Felicity Solar Lithium Batteries FLB48100/FLB48206/FLB48230WG1-H
A 100Ah lithium iron phosphate module holding 5.12kWh, rated for >6,000 cycles, wall-mounted or floor-mounted and parallelable to 32 units.
Models and prices
- FLB48100WG1-HAED 3,055incl. VAT
- FLB48206WG1-HAED 4,205incl. VAT
- FLB48230WG1-HAED 7,060incl. VAT
Technical Specifications
| Parameter | FLB48100WG1-H | FLB48206WG1-H | FLB48230WG1-H |
|---|---|---|---|
| Additional Specifications | |||
| Depth of Discharge (DoD) | >95% | >95% | ≥95% |
| Max Continuous Charge/Discharge Current | 100A | 160A | 150 A |
| Working Temperature Range | Charge/Discharge: -20°C~+55 °C | ||
| Storge Temperature Range | 0°C~+35°C | ||
| Certification | UN38.3 | ||
| Cut-off Voltage | 44.8V | ||
| Display type | LED | ||
| Floating Charging Voltage | 57.6V | ||
| Max. Charging Current | 150A*N | ||
| Max. Charging Voltage | 57.6V | ||
| Operating Voltage | 44.8~57.6V | ||
| Recommended Charge/Discharge Current | 100 A | ||
| Package Dimension | 778x548x438mm | ||
| Package Dimensions | 778 x 548 x 438 mm | ||
| Warranty | 10 Years | ||
| Electrical Characteristics | |||
| Communication | CAN2.0/RS485/WIFI/Bluetooth | CAN2.0/RS485/WIFI/Bluetooth | RS485 / CAN |
| Nominal Capacity | 100Ah | 206Ah | 230Ah |
| Peak Charge/Discharge Current(15s) | 150A | 300A | 200A |
| Cycle Life | >6,000 | — | ≥6000Cycles(25°C‡2°C,0.5C/0.5C,90%DOD,70%EOL) |
| General Specifications | |||
| Energy Capacity | 5.12kWh | 10.5kWh | 11.7kWh |
| Battery Type | Lithium Iron Phosphate | Lithium Iron Phosphate | LiFePO4 |
| Nominal Voltage | 51.2V | ||
| Key Features | |||
| High Scalability | Max. 32 pcs in Parallel(163.84kWh) | Max. 32 pcs in Parallel(336kWh) | Up to 32 units in parallel (374.4 kWh) |
| Multiple Protection | Built-in smart BMS, Breaker, Fuse, Thermal Runaway Management System | BMS, Fuse, Breaker, MX+OF, Thermal Runaway Management System | Built-in smart BMS, Breaker, Fuse |
| Flexible Installation | Wall-Mounted / Floor-Mounted | Wall-Mounted / Floor-Mounted | Wall-Mounted/Floor-Mounted |
| IP65 Protection Level | IP65 | ||
| Mechanical Data | |||
| Product Weight | 48.5KG | 91.5KG | — |
| Package Weight | 53KG | 101KG | 111 kg |
| Product Dimension | 650X450X174MM | 715×450X258MM | — |
| Operating Conditions | |||
| Relative Humidity | 5%~95% | ||
| Elevation | <2,000m | <2,000m | ≤2000m |
| Working Temperature | -20°C to +55°C | ||
| Working Temperature (Charge) | -20°C to +55°C | ||
| Storage Temperature | 0°C to +35°C | ||
| BMS Specifications | |||
| Voltage Protection | Low Voltage Protection in Charging | ||
| Current Protection | Over Current Protection in Charging | ||
Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.
Availability & grid compliance in the UAE
| Market | UAE |
|---|---|
| Grid authority / regulator | DEWA, ADDC, SEWA |
| Quotation currency | AED |
| Support hours timezone | Asia/Dubai |
| Main cities | Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in the UAE that rests with the local authorities (DEWA, ADDC, SEWA). Confirm the grid code, import requirements and any local certification with them, or with us, before you order.
Key Features & Technical Highlights
- 5.12kWh nameplate energy at a 100Ah nominal capacity, with depth of discharge rated at >95%.
- Cycle life rated at >6,000, so the FLB48100WG1-H is specified for daily cycling rather than standby duty.
- 100A of continuous charge and discharge current on the FLB48100WG1-H, rising to a 150A peak sustained for 15 seconds.
- Up to 32 units in parallel, taking a single bank to 163.84kWh without changing the module.
- Four protection layers sit across the FLB48100WG1-H's 100A current path: a built-in smart BMS, a breaker, a fuse and a Thermal Runaway Management System.
- 48.5KG net and 53KG packed, in a 650X450X174MM enclosure that is wall-mounted or floor-mounted.
- 206Ah of nominal capacity, published as 10.5kWh of stored energy in one FLB48206WG1-H cabinet.
- Depth of discharge rated at >95%, so almost the whole 10.5kWh is drawn rather than reserved.
- 160A of continuous charge and discharge current, with 300A available on peak.
- Scales to 32 units in parallel for 336kWh, adding 206Ah and 10.5kWh per cabinet.
- Five protection layers — BMS, Fuse, Breaker, MX+OF and a Thermal Runaway Management System — across the full -20°C to +55°C charge and discharge range.
- 91.5KG bare and 101KG boxed in a 715×450X258MM enclosure, wall-mounted or floor-mounted.
Frequently Asked Questions
How much energy does the Felicity Solar FLB48100WG1-H store?
5.12kWh, drawn from a 100Ah lithium iron phosphate pack whose depth of discharge is rated at >95%, so almost the whole nameplate figure is reachable on each cycle.
How long is the FLB48100WG1-H rated to last, and what warranty comes with it?
>6,000 is the rated cycle life of the FLB48100WG1-H, a figure that describes daily cycling rather than standby service, and we supply the unit with a 5 Years warranty.
How fast can the FLB48100WG1-H charge and discharge?
100A continuous in both directions, with a 150A peak held for 15 seconds. A built-in smart BMS, a breaker, a fuse and a Thermal Runaway Management System sit across that current path, and CAN2.0, RS485, WIFI and Bluetooth report what the battery is doing.
How many FLB48100WG1-H units can be installed together, and what space does one take?
32 units in parallel, for 163.84kWh in one bank. Each unit measures 650X450X174MM, weighs 48.5KG net and 53KG packed, and can be wall-mounted or floor-mounted, with an operating range of -20°C to +55°C and altitude below 2,000m.
How much energy does the Felicity Solar FLB48206WG1-H store?
10.5kWh, from a nominal capacity of 206Ah. Depth of discharge is rated at >95%, so nearly all of that 10.5kWh is usable rather than held back, and the cells are Lithium Iron Phosphate.
How many FLB48206WG1-H units can be wired in parallel?
32 units in parallel, reaching 336kWh. Each cabinet added to the bus brings another 206Ah and another 10.5kWh, so a bank grows in fixed steps on the same model rather than by switching to a different one.
What charge and discharge current does the FLB48206WG1-H support?
160A of continuous charge and discharge current, with a 300A peak. Communication runs over CAN2.0, RS485, WIFI and Bluetooth, so an inverter can read the state of the 206Ah pack while it works inside those limits.
How much does the FLB48206WG1-H weigh, and where can it be installed?
91.5KG on its own and 101KG in its packaging, inside a 715×450X258MM enclosure that is wall-mounted or floor-mounted. It runs from -20°C to +55°C, at 5%~95% relative humidity and below 2,000m, and is stored between 0°C and +35°C.
What is the Felicity Solar FLB48230WG1-H?
The FLB48230WG1-H is a Felicity Solar lithium iron phosphate (LiFePO4) battery module rated 51.2V nominal with 11.7kWh of energy capacity. It is built for household solar storage, carries an IP65-rated enclosure and an independently developed smart BMS, and can be wall-mounted or floor-mounted.
How much energy does the FLB48230WG1-H store, and at what voltage?
One FLB48230WG1-H module stores 11.7kWh at a nominal voltage of 51.2V. That is the figure for a single module; connecting further FLB48230WG1-H modules in parallel adds 11.7kWh each while the bank stays at 51.2V nominal.