Felicity Solar Lithium Batteries LPBF48200-H
A 51.2 V LiFePO4 pack holding 10 kWh, with a 120 A fifteen-second peak, an IP21 wall or floor cabinet, RS485 and CAN links, and an LCD+LED readout.
Models and prices
- LPBF48200-HAED 4,100incl. VAT
Technical Specifications
| Parameter | LPBF48200-H |
|---|---|
| Battery Data | |
| Battery Type / Chemistry | LiFePO4 |
| Battery Energy Capacity | 10kWh |
| Continuous Charge/Discharge Power | <4,000W |
| Peak Charge/Discharge Current | 120A |
| Depth of Discharge | ≥95% |
| Scalability / Max Expandable Capacity | Max. 6 pcs in Parallel(60kWh) |
| Cycle Life | >6,000 Cycles |
| Electrical / AC Output Data | |
| Nominal Voltage | 51.2V |
| Operating Voltage Range | 48-57.6V |
| Peak / Surge Power (W) | 6,000W |
| Protection Features | |
| Protection Features | Built-in Smart BMS, Fuse |
| IP Rating | IP21 |
| Communication | |
| Communication Interface | RS485/CAN |
| Display | LCD+LED |
| Mechanical Data | |
| Installation / Mounting | Wall-Mounted / Floor-Mounted |
| Weight | 72KG |
| Gross Weight | 86KG |
| Dimensions (W×H×D) | 664x468x213MM |
| Package Dimensions | 748x556x358MM |
Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.
Availability & grid compliance in the UAE
| Market | UAE |
|---|---|
| Grid authority / regulator | DEWA, ADDC, SEWA |
| Quotation currency | AED |
| Support hours timezone | Asia/Dubai |
| Main cities | Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in the UAE that rests with the local authorities (DEWA, ADDC, SEWA). Confirm the grid code, import requirements and any local certification with them, or with us, before you order.
Key Features & Technical Highlights
- 10 kWh of nominal energy on a 51.2 V bus, with depth of discharge rated separately at ≥95%
- Recommended continuous charge and discharge below 4,000 W, with a 6,000 W peak over 15 seconds
- Peak charge and discharge current of 120 A inside a 48–57.6 V operating range
- Up to 6 units in parallel for a 60 kWh bank
- Built-in smart BMS with fuse, RS485 and CAN communication, and an LCD+LED display
- IP21 wall- or floor-mounted cabinet, 664 × 468 × 213 mm at 72 kg, shipped as 748 × 556 × 358 mm at 86 kg
Frequently Asked Questions
How much energy does the LPBF48200-H hold?
10 kWh is the nominal energy of the LPBF48200-H, measured on its 51.2 V nominal bus. Depth of discharge appears as its own rating of ≥95%, and that row is what sets the drawable share — the 10 kWh number is not itself a usable-energy claim.
What continuous and peak power can the LPBF48200-H deliver?
Under 4,000 W is the recommended continuous charge and discharge power, and 6,000 W is the maximum over a 15-second window. Peak charge and discharge current is 120 A across those same 15 seconds.
How many LPBF48200-H batteries can be paralleled?
6 units in parallel, for 60 kWh. Each pack talks over RS485 and CAN, and a built-in smart BMS with a fuse handles protection, so the bank is built by repeating one model.
How long is the LPBF48200-H rated to last, and what warranty is published?
6,000 cycles is the floor — the LPBF48200-H is rated above that — and the published warranty term is 5 Years. Its operating voltage range runs from 48 V to 57.6 V.