Can I clear the LED-Green-Flash-1s code myself?

It depends on the severity. Warning-level codes can usually be cleared by following the recommended fix. Fault and critical codes often require checking the source condition first; if the code returns immediately after restart, escalate to authorized service.

Is the LED-Green-Flash-1s fix the same on every device?

The cause is consistent — it's the same protection logic. The exact fix wording can differ per device because each official manual addresses model-specific context (input ranges, parallel-config notes, firmware revisions). Use the per-device section that matches your unit.

Where does this information come from?

Every entry is sourced directly from the official Felicity user manual for the affected device. The "Source" line at the bottom of each device's section shows the manual filename and page number.

Info

LED-Green-Flash-1s

Producing Standby.

1 Devices that report this code

What does the LED-Green-Flash-1s error code mean?

LED-Green-Flash-1s on a Felicity unit indicates: Producing Standby.. It is a info-severity event that can appear on 1 device in the Felicity catalog. The same code may have slightly different recommended fixes depending on the device — the per-device sections below show the exact wording from each device's official manual.

This is an informational code

Informational codes are status messages, not faults. They appear during normal operation and require no action beyond awareness.

What triggers this code

LED-Green-Flash-1s is triggered when the unit's protection or monitoring logic detects the specific condition described above. The exact trigger depends on the device — see the per-device sections for the official manual entry for each.

X-RAY-BDM2000Micro-inverter↗ view on device

LED-Green-Flash-1sProducing Standby.Info

Description

Green LED flashing every one second while the inverter is in Producing state (per manual, status: Standby).

Source:/Users/drm/Desktop/Felicity Datasheets/X-RAY-BDM2000-2250W-Micro-Inverter-User-Guide.pdf · page 8

Frequently asked about LED-Green-Flash-1s

What is the LED-Green-Flash-1s error on Felicity?: LED-Green-Flash-1s on a Felicity unit means: Producing Standby.. It can appear on 1 device in the Felicity catalog. The cause and recommended fix are listed for each device on this page.
Can I clear the LED-Green-Flash-1s code myself?: It depends on the severity. Warning-level codes can usually be cleared by following the recommended fix. Fault and critical codes often require checking the source condition first; if the code returns immediately after restart, escalate to authorized service.
Is the LED-Green-Flash-1s fix the same on every device?: The cause is consistent — it's the same protection logic. The exact fix wording can differ per device because each official manual addresses model-specific context (input ranges, parallel-config notes, firmware revisions). Use the per-device section that matches your unit.
Where does this information come from?: Every entry is sourced directly from the official Felicity user manual for the affected device. The "Source" line at the bottom of each device's section shows the manual filename and page number.

Compiled from official Felicity user manuals. Always consult your device manual and a qualified technician before performing repairs.