Felicity Solar LED Solar Street and Garden Lights P2-80W
An 80 W all-in-one solar street light from Felicity Solar, with the monocrystalline module, the LiFePO4 battery and the LED head in a single pole-mounted housing. It arrives as one 24.5 kg piece.
Models and prices
- P2-80WAED 552incl. VAT
Technical Specifications
| Parameter | P2-80W |
|---|---|
| Electrical Characteristics | |
| High capacity lithium battery | Built-in 400Wh |
| Solar module | 80W (Mono) |
| Luminous flux (all light pattern) | 9600 lm |
| Working Mode | 3H100% 4H50% 5H25% |
| Additional Specifications | |
| Solar Panel Charge Time | 8H strong sunlight |
| Power | 80 W |
| Battery Type | LiFePO4 |
| Working Time (All Light Pattern) | ≥12 hours |
| Raining Days Backup | 3 days |
| Induction Angle | 70° x 140° |
| Color Temperature | 6500K |
| Light Pole Diameter | 60 mm |
| Recommended Installation Height | 5-7 m |
| Support Bracket | No |
| Installation | Pole-mount |
| Charge Temperature | 0°C to +55°C |
| Performance & Electrical | |
| Rated Power | 80 W |
| Solar Panel Power | 80 W |
| Solar Panel Type | Mono |
| Battery Energy | 400 Wh |
| LED Chip | Philips |
| Motion Detection Angle | 70 x 140 |
| Charging Time | 8 h |
| Working Time | ≥12 h |
| Rainy-Day Backup | 3 days |
| Pole Diameter | 60 mm |
| Installation Height | 5-7 m |
| Motion Detection Mode | No induction or customization |
| Mechanical Data | |
| Product Gross weight | 32.6 kg |
| Product Package dimensions | 1451 x 406 x 168 mm |
| Tailstock Package dimensions | 470 x 234 x 198 mm |
| Tailstock Gross weight | 7.9 kg |
| Build & Interfaces | |
| Weight | 32.6 kg |
| Package Dimensions | 1451 x 406 x 168 mm |
| Operating Conditions | |
| Discharge temperature | -10°C-60°C |
| Storage temperature | 0-55°C |
| Operating humidity | ≤90 %RH |
| Working temperature | 0-65°C |
| Protection Features | |
| Ingress Protection | IP65 |
| Operating Environment | |
| IP Rating | IP65 |
| Charging Temperature | 0-55 °C |
| Operating Temperature | -10 to 60 °C |
Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.
Availability & grid compliance in the UAE
| Market | UAE |
|---|---|
| Grid authority / regulator | DEWA, ADDC, SEWA |
| Quotation currency | AED |
| Support hours timezone | Asia/Dubai |
| Main cities | Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in the UAE that rests with the local authorities (DEWA, ADDC, SEWA). Confirm the grid code, import requirements and any local certification with them, or with us, before you order.
Key Features & Technical Highlights
- 80 W LED head, the step above the P2-60W and P2-40W in the same series
- All-in-one housing: monocrystalline module, LiFePO4 battery and LED head in one piece
- Built-in LiFePO4 lithium battery, so no separate battery enclosure hangs on the pole
- Philips LED chips for high light efficiency
- High-efficiency monocrystalline cells recharge the unit where it stands
- Ships as one 24.5 kg piece, packed 1040 x 460 x 185 mm
Frequently Asked Questions
How does the P2-80W arrive, and what does it weigh?
As one packed piece of 1040 x 460 x 185 mm weighing 24.5 kg gross. The monocrystalline module, the LiFePO4 battery and the 80 W LED head are already assembled inside the housing, so there is no second carton of electronics, battery enclosure or driver box to receive, store and match up on site.
How is the P2-80W different from the P2-60W and the P2-40W?
Lamp power. This is the 80 W head, one step above the 60 W and 40 W models in the same P2 street-light family. Specify it where poles stand further apart or the area to cover is wider; the smaller heads suit footpaths, short driveways and courtyards.
Does the P2-80W need mains power or an external battery?
No. It is an all-in-one unit: the monocrystalline module charges the built-in LiFePO4 battery through the day and the battery runs the LED head after dark. It works as a standalone light, and it can also sit alongside a wider site installation where the layout calls for it.
What does installing the P2-80W involve?
A stable mounting surface and the tools to secure a 24.5 kg piece to a bracket or pole, then the Felicity Solar installation guide for the wiring and orientation steps. We are an authorised Felicity Solar distributor and supply the P2-80W from our own stock.