Felicity Solar Lithium Batteries LPBF24300

A 25.6 V, 300 Ah LiFePO4 battery rated 7.5 kWh, the LPBF24300 runs up to six units in parallel for a 45 kWh bank, carries a built-in Smart BMS with fuse, and weighs 76 kg on a wall or floor mount.

Models Covered: LPBF24300

Manufacturer: Felicity Solar

Application: The Felicity Solar LPBF24300 is a 25.6 V LiFePO4 battery rated 300 Ah and 7.5 kWh, with a cycle life of ≥6000 and a depth of discharge above 95%. Up to six LPBF24300 units run in parallel for a maximum system capacity of 45 kWh, and a single pack weighs 76 kg. Its working window runs 24-28.8 V: charging tops out at 28.8 V and the cut-off sits at 24 V. Continuous duty is rated at a recommended 120 A, or 3000 W, of charge and discharge, while a 15-second peak of 200 A and 5000 W covers motor and compressor inrush. A built-in Smart BMS and a fuse handle protection, CAN and RS485 carry pack data to a compatible inverter, and an LCD screen with LED indicators reads out state on the unit itself. The enclosure measures 670 x 231 x 540 mm, mounts on a wall or stands on the floor, and is rated IP21 for indoor use. Charging runs from 0 to 55 °C and discharging from -20 to 60 °C. Cells are UN38.3 tested for transport, and the warranty on the LPBF24300 is 5 Years. We are an authorised Felicity Solar distributor.

Download PDF Datasheet Order now WhatsApp us

Models and prices

Technical Specifications

ParameterLPBF24300
Performance & Electrical
Battery TypeLiFePO4
Cut-Off Voltage24 V
Cycle Life≥6000
Depth of Discharge>95%
Max Charge/Discharge Power (15 s)5000 W
Max Charging Voltage28.8 V
Max Parallel Units6
Max System Capacity45 kWh
Nominal Capacity300 Ah
Nominal Energy7.5 kWh
Nominal Voltage25.6 V
Operating Voltage24-28.8 V
Peak Charge/Discharge Current (15 s)200 A
ProtectionBuilt-in Smart BMS, Fuse
Recommended Charge/Discharge Current120 A
Recommended Charge/Discharge Power3000 W
Build & Interfaces
CommunicationCAN, RS485
Display TypeLCD, LED
InstallationWall-Mounted, Floor-Mounted
Package Dimensions765 x 400 x 635 mm
Package Weight93 kg
Operating Environment
Charging Temperature Range0-55 °C
Discharging Temperature Range-20 to 60 °C
Protection DegreeIP21

Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.

Availability & grid compliance in the UAE

MarketUAE
Grid authority / regulatorDEWA, ADDC, SEWA
Quotation currencyAED
Support hours timezoneAsia/Dubai
Main citiesDubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah

Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in the UAE that rests with the local authorities (DEWA, ADDC, SEWA). Confirm the grid code, import requirements and any local certification with them, or with us, before you order.

For prices, see Felicity Solar Systems: Prices in UAE. Store pickup — collect your order from our store in Dubai or Riyadh.

Key Features & Technical Highlights

  • 300 Ah at 25.6 V nominal gives the LPBF24300 7.5 kWh of LiFePO4 storage in one pack
  • Six LPBF24300 units in parallel build a bank to the 45 kWh maximum system capacity
  • ≥6000 cycle life with a depth of discharge above 95%
  • 24-28.8 V working window, with 28.8 V maximum charging voltage and a 24 V cut-off
  • Recommended 120 A (3000 W) charge and discharge, peaking at 200 A (5000 W) for 15 seconds
  • 76 kg unit measuring 670 x 231 x 540 mm, wall- or floor-mounted and rated IP21

Frequently Asked Questions

How much energy does the LPBF24300 store?

7.5 kWh, from 300 Ah at a nominal 25.6 V. Depth of discharge is rated above 95%, so nearly all of that energy is available on every cycle, and the LPBF24300 is rated for ≥6000 cycles.

How many LPBF24300 batteries can be connected in parallel?

6 units. Six LPBF24300 packs in parallel reach the 45 kWh maximum system capacity, and CAN and RS485 carry pack data to a compatible inverter while an LCD screen and LED indicators show status on each unit.

What charge and discharge current does the LPBF24300 accept?

120 A is the recommended charge and discharge current, equal to 3000 W, with a 15-second peak of 200 A and 5000 W. Charging voltage tops out at 28.8 V, the cut-off is 24 V, and a built-in Smart BMS with a fuse supervises both directions.

How heavy is the LPBF24300 and where can it be installed?

76 kg, in an enclosure of 670 x 231 x 540 mm that mounts on a wall or stands on the floor. The IP21 rating means indoor, dry locations; charging runs 0-55 °C and discharging -20 to 60 °C. The shipping package measures 765 x 400 x 635 mm and weighs 93 kg.