiting to Connect (LCD icon).

1 Devices that report this code

What does the WAITING_TO_CONNECT error code mean?

WAITING_TO_CONNECT on a Felicity unit indicates: Waiting to Connect (LCD icon).. It is a info-severity event that can appear on 1 device in the Felicity catalog. The same code may have slightly different recommended fixes depending on the device — the per-device sections below show the exact wording from each device's official manual.

This is an informational code

Informational codes are status messages, not faults. They appear during normal operation and require no action beyond awareness.

What triggers this code

WAITING_TO_CONNECT is triggered when the unit's protection or monitoring logic detects the specific condition described above. The exact trigger depends on the device — see the per-device sections for the official manual entry for each.

LUX-X-96050HG01Battery↗ view on device

WAITING_TO_CONNECTWaiting to Connect (LCD icon).Info

Description

LCD icon lights up to indicate that the battery is waiting to be connected and there is no output at this time. After entering normal working mode, this icon disappears.

Cause

Battery has not yet established connection / handshake with the inverter.

Recommended fix

Wait for the battery to enter normal working mode; if it persists, check CAN/RS485 communication wiring to the inverter.

Source:LUX-X-96050HG01-Lithium-Battery-User-Guide.pdf · page 20

Frequently asked about WAITING_TO_CONNECT

What is the WAITING_TO_CONNECT error on Felicity?: WAITING_TO_CONNECT on a Felicity unit means: Waiting to Connect (LCD icon).. It can appear on 1 device in the Felicity catalog. The cause and recommended fix are listed for each device on this page.
Can I clear the WAITING_TO_CONNECT code myself?: It depends on the severity. Warning-level codes can usually be cleared by following the recommended fix. Fault and critical codes often require checking the source condition first; if the code returns immediately after restart, escalate to authorized service.
Is the WAITING_TO_CONNECT fix the same on every device?: The cause is consistent — it's the same protection logic. The exact fix wording can differ per device because each official manual addresses model-specific context (input ranges, parallel-config notes, firmware revisions). Use the per-device section that matches your unit.
Where does this information come from?: Every entry is sourced directly from the official Felicity user manual for the affected device. The "Source" line at the bottom of each device's section shows the manual filename and page number.

Compiled from official Felicity user manuals. Always consult your device manual and a qualified technician before performing repairs.