Felicity Solar Charge Controllers SCCM8048-P
An 80A MPPT solar charge controller that auto-detects 12V, 24V and 48V banks, accepts up to 4400W of array at 48V and peaks at 98% conversion efficiency.
Models and prices
- SCCM8048-PAED 543incl. VAT
Technical Specifications
| Parameter | SCCM8048-P |
|---|---|
| Additional Specifications | |
| Maximum Input Power | 24V-2200W |
| PV Array MPPT | 12 VDC/24VDC/48 VDC |
| PV Array voltage & Battery current | Maximum Battery Current Battery Current(Amps) 130 145 Array Voltage(Volts) For SCCM8048-P |
| Voltage Range | 15-130VDC/30-130VDC 60-130VDC |
| Nominal System Voltage | 12V, 24V, 48V DC (Auto detection) |
| Maximum Solar Input Voltage | 145 V |
| PV Start-up Voltage | 20 V |
| PV Array MPPT Voltage Range (12V battery) | 15-130VDC |
| PV Array MPPT Voltage Range (24V battery) | 30-130VDC |
| PV Array MPPT Voltage Range (48V battery) | 60-130VDC |
| Maximum Input Power (12V) | 1100 W |
| Maximum Input Power (24V) | 2200 W |
| Maximum Input Power (48V) | 4400 W |
| Transient Surge Protection | 4500 W / port |
| Charging Algorithm | 3-Step |
| Charging Stages | Bulk, Absorption, Float |
| Temperature Compensation Coefficient | -5 mV/°C/cell @ 25°C ref |
| Protections | Solar HV disconnect/reconnect, Battery HV disconnect/reconnect, High temperature disconnect/reconnect |
| Special Function | Match the inverter to the MPPT controller (MPPT-match) |
| Product Weight | 6.8 Kg |
| Product Size (W x H x D) | 338 x 206 x 135 mm |
| Display | LCD (built-in) |
| Installation | Indoor wall-mount |
| Heatsink temperature & Battery current | Maximum Battery Current Battery Current(Amps) 60 62.5 65 67.5 70 72.5 75 77.5 80 Heatsink Temperature (degrees C) |
| Humidity | 0%-90%RH(No condensing) Match the MPPT flashes, indicating that the inverter is |
| Storage Temperature | - 25°C to 75°C |
| Temperature compensation range | 0 °C to +50 °C |
| Ambient Temperature Range | 0°C to +55°C |
| Enclosure Rating | IP20 (Indoor & Vented) |
| Warranty | 2 Years |
| PV Input | |
| Maximum Charging Current | 80 A |
| Battery Charging | |
| Float Voltage | 0 | 13.60V |
| Battery Rated Voltage | 12V | 24V | 48V |
| Absorption Voltage | 14.40V |
| Battery Equalization Voltage | 14.60V |
| Battery C.V. Charging Duration | 150 minutes |
| Efficiency | |
| Maximum Efficiency | 98% |
| Mechanical Data | |
| IP Rating | IP20 |
| Protection Features | |
| Overcurrent Protection | Yes |
| Operating Conditions | |
| Operating Temperature | 0°C to 55°C |
Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.
Availability & grid compliance in the UAE
| Market | UAE |
|---|---|
| Grid authority / regulator | DEWA, ADDC, SEWA |
| Quotation currency | AED |
| Support hours timezone | Asia/Dubai |
| Main cities | Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in the UAE that rests with the local authorities (DEWA, ADDC, SEWA). Confirm the grid code, import requirements and any local certification with them, or with us, before you order.
Key Features & Technical Highlights
- 80A charge current, auto-detected bank: The SCCM8048-P delivers up to 80A into a 12V, 24V or 48V DC bank it detects automatically.
- 4400W of PV at 48V: Accepts up to 4400W of array power at 48V, with a 145V maximum solar input voltage.
- 98% maximum efficiency across 15-130VDC: MPPT tracking runs a 15-130VDC window at up to 98% maximum efficiency, waking from 20V.
- 3-Step charging to 14.40V and 13.60V: A 3-Step algorithm holds 14.40V absorption and 13.60V float over a 150 minute constant-voltage stage.
- 4500 W / port surge protection: Transient surge protection rated 4500 W / port adds to overcurrent protection and high-voltage or high-temperature disconnect/reconnect.
- 6.8 kg IP20 indoor wall-mount: The IP20 wall-mount enclosure measures 338 x 206 x 135 mm, weighs 6.8 kg and runs from 0°C to 55°C.
Frequently Asked Questions
How many amps does the SCCM8048-P charge at?
80A. The SCCM8048-P delivers up to 80A of charge current into a 12V, 24V or 48V DC bank, which it detects automatically, converting at up to 98% maximum efficiency.
How many watts of solar panels can I connect to the SCCM8048-P?
4400W at 48V. The maximum solar input voltage is 145V, the MPPT tracking window runs 15-130VDC, and tracking starts once the array reaches a 20V start-up voltage.
What charging voltages does the SCCM8048-P use?
14.40V absorption and 13.60V float, set by a 3-Step algorithm with a 150 minute constant-voltage stage and -5 mV/°C/cell temperature compensation referenced at 25°C, applied from 0 °C to +50 °C.
What size is the SCCM8048-P and where can it be installed?
338 x 206 x 135 mm and 6.8 kg. The IP20 vented enclosure is made for indoor wall-mounting and operates from 0°C to 55°C in 0%-90% non-condensing humidity, with 4500 W / port of transient surge protection.