Fault

LOW POWER (GREEN FLASH, RED OFF, all LEDs OFF)

Low Power / Low SOC shutdown.

1 Devices that report this code

What does the LOW POWER (GREEN FLASH, RED OFF, all LEDs OFF) error code mean?

LOW POWER (GREEN FLASH, RED OFF, all LEDs OFF) on a Felicity unit indicates: Low Power / Low SOC shutdown.. It is a fault-severity event that can appear on 1 device in the Felicity catalog. The same code may have slightly different recommended fixes depending on the device — the per-device sections below show the exact wording from each device's official manual.

This is a fault-severity code

Fault codes stop normal operation but the unit may attempt to recover. Common causes are out-of-range conditions (voltage, current, temperature) that require checking inputs and outputs before restart.

What triggers this code

LOW POWER (GREEN FLASH, RED OFF, all LEDs OFF) is triggered when the unit's protection or monitoring logic detects the specific condition described above. The exact trigger depends on the device — see the per-device sections for the official manual entry for each.

LUX-E-48100LG04Battery↗ view on device
LOW POWER (GREEN FLASH, RED OFF, all LEDs OFF)Low Power / Low SOC shutdown.Fault
Cause

Battery state-of-charge is critically low and the system has entered low-power state with output disabled.

Recommended fix

Recharge the battery. Per section 10.1, charge the battery in time if it is often under-charged or has been stored for more than 3 months. The system will return to normal once charging restores SOC.

Source:LUX-E-48100LG04-Lithium-Battery-User-Guide.pdf · page 12

Frequently asked about LOW POWER (GREEN FLASH, RED OFF, all LEDs OFF)

What is the LOW POWER (GREEN FLASH, RED OFF, all LEDs OFF) error on Felicity?
LOW POWER (GREEN FLASH, RED OFF, all LEDs OFF) on a Felicity unit means: Low Power / Low SOC shutdown.. It can appear on 1 device in the Felicity catalog. The cause and recommended fix are listed for each device on this page.
Can I clear the LOW POWER (GREEN FLASH, RED OFF, all LEDs OFF) code myself?
It depends on the severity. Warning-level codes can usually be cleared by following the recommended fix. Fault and critical codes often require checking the source condition first; if the code returns immediately after restart, escalate to authorized service.
Is the LOW POWER (GREEN FLASH, RED OFF, all LEDs OFF) fix the same on every device?
The cause is consistent — it's the same protection logic. The exact fix wording can differ per device because each official manual addresses model-specific context (input ranges, parallel-config notes, firmware revisions). Use the per-device section that matches your unit.
Where does this information come from?
Every entry is sourced directly from the official Felicity user manual for the affected device. The "Source" line at the bottom of each device's section shows the manual filename and page number.

Compiled from official Felicity user manuals. Always consult your device manual and a qualified technician before performing repairs.